Morin series S actuator MORIN Stainless steel spring return and double acting pneumatic quarter-turn actuators Output torques to 240,000 lb.in. Features and benefits • Innovative stainless steel construction as standard provides superior corrosion resistance both internally and externally. • Scotch yoke design using precision bearings eliminates dead band in the yoke mechanism, providing the greatest torque output at the beginning and end of stroke. • Heat-treated stainless steel thrust pin and rollers transfer piston force to 17-4PH stainless steel yoke by rolling to reduce friction, for longer life and more efficient torque transmission. • Bi-directional travel stops provide accurate valve rotation adjustment. • PTFE piston bearings, piston rod bushings and output shaft bushings provide longer life, reduce maintenance, and require no lubrication. • Universal design position indicator and pointer allows for either parallel or perpendicular mounting. • Stainless steel construction allows proximity switches to be direct-mounted in the actuator housing, eliminating the need to mount bracket and cam assemblies on top of the actuator. • NAMUR drive slot allows mounting of accessories closer to the actuator, resulting in a more compact, precise assembly, and eliminates the need for coupling. • Spring return model design requires no special tools to safely and easily disarm the spring in the field, reducing down time and providing a ‘man safe’ spring. General applications For remote control of any quarter-turn application: ball, butterfly, rotary plug or damper style valves, etc. To be used in chemical process, food and beverage, iron and steel, off-shore marine, pharmaceutical, power, oil and gas, pulp and paper, and textile industries. www.pentair.com/valves Technical data Supply pressure : 40 to 160 psig (see torque charts MORMC-0333) Supply medium :Air or any gas compatible with materials of construction Temperature rating Standard range : -20°F to 210°F Optional range : -65°F to 300°F Angular rotation : 90 degrees ± 8 degrees Pentair reserves the right to change the contents without notice MORMC-0024-US-1305 Morin series S actuator Morin has a heart of stainless steel Morin stainless steel yoke The heart of any scotch yoke actuator is the yoke. Morin uses 17-4PH stainless for this critical area as standard. The yoke is the mechanism used to convert linear force to torque. This area is most often where the life of the actuator is controlled. Principles of construction Using high quality materials of construction and modern rugged design concepts Morin becomes the standard for low cost valve actuation while providing high quality performance. The S actuator housings are all machined from 316 stainless steel castings. This produces a rugged, low cost product through reduced machining time and by eliminating wasteful excess material. Any components that rotate or slide during operation, such as the high strength stainless steel output shaft, stainless steel piston rod, stainless steel thrust pin or the stainless steel piston, are all supported by replaceable friction reducing bearings. Bi-directional travel stops Adjustable stops on each end cap provide the flexibility of accurate valve rotation positioning at the end of the ‘open’ and ‘close’ stroke. Both stops are located on the cylinder centerline, the optimal position to maximize travel adjustment and eliminate any detrimental side loading on the travel stops. Adjustable from 82° to 98°. Ingress protection Actuator meets IP66 and IP67 for standard units. Spring designed for safety All spring return models incorporate a ‘man-safe’ spring design that allows the actuator to be safely assembled and disassembled in the field without the need for special tools. The integral tie rods are bored and tapped to provide a means of loading and unloading the spring in a safe and convenient manner. Scotch yoke torque characteristics Single acting spring return 125 125 Air break 100 Spring break Break torque 100 Spring stroke Air stroke 75 Torque 75 Torque Available options • Jackscrew override • Hydraulic override • Full stroke adjustment • Proximity preparation • Lockout device • Partial stroke test Double acting air to air 50 Spring end 25 0° 45° Stroke Air end Running torque 50 25 90° 0° Pentair reserves the right to change the contents without notice 45° Stroke 90° page 2 Morin series S actuator Materials of construction Double acting - Models 003 to 100 Bearings PTFE composite Scotch yoke 17-4PH stainless steel with 440C roller bearings Housing and end caps 316 stainless steel Piston 316 stainless steel Piston bearing PTFE Piston rod bearings PTFE or bronze (depending on model) Cylinders 316 stainless steel Double acting - Models 135 to 1150 Bearings PTFE composite Scotch yoke 17-4PH stainless steel with 440C roller bearings Housing and end caps 316 stainless steel Piston 316 stainless steel Piston bearing PTFE Piston rod bearings PTFE or bronze (depending on model) Pentair reserves the right to change the contents without notice Cylinders 316 stainless steel page 3 Morin series S actuator Options Manual options To provide the actuation package best suited for your application, the Morin line offers a full range of manual accessories. Partial stroke test device (PSTD) Provides a method of testing ESD packages without shutdown. Lockout Integral lockout allows safe shutdowns for maintenance and isolation of systems. Jackscrew override (JSO) Manual operation when power is lost. Simple and effective. Hydraulic override (MHP) Manual operation when power is lost. Includes speed controls. AWWA Tested per American Waterworks Association C540. Available for pneumatic or water service operation. Direct mounting cast adapters Many valve top works covered, including some ISO mounting. Assures economic but correct mounting alignment. ±°F/°C Full stroke adjuster Provides mechanical control of maximum and/ or minimum valve stroke. Proximity switch preparation Allows installation of cartridge style proximity switches. Leaves top works open for mounting of other devices. Pentair reserves the right to change the contents without notice page 4 High or low temperature ratings Standard rating of -20°F to 210°F [-29°C to 99°C] covers most applications. Optional ratings down to -65°F [-54°C] and up to 300°F [149°C]. Morin series S actuator Mechanical data Notes Mechanical data 1.Air consumption: Cubic inches shown in chart represent actual free air volume in cylinder between piston and end cap when furthest apart. Air consumption will vary depending on supply pressure. To determine standard cubic feet per minute use the following formula: ( _____)(______________)( Vol. in² Supply air barg +14.7 1728 14.7 ) Strokes/min Example: Calculate SCFM for model 023 double acting using 80 psig air supply and 5 strokes/minute. SCFM = ( )( 45 ______ 1728 )( ) 80 +14.7 _______ 14.7 5 SCFM = 0.97 2.Cycle times shown represent average time to stroke 90 degrees using standard pilot valves and should be used as a guide only. Cycle times can be increased or decreased dramatically by using speed controls, oversized pilot valves or quick exhaust valves. Actuator NumberCylinder model of bore Stroke pistons (inch) (inch) Volume¹ (cubic in) 90° stroke Cycle time² (seconds) 90° stroke Weight (lbs.) Double acting 003 006 012 023 036 050 072 100 135 210 270 370 420 575 740 1150 1480 2380 1 1 2 1 1 1 2 2 1 1 2 1 2 1 2 2 2 2 2.250 2.750 2.750 4.375 5.438 6.250 5.438 6.250 8.250 10.250 8.250 12.250 10.250 15.500 12.250 15.500 12.250 15.500 1.5 2 2 3 3 3 3 3 5 5 5 6 5 6 6 6 12 12 6 12 23 45 70 92 137 182 267 413 526 707 816 1132 1395 2245 2744 4444 0.3 0.5 0.7 1.0 1.5 2.2 2.5 3.0 4.5 5.0 6.0 8.0 8.5 9.5 10.0 12.0 20.0 24.0 5 10 12 27 30 36 37 46 165 185 210 390 257 519 530 775 850 1050 1 1 2 1 1 2 2 2 1 1 2 1 2 1 2 2 2 2 2.250 2.750 2.750 4.375 5.438 4.375 5.438 6.250 8.250 10.250 8.250 12.250 10.250 15.550 12.250 15.550 12.250 15.500 1.5 2 2 3 3 3 3 3 5 5 5 6 5 6 6 6 12 12 6 12 23 45 70 88 137 182 267 413 526 707 816 1132 1395 2245 2744 4444 0.3 0.5 0.7 1.0 1.5 2.0 2.5 3.0 4.5 5.0 6.0 8.0 8.5 9.5 10.0 12.0 20.0 24.0 6 11 14 34 42 43 55 64 210 235 250 540 379 779 704 1082 1650 1850 Spring return 003 006 012 023 036 046 072 100 135 210 270 370 420 575 740 1150 1480 2380 Typical section double acting/one piston Typical section spring return/two pistons Pentair reserves the right to change the contents without notice page 5 Morin series S actuator Output torques Scotch yoke mechanics Stroke in degrees -5 0° 5 10 15 20 25 30 35 40 45° 50 55 60 65 70 75 80 85 90° 95 Piston rod stroke X A Moment arm minimum (X) at mid stroke (45°) Y X = Min. moment arm Y = Max. moment arm Moment arm maximum (Y) at end of stroke (90°) Normal 90° stroke Conclusion: Greatest torque output is at beginning and end of stroke-where it’s needed! 100° stroke For moment arm length at any stroke position multiply min. moment arm by 1/Cos A. Output torques (lb. in.) double acting - air to air Actuator Air supply (psig) model 405060 708090100110 120 130 140 150 160 Start / End 003 Minimum Start / End 006 Minimum Start / End 012 Minimum Start / End 023 Minimum Start / End 036 Minimum Start / End 050 Minimum Start / End 072 Minimum Start / End 100 Minimum Start / End 135 Minimum Start / End 210 Minimum Start / End 270 Minimum Start / End 370 Minimum Start / End 420 Minimum Start / End 575 Minimum Start / End 740 Minimum Start / End 1150 Minimum Start / End 1480 Minimum Start / End 2380 Minimum 173 110 300 235 690 470 1150 855 1980 1370 2500 1840 3960 2740 5000 3680 7088 5250 11550 8160 14175 10500 19795 13080 21000 16320 31913 22440 38850 26160 60375 44880 74000 46621 119000 75506 219 140 375 290 863 580 1450 1070 2475 1710 3125 2300 4950 3425 6250 4600 8862 6565 14438 10200 17719 13125 24744 16350 26250 20400 39849 28050 48563 32700 75469 56100 92500 58276 148750 94383 259 165 450 350 1035 700 1725 1285 2970 2055 3750 2760 5940 4110 7500 5520 10631 7875 17325 12240 21263 15750 29693 19620 31500 24480 47869 33660 58275 39240 90563 67320 111000 69931 178500 113259 305 190 525 405 1208 810 2010 1500 3465 2400 4375 3220 6930 4790 8750 6440 12406 9185 20213 14280 24806 18375 34641 22890 36750 28560 55833 39270 67988 45780 105656 78540 129500 81586 208250 132136 345 220 600 460 1380 940 2300 1710 3960 2740 5000 3680 7920 5480 10000 7360 14175 10500 23100 16320 28350 21000 39590 26160 42000 32640 63825 44880 77700 52320 120750 89760 148000 93242 238000 151013 391 250 675 520 1553 1050 2585 1925 4455 3080 5630 4140 8910 6160 — — 15950 11810 25988 18360 31894 23625 44539 29430 — — 71806 50490 87413 58860 — — 166500 104897 — — 431 280 750 575 1725 1170 2875 2140 4950 3425 6250 4600 9900 6850 — — 17724 13125 28875 20400 35438 26250 49488 32700 — — 79781 56100 97125 65400 — — 185000 116552 — — See www.morinact.com for complete torque book. Pentair reserves the right to change the contents without notice page 6 472 310 825 640 1898 1275 3160 2350 5445 3770 6875 5060 10780 7540 518 330 900 690 2070 1405 3450 2570 5940 4110 7500 5520 11880 8220 — — 975 750 — — 3740 2780 6435 4450 8125 5980 – – — — 1050 810 — — 4020 3000 6930 4800 8750 6440 — — 1125 870 — — 4300 3210 7425 5140 9375 6900 — — 1200 940 — — 4600 3420 7920 5480 10000 7360 MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 100 psi 19488 21263 23037 24812 26576 14440 15750 17060 18375 19690 31763 34650 37538 40425 43313 22440 24480 26520 28560 30600 38981 42525 — — — 28875 31500 — — — 54436 59385 64334 69283 74231 35970 39240 42510 45780 49050 — — — — — — — — — — 87757 95738 103718 111694 119669 61710 67320 72930 78540 84150 106838 116550 MAXIMUM OPERATING 71940 78480 PRESSURE = 120 psi — — MAXIMUM OPERATING — — PRESSURE = 120 psi 203500 222000 MAXIMUM OPERATING 128207 139862 PRESSURE = 120 psi — — MAXIMUM OPERATING — — PRESSURE = 120 psi 28350 21000 46200 32640 — — 79180 52320 — — 127650 89760 Morin series S actuator Output torques Output torques (lb. in.) single acting - spring return Actuator Air supply (psig) model 40 50 60 70 80 90 100 110 Start 003 Minimum End Start 006 Minimum End Start 012 Minimum End Start 023 Minimum End Start 036 Minimum End Start 046 Minimum End Start 072 Minimum End Start 100 Minimum End Start 135 Minimum End Start 210 Minimum End Start 270 Minimum End Start 370 Minimum End Start 420 Minimum End Start 575 Minimum End Start 740 Minimum End Start 1150 Minimum End Start 1480 Minimum End Start 2380 Minimum End 110 50 55 195 99 110 390 208 231 750 360 400 1170 567 630 1500 720 800 2340 1134 1260 3250 1575 1750 4390 2554 2838 6825 3639 4043 8780 4683 5203 12025 6701 7446 13650 6946 7718 18690 9507 10563 24050 13404 14893 37375 19018 21131 48100 23310 25900 77350 37485 41650 135 63 70 245 123 137 485 263 292 945 459 510 1460 711 790 1870 905 1005 2925 1418 1575 4060 1971 2190 5485 3186 3540 8530 4544 5049 10970 5846 6496 15030 9403 10448 17060 8685 9650 23360 11888 13209 30060 16757 18619 46720 23767 26408 60125 29138 32375 96688 46857 52063 160 185 72 86 80 95 290 340 151 175 168 194 585 680 312 366 347 407 1125 1305 540 635 600 705 1755 2050 855 990 950 1100 2250 2615 1080 1269 1200 1410 3510 4095 1701 1985 1890 2205 4880 5690 2358 2754 2620 3060 6580 7680 3829 4466 4254 4962 10240 11940 5455 6366 6061 7073 13160 15355 7019 8187 7799 9097 18040 21045 10050 11727 11167 13030 20475 23890 10418 12153 11576 13503 28030 32700 14261 16642 15845 18491 36075 42090 20105 23453 22339 26059 56060 65400 28530 33283 31700 36981 72150 84175 34965 40712 38850 45235 116025 135363 56228 65599 62475 72888 210 95 105 390 199 221 780 416 462 1500 720 800 2340 1134 1260 3000 1440 1600 4700 2250 2500 6500 3150 3500 8775 5103 5670 13650 7277 8085 17550 9356 10395 24050 13404 14893 27300 13892 15435 37375 19018 21131 48100 26807 29785 74750 38037 42263 96200 46620 51800 154700 74970 83300 — — — — — — — — — — — — — — — — — — 1680 1870 815 905 905 1005 2630 2925 1274 1418 1415 1575 — — — — — — — — — — — — — — — — — — 9875 10970 5740 6377 6378 7086 15350 17060 8187 9098 9097 10109 19746 21940 10524 11693 11693 12992 27055 30060 15080 16757 16756 18619 30705 34120 15630 17369 17367 19299 42045 46720 21390 23767 23767 26408 54108 60120 30163 33514 33514 37238 84090 93440 42790 47534 47544 52815 108225 120250 52448 58275 58275 64750 174038 193375 84342 93713 93713 104125 — — — — — — — — — — — — — — — — — — 120 130 140 150 160 — — — — — — — — — 2250 1080 1200 3510 1701 1890 — — — — — — — — — — — — — — — 3880 1880 2090 — — — — — — — — — — — — 2615 1269 1410 4095 1985 2205 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 3000 1440 1600 4700 2250 2500 — — — 15355 8932 9924 23890 12731 14146 — — — — — — 17550 10206 11340 27300 14553 16170 MAXIMUM OPERATING PRESSURE = 100 psi MAXIMUM OPERATING PRESSURE = 100 psi — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 13160 7657 8508 20475 10915 12128 — — — 36075 20105 22339 — — — 56060 28530 31700 — — — — — — — — — — — — — — — — — — MAXIMUM OPERATING PRESSURE = 120 psi — — — — — — — — — 42090 23453 26059 — — — 65400 33283 36981 — — — — — — — — — 48100 26807 29785 — — — 74750 38037 42263 MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi MAXIMUM OPERATING PRESSURE = 120 psi Torque shown is balanced (i.e. spring ending = air ending torque). See Bulletin No. MUTC-0702 for unbalanced torque output. Pentair reserves the right to change the contents without notice page 7 Morin series S actuator Dimensions Models 012, 046, 072, 100 A Q typical B C 1 (sq) C 2 (sq) G Boss for proximity switch option P NPT typical H diameter E Models 003, 006, 023, 036 and 050 A D Q typical B M 316 SS J K L F (dia) C 1 (sq) Boss for proximity switch option (excluding Model 003) G H diameter Notes 1. Shown without pointer for clarity. 2.For mounting dimensions, refer to pages 12 and 13. Pentair reserves the right to change the contents without notice page 8 P NPT typical Morin series S actuator Dimensions Dimensions (inches), double acting ModelA B 003DA 006DA 012DA 023DA 036DA 050DA 072DA 100DA 9.06 12.34 12.74 18.60 18.48 18.49 19.33 19.35 3.50 5.97 6.37 8.81 8.81 8.81 9.67 9.68 C1C2DE FG H J KLMPQ 2.69 3.18 3.18 4.81 5.81 7.13 5.81 7.12 — — 3.18 — — — 5.81 7.12 3.06 3.91 3.91 5.78 6.28 6.94 6.28 6.94 — — 4.81 — — — 6.38 6.38 0.75 1.00 — 1.43 1.43 1.43 — — — 0.10 0.10 0.25 0.75 1.41 0.75 1.41 1.00 1.38 1.38 1.75 1.75 1.75 1.75 1.75 1.37 1.50 1.50 2.16 2.16 2.16 2.16 2.16 2.75 3.00 3.00 4.31 4.31 4.31 4.31 4.31 3.25 4.75 4.75 6.69 6.69 6.69 6.69 6.69 1.00 1.31 1.31 1.88 1.88 1.88 1.88 1.88 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 0.62 1.00 1.00 1.15 1.25 1.25 0.83 0.75 Dimensions (inches), spring return ModelA B 003SR 006SR 012SR 023SR 036SR 046SR 072SR 100SR 9.06 14.44 14.84 21.82 23.51 22.80 24.37 24.38 3.50 5.97 6.37 8.81 8.81 9.79 9.67 9.68 C1C2DE FG H J KLMPQ 2.69 3.18 3.18 4.81 5.81 4.81 5.81 7.12 — — 3.18 — — 4.81 5.81 7.12 3.06 3.91 3.91 5.78 6.28 5.93 6.28 6.94 — — 4.55 — — 6.24 5.99 5.99 0.75 1.00 — 1.43 1.43 — — — — 0.10 0.10 0.25 0.75 0.25 0.75 1.41 1.00 1.38 1.38 1.75 1.75 1.75 1.75 1.75 1.37 1.50 1.50 2.16 2.16 2.16 2.16 2.16 2.75 3.00 3.00 4.31 4.31 4.31 4.31 4.31 Pentair reserves the right to change the contents without notice 3.25 4.75 4.75 6.69 6.69 6.69 6.69 6.69 1.00 1.31 1.31 1.88 1.88 1.88 1.88 1.88 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 0.62 1.00 1.00 1.25 1.25 1.25 1.25 1.25 page 9 Morin series S actuator Dimensions Models 270, 420, 740, and 1150 A B Q typical C G P NPT typical H diameter E Models 135, 210, 370 and 575 D A M Q typical B J K F diameter L C G P NPT typical H diameter Models 1480 and 2380 A D B M Q typical J K C E Notes 1. Shown without pointer for clarity. 2. For mounting dimensions, refer to pages 12 and 13. Pentair reserves the right to change the contents without notice page 10 G P NPT typical Morin series S actuator Dimensions Dimensions (inches), double acting ModelAB C D E 135DA 210DA 270DA 370DA 420DA 575DA 740DA 1150DA 1480DA 2380DA 32.87 33.26 33.99 41.64 34.75 42.42 44.15 45.39 70.65 88.29 15.88 15.88 16.99 19.75 17.38 19.75 20.07 22.69 35.85 36.51 9.50 11.50 9.50 13.50 11.50 17.00 13.50 17.00 13.50 17.00 10.44 11.44 10.44 16.75 11.44 18.50 16.75 18.50 21.57 22.08 — — 11.72 — 11.22 — 15.50 14.88 26.94 25.06 F G H J K L MPQ 2.75 2.75 — 3.50 — 3.50 — — — — 1.00 2.00 1.00 2.69 2.00 4.50 2.69 4.50 0.44 2.19 — — — 6.00 — 6.00 6.00 6.00 — — 4.38 4.38 4.38 5.44 4.38 5.44 5.44 5.44 7.06 7.06 8.13 8.13 8.13 9.50 8.13 9.50 9.50 9.50 13.38 13.38 11.82 11.82 11.82 14.81 11.82 14.81 14.81 14.81 — — 3.19 3.19 3.19 6.88 3.19 6.88 6.88 6.88 7.58 7.58 3/8 1/2 3/8 1/2 1/2 3/4 1/2 3/4 1/2 3/4 1.50 2.00 1.50 1.50 1.75 2.00 1.50 1.85 2.15 2.50 Dimensions (inches), spring return ModelAB C D E 135SR 210SR 270SR 370SR 420SR 575SR 740SR 1150SR 1480SR 2380SR 39.46 42.67 40.57 52.00 44.17 54.25 53.96 57.25 86.98 88.29 15.88 15.88 16.99 19.75 17.38 19.75 22.07 22.69 35.85 36.51 9.50 11.50 9.50 13.50 11.50 17.00 13.50 17.00 13.50 17.00 10.44 11.44 10.44 16.75 11.44 18.50 16.75 18.50 21.57 22.08 — — 10.95 — 10.36 — 14.75 13.75 26.30 25.10 F G H J K L MPQ 2.75 2.75 — 3.50 — 3.50 — — — — 1.00 2.00 1.00 2.69 2.00 4.50 2.69 4.44 0.44 2.19 — — — 6.00 — 6.00 6.00 6.00 — — 4.38 4.38 4.38 5.44 4.38 5.44 5.44 5.44 7.06 7.06 8.13 8.13 8.13 9.50 8.13 9.50 9.50 9.50 13.38 13.38 Pentair reserves the right to change the contents without notice 11.82 11.82 11.82 14.81 11.82 14.81 14.81 14.81 — — 3.19 3.19 3.19 6.88 3.19 6.88 6.88 6.88 7.58 7.58 3/8 1/2 3/8 1/2 1/2 3/4 1/2 3/4 1/2 3/4 1.75 2.12 1.75 1.75 2.12 2.50 2.12 2.50 2.50 2.50 page 11 Morin series S actuator Mounting details Model 003 - Top and bottom of housing (symmetrical) 7/16 typ. SYM. 1/4 - 20 UNC***** tap x 0.50 deep on 1.500 sq. bolt pattern A 0.438 square 0.435 0.44 0.157/0.160 wide 0.197/0.205 deep drive slot A Section A - A Models 006 to 100 and 144 - Top and bottom of housing (symmetrical) 1.00 typ. SYM. B Models 006 and 012 = 0.746/0.743 Models 023 to 100 = 0.998/0.995 Models 006 and 012 = 0.87 Models 023 to 100 = 1.18 Models 006 and 012 = 5/16 - 18 UNC* tap x 0.37 deep on 2.000 sq. bolt pattern Models 023 to 100 = 3/8 - 16 UNC** tap x 0.37 deep on 3.000 sq. bolt pattern 0.157/0.160 wide 0.197/0.205 deep drive slot NAMUR drive both ends B Section B - B Models 135, 210, 270 and 420 - Bottom of housing ISO 5211-F16 3/4 2.000/1.994 diameter shaft 1/2 sq. x 3.19 long keyway with 0.031 radius inside key way corners (to be used with 1/2” x 3 3/16” key) C - 10 UNC*** tap x 1.18” deep (4) places as shown on 6.500 diameter bolt circle 3.69 1.18 C Section C - C Models 135, 210, 270 and 420 - Top of housing - Mounting details 3.150 Metric thread option SHUT NAMUR adapter OPEN M5 x 0.80 tap x 3/8” deep (4) places on NAMUR pattern OPEN 0.251 C’bore x 0.209 deep M6 tap x 1/2” deep 1.181 0.197 0.205 SHUT 0.998/0.995 square 0.157/0.160 wide x 0.197/0.205 deep NAMUR accessory drive slot Pentair reserves the right to change the contents without notice 1.18 Standard tap Model number * ** *** ***** 006 and 012 023 to 100 135 to 1150 003 M8 M10 M20 M6 Replace ‘U’ with ‘M’ in order number designation (refer to page 6). page 12 Morin series S actuator Mounting details Models 370, 575, 740 and 1150 - Bottom of housing ISO 5211-F30 3.000/2.994 diameter shaft 3/4 sq. x 3.75 long keyway with 0.031 radius inside key way corners (to be used with 3/4” x 318/16” key) D 5.31 3/4 - 10 UNC* tap x 1.18” deep (8) places as shown on 11.73 diameter bolt circle 1.18 4.56 22.5° typ. D Section D - D Models 370, 575, 740 and 1150 - Top of housing - Mounting details 3.68 SHUT 0.251 C’bore x 0.209 deep M6 tap x 1/2” deep NAMUR adapter 1.61 OPEN OPEN M5 x 0.80 tap x 3/8” deep (4) places on NAMUR pattern 1.181 x 5.118 rectangle 0.197 0.205 0.998/0.995 square SHUT 1.18 0.157/0.160 wide x 0.197/0.205 deep NAMUR accessory drive slot Models 1480 and 2380 - Bottom of housing ISO 5211-F35 45° Female drive 6.250 dia. bore x 11” deep 1.501 rectangular keyway with 0.12 radius inside keyway corners (to be used with 11/2” x 1” rectangle key) 1 - 8 UNC*** tap x 13/4” deep (8) places as shown on 14.02 diameter bolt circle E 1.18 22.5° typ. E Section E - E Models 1480 and 2380 - Top of housing - Mounting details 3.150 0.251 C’bore x 0.209 deep M6 tap x ½” deep NAMUR adapter 1.181 M5 x 0.80 tap 3/8” deep (4) places on NAMUR pattern 0.996/0.993 square 0.197 0.205 1.18 Metric thread option Standard tap Model number * M20 *** M30 370 and 575 to 1150 1480 and 2380 Replace ‘U’ with ‘M’ in order number designation (refer to page 6). 0.157/0.160 wide x 0.197/0.205 deep NAMUR accessory drive slot Pentair reserves the right to change the contents without notice page 13 Morin series S actuator Model numbering S -270 U - D 00 0 -JSO Actuator model S – Stainless steel Actuator size Model code based on approx. torque symmetrical double acting at 80 psig 003 072 575 006 100 740 012 135 1150 023 210 1480 036 270 2380 046 370 050 420 Interface bolting U – UNC mounting threads M – Metric mounting threads Function D – Double acting S – Spring return Configurations Spring code denotes air pressure divided by 10 where spring force gives the same spring end torque as air end torque using symmetric yoke. 00 – No spring (double acting) 04 – 40 pound spring 05 – 50 pound spring 06 – 60 pound spring Etc.See Morin Torque Book (MORMC-0333) for available springs Spring return failure rotation 0 – No spring (double acting OR actuator rotates clockwise on loss of air) 1 – Actuator rotates counterclockwise on loss of air Option (blank) – No options (standard configuration) Note: Some codes can be used in combination. Indicate by stacking “ separated by “-”. Consult your sales representative for possible combinations. How to order 1. Double acting example: Air supply: 80 psig Break torque: 7,200 lb.in. S-072U-D000 S: Series 072: Model number U: UNC mounting threads D000: Double acting 2. Spring return example: Air supply: 80 psig Ending torque: 12,950 lb.in. Fail rotation: Clockwise S-370U-S080 S: Series 370: Model number U: UNC mounting threads S080: Spring set Pentair reserves the right to change the contents without notice page 14 3.For all spring return models: • Use air pressure to determine spring set. • All spring sets ending with “0” fail clockwise (40, 50, 60, etc.). • All spring sets ending with “1” fail counterclockwise (41, 51, 61, etc.). Morin series S actuator Stainless steel control monitors and transmitters* Touch set cams in all control monitors are hand adjustable, spring loaded and self-locking providing quick calibration of position sensors. Terminal strips are pre-wired and color coded with generous working space for ease of use and extra wiring points for solenoid integration. All units are standard with multiple conduits for easy field wiring and accessory mounting. All AccuTrak™ and Quantum™ products utilize common bolt pattern for mounting to actuators and can be supplied with mounting hardware as needed. Low copper content aluminum enclosures (0.2% maximum copper content) insure robust performance in corrosive environments. Control transmitters utilize non-contact Hall Effect sensing technology and digital position transmission via 4-20 mA signal. Transmitters are available with both HART® and Foundation Fieldbus™ digital communication protocols. AccuTrak/Quantum 366 Digital EPIC D470 Digital EPIC D450 Network solutions* Intellis is a family of industrial control field Network Control Monitors which use embedded control systems to automate valves and link field I/O to the host PLC or DCS. Each monitor is assigned a unique address and accepts input/output signals from valve position sensors, solenoids and external alarm and control devices. Hall Effect sensors are utilized for valve position monitoring. Low-power Falcon solenoid valve provides integrated actuation control. Network interface modules Pacs allow communication via a protocol of choice. Westlock Intellis Network Control Monitors are available for linear or rotary applications in all area classifications. Intellis control monitor Notes: * Stainless steel, AccuTrak, Quantum, Intellis Network Solutions and Positioners - please consult your sales representative for the availability of global certifications such as ATEX, IEC, GOST, CSA and InMetro for specific configurations in these product lines, as approvals may vary. Pentair reserves the right to change the contents without notice page 15 Morin series S actuator Also available The series B and C actuators Setting a new standard in actuation at a price you’d expect from a commodity product. • Up to 160 psig operating pressure (see torque chart, MORMC-0333). •Double acting break torques to 1,400,000 lb.in. • Spring end torques to 583,288 lb.in. For additional information, refer to datasheet MORMC-0023. Ductile iron 316 stainless steel (series B) Carbon steel (series C) PTFE Chrome-plated steel Sintered bronze or PTFE composite 17-4 PH stainless steel or ductile iron The series HP actuator High pressure actuation with carbon steel cylinders for superior corrosion resistance. • Up to 2250 psi operating pressure (see torque chart, MORMC-0333). • Double acting torques to 800,000 lb.in. • Spring end torques to 400,000 lb.in. For additional information, refer to datasheet MORMC-0072. Pentair Valves & Controls provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to Pentair products and services. Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. PENTAIR MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, PENTAIR WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Pentair reserves the right to change product designs and specifications without notice. All registered trademarks are the property of their respective owners. Printed in the USA. Pentair reserves the right to change the contents without notice page 16
© Copyright 2024 Paperzz