ITEM NO.
PHOTOELECTRIC
EYE
FLAKE ICE
FLAKE ICE
Versatile, inexpensive to
produce, used in salad
bars, produce and fish
displays.
PHOTOELECTRIC EYE
For maximum bin storage, photoelectric eye
turns machine off when
ice level reaches chute.
This product qualifies for the following listings:
TOP BEARING
Extra large top bearing
attached to auger and
breaker reduces bearing
wear.
FME2400
The FME2400 represents Scotsman’s commitment to
R-404A Refrigerant (DuPont SUVA® HP62) as the
sensible permanent solution to the refrigerant issue.
LONG SERVICE LIFE
• Evaporator, auger and breaker are all fabricated
from durable stainless steel.
• Innovative “Interrupted Flight” auger design
minimizes bearing loads.
• New gearmotor design includes heavy duty ball
bearings.
• Large spherical top roller bearing self aligns,
reducing bearing wear.
ENHANCED RELIABILITY
• Advanced electronics eliminate mechanical
switches and sensors.
• Electronic water level control prevents problems
associated with water pressure fluctuations.
• Continuous length evaporator refrigerant tubing
eliminates potential refrigerant leaks.
IMPROVED EFFICIENCY
• Photoelectric eye bin control allows maximum
storage in bin.
• Continuous ice making, no hot gas cycle, no water
dump.
• Lower KWH usage per 100 lbs. of ice than cubers.
LOWER SERVICE COSTS
• Most major components are accessible from
the machine front. Less repair time equals less
repair costs.
• Installation made easy by placing all utility
connections on back panel, accepting standard
plumbing fittings.
• System design minimizes cost of component failure.
VERSATILITY
• Fits a variety of Scotsman Ice Storage Bins – the
modular design allows the user to choose the right
bin for their needs.
REMOTE CONDENSER
• Heat removed during icemaking is carried to the
remote condenser directly by refrigerant. There
the heat is transferred to the outdoor air, and the
refrigerant returns to the icemaker.
• Fan motor operates from icemaker electrical supply.
• Choice of 25 foot or 40 foot precharged refrigerant.
• Line with easy to install quick connect couplings.
ENVIRONMENTALLY RESPONSIBLE
• HFC R-404A refrigerant.
• Non-CFC foam insulation.
WARRANTY PROTECTION
See Dealer for details of Limited Warranty.
•
•
•
•
24 Month Factory Labor.
24 Months on all parts.
5 Years on Compressor.
Directory of Certified Dealer Service.
Ice Systems The World Relies On.™
775 CORPORATE WOODS PARKWAY • VERNON HILLS, IL 60061 • (847) 215-4550
FAX (847) 913-9844
E-mail: [email protected]
S-170
Consultant/Contractor Approval
Printed in U.S.A.
3.5M 9-97
C.S.I. File No. 11400
Modular Air, Water, Remote
Cooled Flake Ice Machine
FME2400
MODULAR AIR, WATER, REMOTE, REMOTE HIGH SIDE COOLED FLAKE ICE MACHINE
61.0 CM.
24.00 IN.
10.75
27.31
33.36
84.73
BACK
VIEW
AIR
COOLED
2.75
6.98
.50
1.27
SIDE
VIEW
68.6CM.
27.00 IN.
14.53
36.90
DRAIN
3/4" FPT
1.9 CM. FPT
.50 DISCHARGE
1.27 LINE
QUICK
CONNECT
FITTING
2
LIQUID LINE
QUICK CONNECT
FITTING
END VIEW
6.12
15.54
2.04
5.18
16.73
42.49
ACCESS PANEL
EACH END
13.3 CM.
5.25 IN. 7.6 CM.
3.00 IN.
23.81
60.48
2
DISCHARGE LINE
QUICK CONNECT
FITTING
.38
.95
FRONT VIEW
AIR INT AKE
24.1 CM.
9.50 IN.
47.6 CM.
18.74 IN.
48.0 CM.
18.90 IN.
Remote
Condenser
AIR DISCHARGE
11.55
29.59
.38 LIQUID
.95 LINE
QUICK
CONNECT
FITTING
(ALL UNITS)
ADJUSTABLE ROOF
CLEARANCE
18.00 24.00
45.72 60.96
12.00
30.48
11.55
29.59
2
ELECTRICAL INLET
POTABLE WATER
INLET 3/8"/1.0 CM FPT
Ø .53 (6)
1.35
19.57
49.96
2.07
5.26
DUAL CIRCUT CONNECTIONS ARE FOR
ERC302-32A AND ERC402-32A ONLY
REMOTE DISCHARGE OUTLET
MALE COUPLING
1/2" / 1.3 CM. (2) PLCS (REMOTE ONLY)
106.7CM.
42.00 IN.
39.4CM
15.53 IN
7.9CM
3.10 IN
Back View
Water &
Remote
Cooled
UTILITY CONNECTIONS 15.2 CM. MIN. / 6.00 IN MIN.
REMOTE DISCHARGE
OUTLET
MALE COUPLING
1/2" / 1.3 CM (2) PLCE
(REMOTE ONLY)
53.3 CM
21.00 IN
7.9CM
3.10 IN
CONDENSER INLET (WATER COOLED ONLY)
3/8" 1.0 CM. FPT
PLAN VIEW - FRONT
52.9 CM
20.54 IN
46.4CM.
18.28 IN.
ICE CHUTE OPENINGS
6.7 X 15.7 CM
2.64 X 6.20 IN
11.4 CM
4.50 IN
26.7 CM
10.50 IN
29.6CM
9.43 IN
13.3 CM
5.25 IN 7.6CM
3.00 IN
37.8 CM
14.90 IN
40.1 CM/15.80 IN
45.2 CM / 17.80 IN
35.2 CM.
12.84 IN.
47.8 CM / 18.80 IN
55.0 CM / 21.66 IN
FRONT VIEW
88.5 CM.
34.84 IN.
REMOTE CONDENSER
JUNCTION BOX
ELECTRICAL INLET
POTABLE WATER INLET
3/8" / 1.3 CM. FPT
DRAIN 3/4" / 1.9 CM. FPT
CONDENSER DRAIN
(WATER COOLED ONLY)
1/2" / 1.3 CM. FPT
INSTALLATION NOTE: Allow 6 minimum space at back for ventilation and utility connections.
All models:
Dimensions: W x D x H
Model
Cond.
Unit
FME2400AE-32A
FME2400AE-3A
FME2400WE-32A
FME2400WE-3A
FME2400RE-32A
FME2400RE-3A
Air
Air
Water
Water
Remote
Remote
2455
2455
2390
2390
1960*
1960*
1800
1800
2020
2020
1780**
1780**
Finish
***
Ship Wt.
lbs./kg.
Basic
Electrical
Volts/Hz/Phase
EG
EG
EG
EG
EG
EG
395/180
395/180
390/178
390/178
425/194
425/194
208-230/60/1
208-230/60/3
208-230/60/1
208-230/60/3
208-230/60/1
208-230/60/3
REMOTE CONDENSERS - Dimensions: W x D x H
***
†
*
**
Shipping Carton: 451/2 x 27 1/2 x 32
Unit: 42 x 24 x 27
Ice Prod.
Lbs./24 hrs.
70° Air 90°
50° Water 70°
Unit: 45 x 22.12 x 29.25
ERC302-32A
Air
—
—
Galv.
110/50
208-230/60/1
(EG) Grey, leathergrain embossed steel with high gloss baked enamel finish.
Use this value to determine minimum wire size as per National Electric Code Standards.
Use value for remote condenser to determine wire size between icemaker and fan motor.
At 0° condenser temperature, 70° air temperature, 55° water temperature.
At 90° condenser temperature, 90° air temperature, 70° water temperature.
F°
C°
50°
10°
70°
21°
90°
32°
AIR TEMPERATURE
AIR TEMPERATURE
TYPICAL ICE MAKING CAPACITY PER 24 HOURS
FME2400AE AIR-COOLED
FME2400WE WATER-COOLED
WATER TEMPERATURE
WATER TEMPERATURE
70° 2455 2105 1790 lbs.
21° 1114 955 812 kg.
90° 2040 1800 1590 lbs.
32° 925 816 721 kg.
100° 1980 1675 1540 lbs.
38° 898 760 699 kg.
F°
C°
50°
10°
70°
21°
90°
32°
70° 2390 2135 1815 lbs.
21° 1084 968 823 kg.
90° 2325 2020 1775 lbs.
32° 1055 916 805 kg.
100° 2245 1930 1715 lbs.
38° 1018 875 778 kg.
Capacities represent typical production, variances of ±5% are normal.
No. of
Wires
Min.
Circuit
Ampacity†
Max. Fuse
Size or
HACR Circuit
Breaker
2
3
2
3
2
3
20.6
14.9
19.5
13.8
23.1
17.4
25
20
25
20
30
25
Power
KWH/100 lbs.
90°/70° 70°F/50°F
Water Usage
Gallons/100 lbs.
Potable
Condenser
90°/70° 70°F/50°F 90°/70° 70°F/50°F
3.26
3.00
2.45
2.19
3.40
3.20
2.40
2.10
1.96
1.75
2.51
2.24
12
12
12
12
12
12
12
12
12
12
12
12
—
—
66
66
—
—
—
—
—
—
—
—
—
—
34
34
—
—
Shipping Carton: 46.88 x 21.75 x 22.50
2
2.6†
15
use with
OPTIONAL PRE-CHARGED REFRIGERANT TUBE KITS:
RTE25: 25 foot pre-charged tubing with connectors — R-404A (HP62).
RTE40: 40 foot pre-charged tubing with connectors — R-404A (HP62).
OPTIONAL STORAGE BINS: BH800, BH900 with KBT14A bin top, and
B90 and extension with KBT18 bin top.
OPTIONAL STAINLESS STEEL PANEL KIT: SPKFM42: Contains top,
front, two end and service panels. Not factory installed.
IMPORTANT OPERATING REQUIREMENTS:
Machine requires voltage indicated on rating name plate. Failures caused
by improper voltage are not considered factory defects.
Scotsman’s products are not designed for outdoor installations nor for
installation where air temperatures fall below 50° F, or exceed 100° F; nor
where water temperatures fall below 40° F, or exceed 100° F. Extended
periods of operation at temperatures exceeding these limitations constitutes misuse under the terms of Scotsman Manufacturer’s Limited
Warranty, resulting in a loss of warranty coverage.
FME2400R REMOTE COOLED
AMBIENT TEMPERATURE
ICE
COND. AIR
INDOOR
WATER
PRODUCTION
LOW
F°
TEMPERATURE C°
0
–17.8
70
21.1
55
12.8
1960 LBS.
890 KG.
NORMAL
F°
TEMPERATURE C°
90
32.2
90
32.2
70
21.1
1780 LBS.
808 KG.
HIGH
F°
TEMPERATURE C°
110
49.3
90
32.2
80
26.7
1500 LBS.
681 KG.
Ice Systems The World Relies On.™
FME SERIES FLAKE ICEMAKER
Model ___________________________flake icemaker manufactured by
Scotsman Ice Systems. Production capacity to be _____________ at 90°F
air temperature and 70°F water temperature. Icemaker to have a ________
(air, water, remote air)-cooled condenser. To have factory installed photoelectric eye bin level control to automatically start and stop icemaker.
Evaporator and auger to be constructed of stainless steel. Exterior cabinet
to be _____________________________ (baked enamel grey leathergrain
or 304 series stainless steel) finish. Icemaker to be UL, CUL, NSF, and
USDA listed.
We reserve the right to make product improvements at any time. Specifications and design
are subject to change without notice. Scotsman ice systems include a full line of ice
shapes, modular and self-storing cubers, flakers, drink dispensers, bins and accessories.
775 CORPORATE WOODS PARKWAY • VERNON HILLS, IL 60061 • (847) 215-4550
FAX (847) 913-9844
E-mail: [email protected]
S-170
Printed in U.S.A.
3.5M 9-97
1-FME2400R