PRODUCT GUIDE - Wooden Camera

ZIP BOX
Zip Box 4x5.65 holds one 4x5.65” Panavision size filter (100x144mm) and clamps to the front of lenses within three exterior
diameter ranges. 80 to 85mm is great for the wide angle DSLR lenses, ARRI Standard and Super Speeds, and other small
cinema lenses, 90 to 95mm for the ARRI Ultra Primes and Leica Summilux-C, and 110-115mm for the Zeiss CP.2s, Angenieux
Optimo Zooms, ARRI Master Primes, Focus Optics Ruby, Cooke Panchro/i 18mm, RED Pro Primes, and many more!
Zip Box is extremely lightweight
and weighs about the same as
the filter it holds which makes it
perfect for gimbal and drone use.
The lens shade design allows
for even the widest lenses and
sensor sizes to be covered
without vignetting.
Stainless steel components
and unibody rubber design
are very durable and
stand up to the toughest
conditions.
ZIP BOX 4x5.65 (80-85mm)
ZIP BOX 4x5.65 (90-95mm)
ZIP BOX 4x5.65 (110-115mm)
SKU: 231600 PRICE: $99
SKU: 231700 PRICE: $99
SKU: 231800 PRICE: $99
ZIP BOX ADAPTER RINGS
With the Zip Box Adapter Rings, almost
every small DSLR lens can be adapted
like the Sony E and MFT mount lenses.
SKU: 231900
ZIP BOX 4x4 (80-85mm)
ZIP BOX 4x4 (90-95mm)
SKU: 231400 PRICE: $99
SKU: 231500 PRICE: $99
1
PRICE: $29
ADAPTER RING SIZES:
49mm
62mm
52mm
67mm
WOODENCAMERA.COM
55mm
72mm
58mm
77mm
ULTRA ARM
ULTRA ARM COMPONENTS
Attaches and holds LCDs and other accessories using standard 25mm ball mounts. Tool-less design lets you quickly attach to
1/4-20 or 3/8-16 threaded holes. Super Clamp version available for attaching to rods, C-stands, or even holding microphones on
the end of an arm. Hot Shoe attachment is great for DSLRs and NATO Clamp version works with all existing NATO accessory rails!
ULTRA ARM BALL (3/8-16)
ULTRA ARM BALL
(SUPER CLAMP)
SKU: 232400 PRICE: $39
ULTRA ARM BALL (HOT SHOE)
SKU: 233100 PRICE: $85
ULTRA ARM BALL (1/4-20)
SKU: 233000 PRICE: $45
ULTRA ARM BALL (NATO CLAMP)
SKU: 232300 PRICE: $39
SKU: 232900 PRICE: $55
ULTRA ARM DOUBLE BALL (3”)
ULTRA ARM DOUBLE BALL (5”)
SKU: 232600 PRICE: $35
SKU: 232700 PRICE: $45
ULTRA ARM DOUBLE BALL (8”)
SKU: 232800 PRICE: $55
ULTRA ARM MONITOR MOUNTS
Available in three sizes and are named after the center
extension length. 1/4-20 versions are shown but 3/8-16
versions are also available. A fourth version called the Mini
Monitor Mount is available with no extension and functions as
an easy way to position a monitor close to the camera.
ULTRA ARM MINI
MONITOR MOUNT
(1/4-20 TO 1/4-20)
SKU: 233200 PRICE: $95
ULTRA ARM MONITOR MOUNT
(1/4-20 TO 1/4-20, 8”)
ULTRA ARM
MONITOR MOUNT
(1/4-20 TO 1/4-20, 5”)
SKU: 232200 PRICE: $185
SKU: 232100 PRICE: $175
ULTRA ARM
MONITOR MOUNT
(1/4-20 TO 1/4-20, 3”)
SKU: 232000 PRICE: $165
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
2
U N I F I E D B A S E P L AT E / B R I D G E P L AT E
VERTICAL 15mm ROD CLAMP
SLOTTED DESIGN FOR 1/4-20
& 3/8-16 CAMERA SCREWS
For optional lens support, reverse dovetail position.
TOP DOVETAILS AVAILABLE
FOR EVERY CAMERA TYPE
ARCA SWISS STANDARD
DOVETAIL SHAPE
PASS THROUGH
15mm RODS
DUAL 15mm ROD CLAMPS
ARRI STANDARD DOVETAIL SLOT
QUICK RELEASE DOVETAIL
UNIFIED BRIDGEPLATE (19mm)
For attaching to tripod or ARRI
standard bridgeplates.
SKU: 223100 PRICE: $499
SLOTTED DESIGN
For attaching to non-standard
screw spacing.
ADJUSTABLE CENTER PLATFORM
Set bridgeplate to correct ARRI or RED lens height.
2060 DOVETAIL (12”)
SKU: 143600 PRICE: $399
3
WOODENCAMERA.COM
UNIFIED VCT SYSTEM
UNIFIED
BASEPLATE
(SONY FS7)
UNIFIED VCT
WEDGE PLATE
ALL UNIFIED
BASEPLATES
ARE COMPATIBLE
ADJUSTABLE
COUNTERBALANCE
VIA DOVETAIL
SKU: 222100 PRICE: $499
SAFETY
STOPPER
SKU: 223300 PRICE: $495
SPRING LOADED
FOOT
VCT-14
STANDARD
RECEIVER
ARRI STANDARD
ROSETTES AND
ACCESSORY MOUNTS
UNIFIED VCT-14
TRIPOD PLATE
ALL METAL
CONSTRUCTION
SKU: 223400 PRICE: $295
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
4
SHOULDER RIGS
SHOULDER RIG V2 (PREMIUM, BROWN LEATHER)
SKU: 204000
PRICE: $1,495
ARRI STANDARD DOVETAIL
ADJUSTABLE SHOULDER PAD
With stop screw on one end and safety
catch on the other to prevent accidental
camera removal.
Unlock thumbscrew and adjust shoulder
pad on Arca Swiss dovetail.
1/4-20 & 3/8-16 THREADED HOLES
For tripod and accessory attachment.
ARCA SWISS STYLE DOVETAIL
Attach to any Arca Swiss standard clamp.
ADJUSTABLE CROSSBAR
Unlock to move left or right.
NATO STANDARD ACCESSORY RAIL
Great for attaching NATO Lock and NATO Lock
Magic Arm. 1/4-20 & 3/8-16 threaded holes and
for accessory attachment. Slotted 1/4” center area
for attaching to other devices.
ROSETTE EXTENSIONS
ARRI STYLE ROSETTES
Moves grips a comfortable distance
away from the camera center.
With M6 adjustable thumbscrews
for handle positioning.
ERGONOMIC LEATHER GRIP
Also available in black leather,
rubber, and wood.
ADDITIONAL OPTIONS
CRUISER
(RUBBER)
SKU: 161800
5
SHOULDER RIG V2
(BASE, BLACK LEATHER)
PRICE $795
SKU: 203300
PRICE $995
SHOULDER RIG V2
(MID, WOODEN GRIP)
SKU: 223700
WOODENCAMERA.COM
PRICE $1,250
WOODEN HANDGRIPS
WOODEN CAMERA HANDGRIPS (RIGHT & LEFT)
These ergonomic wooden handgrips are carved from a solid piece of Sapele wood which is similar
to Mahogany. Attaches by ARRI standard rosette and M6 threaded thumbscrew.
HANDGRIP (LEFT)
SKU: 219400
HANDGRIP (RIGHT)
PRICE: $195
SKU: 219300
PRICE: $195
WOODEN CAMERA HANDGRIP TRIGGER BOX
The control box attaches to the Wooden Handgrips to add start/stop functionality for LANC and ARRI
3 pin Fischer compatible cameras. The same control box works with both the Left and the Right grip.
Coiled LANC and Fischer cables are included. No power is required.
SKU: 219500
PRICE: $195
INCLUDED CABLES:
COILED 3 PIN
FISCHER CABLE (20”)
COILED LANC
CABLE (12”)
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
6
U N I V E R S A L M AT T E B O X
Every Universal Mattebox comes standard with two rotating 4x5.65 filter stages (with an optional third stage available),
individual tray catchers, folding French flag, 143mm diameter opening, and NATO standard accessory rails on left, right,
and top for attaching accessories. The UMB-1 is designed to be user upgradeable and quick to transition from clamp on to
swing away to ultralight when using a stabilizer. A Pro version is available for $1,995 (SKU: 202100), which includes the
Swing Away kit, plus all clamp sizes, bottom and side flags.
UNIVERSAL MATTEBOX (SWING AWAY)
ARRI style rubber bellows with integrated 138mm round filter holder. Native 114mm bellows
opening with snap in reduction rings in 110, 104, 95, 87, and 80mm diameters. Universal
cloth donut included for non-standard lens diameters. Swing away bracket allows mattebox
to be unlocked, rolled forward, and opened 90º. Attaches natively to 15mm LW rods and is
adaptable to studio rods.
SKU: 202000
PRICE: $1,495
INSERT SIZES:
80mm
87mm
95mm
104mm
110mm
CLOTH DONUT INCLUDED
UNIVERSAL MATTEBOX
(15mm STUDIO ADAPTER)
Attaches to bottom of UMB-1 Base and Swing Away
models to clamp to 15mm studio spaced rods. Also
compatible with ARRI MB-20 and similar models.
SKU: 202700
PRICE: $175
UNIVERSAL MATTEBOX
(19mm ADAPTER)
Attaches to bottom of UMB-1 Base and Swing
Away models to clamp to 19mm studio rods. Also
compatible with ARRI MB-20 and similar models.
SKU: 202600
PRICE: $175
7 W O O D E N C A M E R A . C O M / U N I V E R S A L - M AT T E B O X
U N I V E R S A L M AT T E B O X
UNIVERSAL MATTEBOX (CLAMP ON)
Clamp on version attaches natively to 143mm diameter lens fronts and
includes adapters for 136, 134, 125, 114, 110, 104, 95, 87, and
80mm lens diameters. Can be converted to single stage with no sun
shade for an ultralight, stabilizer configuration.
SKU: 201900
PRICE: $1,250
CLAMP SIZES:
80mm
87mm
95mm
104mm
110mm
114mm
125mm
134mm
136mm
UNIVERSAL MATTEBOX (BASE)
The most cost effective mattebox kit. Includes a height adjustable
15mm LW rod bracket which can be adapted to studio rods and a
universal cloth donut with easy to grab finger loops. Upgradeable
to Swing Away or Clamp On versions when needed.
SKU: 201800
PRICE: $995
UMB-1 HARD MATTE SET
Snaps into any version of the UMB-1 to mask
off lighting. Includes 5 sizes for various focal
lengths, and one solid matte to prevent dust
from entering lens area between takes.
SKU: 213600
UNIVERSAL MATTEBOX
(SIDE FLAGS, LEFT & RIGHT)
Adjustable side flags compatible with any
model of Universal Mattebox.
SKU: 202200
PRICE: $150
PRICE: $195
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
8
C-BOX (CONVERTER)
C-Box (Converter) allows for HDMI or HD-SDI signal input and simultaneous
output of three HD-SDI and two HDMI. Additionally, 5V mini USB port
provides power to wireless HDMI “stick” transmitters like Paralinx, IDX
Cam-Wave, etc. Three versions available.
C-BOX (CONVERTER, D-TAP)
Shown below. Attaches between existing power plate and
mount system (Quick Back, Battery Slide, etc.)
SKU: 176200
PRICE: $599
C-BOX (CONVERTER, V-MOUNT)
Male V-Mount on one side, female V-Mount on the other.
Attaches between V-Mount battery and
V-Mount plate on camera.
SKU: 176300
PRICE: $699
C-BOX (CONVERTER, GOLD MOUNT)
Male Gold Mount on one side, female Gold Mount on
the other. Attaches between Gold Mount battery and
Gold Mount plate on camera.
SKU: 176400
5V USB
OUTPUT
PRICE: $699
TWO SIMULTANEOUS
HDMI OUTPUTS
For wireless
transmitters etc.
Great for wireless transmitters like
PARALINX, IDX Cam-Wave, etc.
12-24V INPUT
MINI 4 PIN XLR
THREE SIMULTANEOUS
3G HD-SDI OUTPUTS
CHOOSE HDMI OR
HD-SDI INPUT
V-MOUNT & GOLD MOUNT
THREADED HOLE PATTERNS
9
WOODENCAMERA.COM
D-BOX (POWER DISTRO)
D-BOX (2 PIN LEMO KIT, D-TAP)
One of the most popular combinations of connectors including (2)
2 Pin LEMO, (2) D-Tap, (1) USB, and a 4 Pin Mini XLR Input. An
included pigtail cable loops around from the user’s power plate
D-Tap (not included) and plugs into power input.
SKU: 200000
D-Box (Power Distribution) allows for user selectable power outputs
including 2 pin LEMO, 4 pin LEMO, 4 pin Hirose, 3 pin Fischer, D-Tap,
and USB. Allows for up to 6 simultaneous outputs with a maximum draw
of 10A limited by an easily accessible fuse. Left side panel opens to
service fuse and to disconnect and remove connector panels.
PRICE: $449
D-TAP
D-BOX (2 PIN LEMO KIT, V-MOUNT)
Similar to the D-Tap version above but with a male V-Mount on
one side and female V-Mount on the other. Power is passed
internally to breakout connectors and also passed through to
camera. Data information is passed when present. (1) D-Tap
integrated on the male power plate, (2) 2 Pin LEMO, (2) D-Tap,
(1) USB, and (1) Blank.
SKU: 200100
12v unregulated power.
USB
5v regulated power.
PRICE: $549
D-BOX (2 PIN LEMO KIT, GOLD MOUNT)
Male Gold Mount on one side and female Gold Mount on the other.
Power is passed internally to breakout connectors and also passed
through to camera. (1) D-Tap integrated on the male power plate, (2) 2
Pin LEMO, (2) D-Tap, (1) USB, and (1) Blank.
SKU: 200200
4 PIN MINI XLR INPUT
Accepts 12-14.8v input.
Reverse polarity protection.
PRICE: $549
D-BOX (PROJECT BOX)
4 PIN HIROSE
Have an idea for something that could fit between
a power plate and your camera? This kit comes
with (6) Blank panels and (1) Blank left side panel.
12v unregulated.
SKU: 201200
PRICE: $275
2 PIN LEMO
12v unregulated.
ARRI standard wiring.
3 PIN FISCHER
24v regulated power, up to 2A.
BLANK PLATES
ALSO AVAILABLE
REMOVABLE PANEL
Service fuse and install or
remove connectors.
4 PIN LEMO
12v unregulated.
RED standard wiring.
Connect and
disconnect easily.
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
10
DIRECTOR’S MONITOR CAGE
Director’s Monitor Cage allows attachment of any LCD display by top, bottom, or side
mounted 1/4-20 screws. Top and bottom of cage raise and lower to fit LCD properly.
SKU: 182600
PRICE: $299
ADJUSTABLE HEIGHT CAGE
Fits LCDs 5-7” and some larger.
BATTERY MOUNTING BRACKET
For attachment of V-Mount or Gold Mount plates,
wireless receivers, or additional accessories.
FOAM GRIPS
For comfortable
holding.
OFFSET BRACKETS
For attaching LCDs with HD-SDI or
HDMI connections on bottom.
C-STAND
COMPATIBLE
Attaches to C-Stand or
any standard 5/8” pin.
11
WOODENCAMERA.COM
ARRI
ALEXA MINI
ARRI ALEXA MINI UNIFIED ACCESSORY KIT (PRO, 19mm)
SKU: 227300
UVF MOUNT
(ALEXA MINI, NO CLAMP)
NATO HANDLE KIT (PLUS, 100mm)
Attaches directly to NATO Handle
(Plus) or any other device with
integrated 15mm clamp. Accepts
ARRI MVF-1 and has three points of
adjustment. Tool-less design allows
quick installation and removal.
Quick release, multi-function top handle attaches and
detaches without tools. Ratcheting, 360º rotating
grip with integrated shoe mount. Safety NATO Rail
(100mm) included in kit.
SKU: 175800
PRICE: $2,940
PRICE: $250
SKU: 207400
UNIFIED CAGE
(ALEXA MINI + LW)
PRICE: $379
BATTERY SLIDE
Cage attaches by four screws on top
and four screws on the bottom making
it extremely secure. Side pieces feature
NATO rails and two quick release NATO
Rosettes that are ARRI standard. 15mm
LW baseplate on bottom attaches to any
tripod plate or ARRI standard bridgeplate.
Adjustable mounting system
for V-Mount, QRC style Gold
Mount, and RED/Blueshape
battery plates.
SKU: 156600
PRICE: $199
SKU: 226900 PRICE: $995
2x 19mm ROD (15”)
19mm diameter iris rods for
mounting accessories.
SKU: 143300
PRICE: $60 ea.
ROD CLAMP
(19mm)
UNIFIED BRIDGEPLATE (19mm)
SKU: 150400
PRICE: $99
ARRI style bridge plate with 19mm studio
spacing for holding the two 19mm Rods
(15”) at the correct lens height and
attaches easily to an ARRI standard dovetail.
2060 DOVETAIL (12”)
12” ARRI standard dovetail with
safety catches on each end.
SKU: 143600
Provides 1/4-20 and
3/8-16 mounting points for
attaching accessories like
Battery Slide to rods.
SKU: 223100
PRICE: $399
PRICE: $499
ADDITIONAL OPTIONS
V-MOUNT
(ALEXA MINI)
SKU: 207500
PRICE $320
D-BOX
(ALEXA MINI, V-MOUNT)
SKU: 209200
PRICE $1,195
WC GOLD MOUNT
(ALEXA MINI)
SKU: 207600
PRICE $320
D-BOX
(ALEXA MINI, GOLD MOUNT)
SKU: 209100
PRICE $1,195
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
12
BLACKMAGIC
URSA MINI
WIRELESS SIDE
PLATE ADAPTER
(URSA MINI)
Attaches over the right rear side panel to
provide mounting points for the Universal
Wireless Side Plate which can be added
for wireless receiver boxes, wireless
transmitters, etc.
SKU: 229700
PRICE: $49
ROSETTE SIDE PLATE
(URSA MINI)
Attaches to the right side of the Blackmagic
URSA Mini Camera by the ARRI rosette
to add additional 1/4-20 and 3/8-16
mounting points. An ARRI standard rosette
is available for attaching the handgrip or
extension arm. ARRI accessory mount also
available in several places (3/8-16 screw
hole with locating pins adjacent).
SKU: 229600
PRICE: $150
BLACKMAGIC URSA MINI UNIFIED ACCESSORY KIT (PRO)
SKU: 226500
PRICE: $1,803
NATO HANDLE KIT (PLUS, 70mm)
SKU: 175700 PRICE: $250
UVF MOUNT (NO CLAMP)
SKU: 179900
PRICE: $379
TOP PLATE (URSA MINI)
SKU: 216000
PRICE: $295
SAFETY DOVETAIL (12”)
2x 15mm ROD (15”)
SKU: 151200
PRICE: $260
SKU: 142600 PRICE: $60 ea.
UNIFIED BASEPLATE (URSA MINI)
SKU: 222200
13
PRICE: $499
WOODENCAMERA.COM/BLACKMAGIC
URSA/BMSC/BMCC/BMPCC
BMC URSA ACCESSORY KIT (PRO, 19mm)
SKU: 195100
BMSC ACCESSORY KIT (PRO)
PRICE: $2,117
SKU: 184700
ACCESSORY KIT (ADVANCED)
ACCESSORY KIT (ADVANCED)
SKU: 194900
PRICE $859
ACCESSORY KIT (BASE)
SKU: 194800
PRICE $330
BMCC ACCESSORY KIT (PRO)
SKU: 184400
PRICE: $2,374
ACCESSORY KIT (ADVANCED)
SKU: 184300
PRICE $1,485
ACCESSORY KIT (BASE)
SKU: 184200
PRICE $749
SKU: 184600
PRICE: $1,492
PRICE $818
ACCESSORY KIT (BASE)
SKU: 184500
PRICE $699
BMCC ACCESSORY KIT (PRO)
SKU: 217800
PRICE: $2,371
ACCESSORY KIT (ADVANCED)
SKU: 217700
PRICE $1,264
ACCESSORY KIT (BASE)
SKU: 217600
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
PRICE $834
14
CANON
C300mkII
CANON C300mkII UNIFIED ACCESSORY KIT (PRO)
SKU: 226200 PRICE: $2,071
NATO HANDLE KIT (CHEESE, 70mm)
UVF MOUNT (V2)
Quick release, multi-function top handle attaches
and detaches without tools. Arrays of 1/4-20 and
3/8-16 holes provides mounting points for additional
accessories. Safety NATO Rail (70mm) included in kit.
SKU: 166300
Attaches to included 15mm tube
clamp or any other device with
integrated 15mm clamp. Accepts
most EVFs and LCDs with three
points of adjustment. Tool-less
design allows quick installation
and removal.
PRICE: $250
SKU: 157100 PRICE: $449
TOP PLATE (C300mkII)
Top mounting cheeseplate for the Canon
C300mkII camera. Arrays of 1/4-20
and 3/8-16 holes in standard
spacing for accessory mounting.
BATTERY SLIDE
SKU: 216100 PRICE: $195
Adjustable mounting system for
V-Mount, QRC style Gold Mount,
and RED/Blueshape battery plates.
SKU: 156600
PRICE: $199
ROD CLAMP
(15mm LW)
Provides 1/4-20 mounting
points for attaching accessories
like Battery Slide to rods.
SKU: 150200
PRICE: $99
SAFETY DOVETAIL (12”)
2x 15mm
ROD (15”)
ARRI standard dovetail with stop
screw on one end and safety latch
on the other to prevent accidental
camera removal.
UNIFIED BASEPLATE
(CANON C300mkII)
15mm diameter iris rods for
mounting accessories.
SKU: 151200
Quick release baseplate that
provides lightweight 15mm rod
support at the correct lens height.
SKU: 142600 PRICE: $60 ea.
SKU: 222100
PRICE: $260
PRICE: $499
ADDITIONAL OPTIONS
V-MOUNT
(C300mkII)
SKU: 214700
15
PRICE $225
D-BOX
(C300mkII, V-MOUNT)
WC GOLD MOUNT
(C300mkII)
SKU: 215800
SKU: 214800
PRICE $1,150
PRICE $225
D-BOX
(GOLD MOUNT, C300mkII
SKU: 215700
PRICE $1,150
WOODENCAMERA.COM/CANON
C100
C100 UNIFIED ACCESSORY KIT (PRO)
SKU: 225000 PRICE: $1,966
UNIFIED ACCESSORY KIT (ADVANCED)
SKU: 224900 PRICE $1,189
UNIFIED ACCESSORY KIT (BASE)
SKU: 224800
PRICE $804
CANON 5DmkIII ACCESSORY KIT (PRO)
SKU: 188600
DSLR
SONY A7rII/A7sII ACCESSORY KIT (PRO)
SKU: 215200
PRICE: $2,225
ACCESSORY KIT (ADVANCED)
SKU: 215100
PRICE $1,118
ACCESSORY KIT (BASE)
SKU: 215000
PRICE $789
CANON 1DC ACCESSORY KIT (PRO)
PRICE: $2,225
SKU: 188300
ACCESSORY KIT (ADVANCED)
ACCESSORY KIT (ADVANCED)
SKU: 188500
PRICE $1,118
ACCESSORY KIT (BASE)
SKU: 188400
PRICE $789
SKU: 188200
PRICE: $2,398
PRICE $1,509
ACCESSORY KIT (BASE)
SKU: 188100
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
PRICE $723
16
PA N A S O N I C
VA R I C A M L T
PANASONIC VARICAM LT UNIFIED ACCESSORY KIT (PRO)
SKU: 224100
PRICE: $1,807
UVF MOUNT
(VARICAM 35, NO CLAMP)
The popular UVF Mount v2 in custom configuration
for devices like NATO Handle (Plus) with integrated
15mm clamp. Accepts Panasonic VariCam 35
EVF (AU-VCVF1G OLED CVF) viewfinder with three
points of adjustment. Tool-less design allows quick
installation and removal.
NATO HANDLE KIT (PLUS, 100mm)
Quick release, multi-function top handle attaches and
detaches without tools. Ratcheting, 360º rotating
grip with integrated shoe mount. Safety NATO Rail
(100mm) included in kit.
SKU: 175800
SKU: 197500
PRICE: $379
PRICE: $250
TOP PLATE (VARICAM LT)
Top cheeseplate for the Varicam LT.
Arrays of 1/4-20 & 3/8-16 holes in
standard spacing and ARRI standard
accessory mount in several places.
SKU: 223500 PRICE: $299
2x 15mm ROD (15”)
15mm diameter iris rods for
mounting accessories.
SKU: 142600 PRICE: $60 ea.
SAFETY DOVETAIL (12”)
UNIFIED BASEPLATE
(VARICAM LT)
Quick release baseplate that
provides lightweight 15mm rod
support at the correct lens height.
SKU: 222400
ARRI standard dovetail with stop
screw on one end and safety
latch on the other to prevent
accidental camera removal.
SKU: 151200
PRICE: $260
PRICE: $499
ADDITIONAL OPTIONS
UNIVERSAL LENS SUPPORT (15mm LW)
SKU: 175400
17
PRICE $295
UNIVERSAL LENS SUPPORT (19mm/15mm STUDIO
SKU: 175500
PRICE $295
W O O D E N C A M E R A . C O M / PA N A S O N I C
VA R I C A M 3 5
AJA CION
PANASONIC VARICAM 35 UNIFIED ACCESSORY KIT (PRO)
SKU: 225900
NATO HANDLE KIT
(PLUS, 100mm)
SKU: 175800
SKU: 197500
PRICE: $250
SKU: 196300
PRICE: $249
PRICE: $249
SAFETY DOVETAIL (12”)
2x 15mm ROD (15”)
SKU: 142600
PRICE: $379
TOP PLATE
(VARICAM 35, BACK)
TOP PLATE
(VARICAM 35, FRONT)
SKU: 196200
PRICE: $2,006
UVF MOUNT
(VARICAM 35, NO CLAMP)
SKU: 151200
PRICE: $60 ea.
PRICE: $260
UNIFIED BASEPLATE
(VARICAM 35)
SKU: 222400
NATO HANDLE KIT (PLUS, 100mm)
SKU: 175800
PRICE: $499
AJA CION ACCESSORY KIT (PRO, V-MOUNT)
SKU: 195400 PRICE: $2,386
PRICE: $250
UVF MOUNT (NO CLAMP)
SKU: 179900
TOP PLATE (CION)
SKU: 183000
PRICE: $379
BATTERY SLIDE
(CION, V-MOUNT)
PRICE: $299
SKU: 193200 PRICE: $399
REAR ROD ADAPTER
(CION, 15mm LW)
FIXED BASE (CION)
SKU: 193400 PRICE: $120
SKU: 183400 PRICE: $349
SAFETY DOVETAIL (12”)
SKU: 151200
2x 15mm ROD (9”)
SKU: 142400
PRICE: $40 ea.
PRICE: $260
DOVETAIL CLAMP
SKU: 156700
PRICE: $250
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
18
SONY
FS5/FS7
SONY FS5 UNIFIED ACCESSORY KIT (PRO)
SKU: 226800
PRICE: $1,631
NATO LOCK MAGIC ARM (11”)
SKU: 198700
TOP PLATE (SONY FS5)
SKU: 215900
BATTERY SLIDE
PRICE: $195
SKU: 156600
2x 15mm ROD (15”)
SKU: 142600
SKU: 151200
PRICE: $260
SKU: 150200
PRICE: $99
UNIFIED BASEPLATE (SONY FS5)
SKU: 222400
SONY FS7 UNIFIED ACCESSORY KIT (PRO)
SKU: 224400
PRICE: $199
ROD CLAMP (15mm LW)
PRICE: $60 ea.
SAFETY DOVETAIL (12”)
PRICE: $259
PRICE: $499
UVF MOUNT (FS7, NO CLAMP)
PRICE: $2,055
SKU: 195800
PRICE: $329
NATO HANDLE KIT (PLUS, 70mm)
SKU: 175700
PRICE: $250
BATTERY SLIDE
TOP PLATE (FS7)
SKU: 193900
SKU: 156600
PRICE: $299
PRICE: $199
ROD CLAMP
(15mm LW)
2x 15mm ROD (15”)
SKU: 142600
SKU: 150200
PRICE: $60 ea.
SAFETY DOVETAIL (12”)
UNIFIED BASEPLATE
(SONY FS7)
SKU: 222100
19
PRICE: $99
SKU: 151200
PRICE: $499
WOODENCAMERA.COM/SONY
PRICE: $260
FS700
F55/F5
SONY FS700 ACCESSORY KIT (PRO)
NATO HANDLE KIT (PLUS, 70mm)
SKU: 175700
SKU: 185600
PRICE: $2,141
PRICE: $250
UVF MOUNT (NO CLAMP)
1/4-20 HOT SHOE
SKU: 142000
SKU: 179900
PRICE: $379
PRICE: $25
TOP PLATE (FS700)
SKU: 160800
BATTERY SLIDE
PRICE: $160
SKU: 156600
PRICE: $199
ROD CLAMP
(15mm LW)
SKU: 150200
QUICK BASE (FS700)
SKU: 162100
SAFETY DOVETAIL (12”)
PRICE: $399
SKU: 151200
2x 15mm ROD (15”)
SKU: 142600
PRICE: $99
PRICE: $260
DOVETAIL CLAMP
PRICE: $60 ea.
SKU: 156700
PRICE: $250
SONY F55 UNIFIED ACCESSORY KIT (PRO)
SKU: 224700
NATO HANDLE KIT (PLUS, 70mm)
SKU: 175700
PRICE: $2,210
UVF MOUNT
(F55/F5, NO CLAMP)
PRICE: $250
SKU: 180000
SONY F55/F5
CABLE PROTECTOR
PRICE: $379
TOP PLATE (F55/F5)
SKU: 163700
PRICE: $299
BATTERY SLIDE
SKU: 182800
.
PRICE: $95
SKU: 156600
ROD CLAMP (15mm LW)
2x 15mm ROD (18”)
SKU: 142700
PRICE: $199
.
SKU: 150200
PRICE: $65 ea.
PRICE: $99
SAFETY DOVETAIL (12”)
SKU: 151200
PRICE: $260
UNIFIED BASEPLATE (SONY F55, F5)
SKU: 222200
PRICE: $499
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
20
RED
UVF MOUNT v2
UVF Mount v2 accepts most
EVFs and LCDs with three points
of adjustment. Tool-less design
allows quick installation and
removal UVF v2 Sled. Safety pin
prevents accidental removal.
PL MOUNT (EPIC/SCARLET)
Simple PL mount that attaches to RED Weapon,
Scarlet-W, Epic, and Scarlet cameras.
RED MALE LEMO TO
FEMALE POGO LCD/
EVF CABLE
(12”, WEAPON)
SKU: 175900 PRICE: $399
SKU: 157100
PRICE: $449
Converts standard 16 pin LEMO
to female pogo interface for the
DSMC2 monitors.
SKU: 221400 PRICE: $205
2x SAFETY NATO ARM
(WEAPON)
NATO standard rail with safety
pins on each end. Spans from
Easy Top (Weapon) to Easy Riser
(Weapon).
WC MAGIC ARM (7”)
SKU: 227700
PRICE:$140 ea.
7” articulating arm with center rosette
and 1/4-20 screws on each end for
accessory attachment.
SKU: 198800
PRICE: $125
UNIFIED BRIDGEPLATE (19mm)
LW 15mm BRACKET (WEAPON)
Combine with Easy Riser for 15mm LW rods
on Weapon/Scarlet Weapon/Raven.
SKU: 213800
PRICE: $140
19mm Bridgeplate with adjustable center
platform for correct ARRI or RED lens height.
Slotted design allows for attaching to nonstandard screw spacing.
SKU: 223100 PRICE: $499
ADDITIONAL OPTIONS
PASS THROUGH TOP PLATE
(WEAPON/SCARLET-W/RAVEN)
SKU: 229400
21
PRICE $350
WIFI SIDE PLATE
(WEAPON/SCARLET-W/RAVEN)
SKU: 228800
PRICE $499
WOODENCAMERA.COM/RED
W E A P O N / S C A R L E T- W / R AV E N
TRIGGER HANDLE (WEAPON)
Attaches directly to camera top or to top plate
and Record button on top. 1/4-20 and
3/8-16 holes for attaching accessories.
SKU: 228000 PRICE: $350
EASY TOP (WEAPON)
Top cheeseplate for RED Weapon,
Scarlet Weapon, and Raven
cameras. 1/4-20 and 3/8-16 holes
in standard spacing for accessory
mounting. Included interfaces convert
the two LCD/EVF pogo pins to the
standard 16pin LEMOs.
CABLE-LESS
V-MOUNT (WEAPON)
SKU: 213900
PRICE: $599
Cable-less V-Mount system for the
RED Weapon, Scarlet Weapon, and
Raven cameras utilizing an IDX brand
plate with two D-Taps and the
Wooden Camera pogo interface
module. Attaches directly to back of
camera without tools.
SKU: 220600 PRICE: $645
RIGHT SIDE PLATE
(WEAPON)
Side mounting cheeseplate for the RED Weapon,
Scarlet Weapon, and Raven cameras. Attaches
directly to side of camera body. Rows of 1/4-20
threaded holes in RED standard spacing, ARRI
style mounting holes, and ARRI standard rosette.
2x 19mm ROD (12”)
SKU: 227800
19mm diameter iris rods for
mounting accessories.
SKU: 143200
PRICE: $150
PRICE: $50 ea.
EASY RISER (WEAPON)
2060 DOVETAIL (12”)
12” ARRI standard dovetail with
safety catches on each end.
Riser shim plate for RED Weapon, Scarlet
Weapon, and Raven cameras. Combine
with Bridgeplate (19mm) or (15mm Studio)
for rod support at correct lens height.
SKU: 213700 PRICE: $160
SKU: 143600 PRICE: $399
ADDITIONAL OPTIONS
TOOL-LESS LCD/EVF ADAPTER
(WEAPON/SCARLET-W/RAVEN)
SKU: 233800
PRICE $140
A-BOX
(WEAPON/SCARLET-W/RAVEN)
SKU: 216200
PRICE $199
Wooden Camera, Inc. has no right or claim to any trademark of and is not affiliated or associated with or endorsed or sponsored by AJA Video
Systems, Inc., ARRI Group, Blackmagic Design Pty, Ltd., Bolex International, SA, Canon Inc., Nikon Corporation, Ikonoskop AB, Panasonic
Corporation, Red.com, Inc., Sony Corporation, or Vision Research Inc. ©Wooden Camera, Inc. 2011-2016.
22
12v D-TAP
12v 2PIN LEMO
24v 3PIN FISCHER
WITH R/S
5v USB OUTPUT
12-16v HOT SWAP
INPUT
D-BOX (WEAPON/SCARLET-W/RAVEN, V-MOUNT)
SKU: 233900 PRICE: $1,295
D-BOX (WEAPON/SCARLET-W/RAVEN, GOLD MOUNT)
SKU: 234000 PRICE: $1,295
D-BOX (WEAPON, POWER DISTRIBUTION PORTION ONLY)
SKU: 235000 PRICE: $699