1
BILL OF QUANTITY FOR THE WORK RENOVATION OF DISPENSARY BUILDING AT
JAYANT PROJECT.
S.No.
1
2
3
4
5
6
Description of item
Demolishing cement concrete manually/ by mechanical
means including disposal of material within 50 metres lead
as per direction of Engineer - in - charge. Nominal
concrete 1:3:6 or richer mix (i/c equivalent design mix).
Dismantling old plaster or skirting raking out joints and
cleaning the surface for plaster including disposal of
rubbish to the dumping ground within 50 metres lead.
Dismantling tile work in floors and roofs laid in cement
mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm.
Dismantling G.I. pipes (external work) including
excavation and refilling trenches after taking out the pipes,
manually/ by mechanical means including stacking of
pipes within 50 metres lead as per direction of Engineerin-charge : 15 mm to 40 mm nominal bore.
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand).
(a)
(anodic coating not less than grade AC 10 as per IS:
1868) transparent or
(b) 250 X 16 mm
Providing and fixing ISI marked oxidised M.S. sliding
door bolts with nuts and screws etc. complete : 300x16
mm.
Providing and fixing aluminium tower bolts ISI marked
anodized (anodic)
250x10mm
(b)
150x10mm
8
(a)
Providing and fixing aluminium handles ISI marked
anodized (anodic coating not less than grade AC 10 as
per IS: 1868) transparent or dyed to.
125mm
(b)
100mm
9
Providing and fixing Ist quality ceramic glazed wall tiles
conforming to IS:15622 (thickness to be specified by the
manufacturer), of approved make, in all colours, shades
except burgundy, bottle green, black of any size as
approved by Engineer-in-Charge, in skirting, risers of
steps and dados, over 12 mm thick bed of cement mortar
1:3 (1 cement : 3 coarse sand) and jointing with grey
cement slurry @ 3.3kg per sqm, including pointing in
white cement mixed with pigment of matching shade
complete.
Providing and laying vitrified floor tiles in different sizes
(thickness to be specified by the manufacturer) with water
absorption less than 0.08% and conforming to IS :
15622, of approved make, in all colours and shades, laid
on 20mm thick cement mortar 1:4 (1 cement : 4 coarse
sand), including grouting the joints with white cement
and matching pigments etc., complete. Size of Tile
600x600 mm.
6
7
10
Qty.
1.00
Cum
Rate/Unit
806.35
Cum
Amount
806.35
225.00
Sqm
18.15/
Sqm
4083.75
880.00
Sqm
25.55/
Sqm
22484.00
50.00
Metre
52.60/
Metre
2630.00
50.00
Sqm
20.00
Nos
133.85/
Sqm
180.45/
Each
6692.50
15.00
Nos
161.55/
Each
2423.25
20.00
Nos
30.0
Nos
90.65/
Each
62.75/
Each
1813.00
20.00
Nos
30.00
Nos
700.00
Sqm
66.95/
Each
52.80/
Each
793.60/
Sqm
1339.00
405.00
Sqm
1402.55/
Sqm
568032.75
3609.00
1882.50
1584.00
555520.00
2
11
12
13
14
15
16
17
18
19
20
21
22
Cement concrete flooring 1:2:4 (1cement :2 coarse
sand:4 graded stone aggregate) finished with a floating
coat of neat cement including cement slurry, but
excluding the cost of nosing of steps etc. complete. 40
mm thick 20mm nominal size stone aggregate.
Providing and fixing ISI marked flush door shutters
conforming to IS : 2202 (Part I) non-decorative type, core of
block board construction with frame of 1st class hard
wood and well matched commercial 3 ply veneering
with vertical grains or cross bands and face veneers on
both faces of shutters : 35 mm thick including ISI marked
Stainless Steel butt hinges with necessary screws.
Providing and fixing aluminium die cast body tubular type
universal hydraulic door closer (having brand logo with ISI,
IS : 3564, embossed on the body, door weight upto 35 kg
and door width upto 700 mm), with necessary accessories
and screws etc. complete.
Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade : Two or
more coats on new work.
Removing dry or oil bound distemper, water proofing
cement paint and the like by scrapping, sand papering and
preparing the surface smooth including necessary repairs
to scratches etc. complete.
Distempering with oil bound washable distemper of
approved brand and manufacture to give an even shade :
New work (two or more coats) over and including water
thinnable priming coat with cement primer.
Distempering with oil bound washable distemper of
approved brand and manufacture to give an even shade :
Old work (one or more coats).
Finishing walls with Acrylic Smooth exterior paint of required
shade Old work (One or more coat applied @ 0.90 ltr/10
sqm).
Painting with synthetic enamel paint of approved
brand and manufacture of required colour to give an even
shade : One or more coats on old work.
Taking out doors, windows and clerestory window shutters
(steel or wood) including stacking within 50 metres lead :
Of area 3 sq. metres and below.
Providing and fixing water closet squatting pan (Indian
type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10
litre low level white P.V.C. flushing cistern, including flush
pipe, with manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and
floors wherever required : White Vitreous china Orissa
pattern W.C. pan of size 580x440 mm with integral type
foot rests.
Providing and fixing white vitreous china pedestal type
water closet (European type W.C. pan) with seat and lid,
10 litre low level white P.V.C. flushing cistern, including flush
pipe, with manually controlled device (handle lever),
conforming to IS : 7231, with all fittings and fixtures
complete, including cutting and making good the walls and
floors wherever required : W.C. pan with ISI marked white
solid plastic seat and lid.
40.00
Sqm
316.8/
Sqm
12672.00
9.5
Sqm
1684.75/
Sqm
16005.13
5.00
Nos
737.35/
Each
3686.75
46.00
Sqm
63.05/
Sqm
2900.30
141.00
Sqm
9.00/
Sqm
1269.00
141.00
Sqm
79.65/
Sqm
11230.65
1273.00
Sqm
28.55/
Sqm
36344.15
1575.65
Sqm
37.45/
Sqm
59008.09
785.43
Sqm
41.35/
Sqm
32477.53
10.00
Nos
49.6/
Each
496.00
7.00
Nos
3265.25/
Each
22856.75
2.00
Nos
3189.75/
Each
6379.50
3
23
24
25
(a)
(b)
(c)
26
27
28
29
30
31
32
33
Providing and fixing white vitreous china pedestal type
water closet (European type) with seat and lid, 10 litre
low level white vitreous china flushing cistern & C.P.
flush bend with fittings & C.I.brackets, 40 mm flush
bend, overflow arrangement with specials of standard
make and mosquito proof coupling of approved
municipal design complete, including painting of
fittings and brackets, cutting and making good the
walls and floors wherever required : W.C. pan with ISI
marked white solid plastic seat and lid.
Providing and fixing one piece construction white
vitreous china squatting plate with an integral longitudinal
flushing pipe, white P.V.C. automatic flushing cistern, with
fittings, standard size G.I. / PVC flush pipe for back and
front flush with standard spreader pipes with fittings, G.I
clamps and C.P. brass coupling complete, including
painting of fittings and cutting and making good the walls
and floors etc. wherever required : Range of two squatting
plates with 5 litre P.V.C. automatic flushing cistern.
Providing and fixing wash basin with C.I. brackets, 15 mm
C.P. brass pillar taps, 32 mm C.P. brass waste of standard
pattern, including painting of fittings and brackets, cutting
and making good the walls wherever require
: White Vitreous China Wash basin size 630x450 mm with a
single 15 mm C.P. brass pillar tap.
White Vitreous China Flat back wash basin size 550x
400 mm with single 15 mm C.P. brass pillar tap.
White Vitreous China Flat back wash basin size 450x
300 mm with single 15 mm C.P. brass pillar tap.
Providing and fixing kitchen sink with C.I. brackets, C.P.
brass chain with rubber plug, 40 mm C.P. brass waste
complete, including painting the fittings and brackets, cutting
and making good the walls wherever required : White
glazed fire clay kitchen sink of size 600x450x
250 mm.
Providing and fixing white vitreous china pedestal for
wash basin completely recessed at the back for the
reception of pipes and fittings.
Providing and fixing 600x450 mm beveled edge mirror of
superior glass (of approved quality) complete with 6 mm
thick hard board ground fixed to wooden cleats with C.P.
brass screws and washers complete.
Providing and fixing 600x120x5 mm glass shelf with edges
round off, supported on anodised aluminium angle frame
with C.P. brass brackets and guard rail complete fixed with
40 mm long screws, rawl plugs etc., complete.
Providing and fixing toilet paper holder : C.P. brass.
Providing and fixing trap of self cleansing design with
screwed down or hinged grating with or without vent arm
complete, including cost of cutting and making good the
walls and floors : 100mm inlet and 75mm outlet Sand
Cast Iron S&S as per IS- 1729.
Providing and fixing PTMT liquid soap container 109
mm wide, 125 mm high and 112 mm distance from wall of
standard shape with and colour, weighing not less than
105 gms.
Providing and fixing PTMT towel ring trapezoidal shape 215
mm long, 200 mm wide with minimum distances of 37 mm
from wall face with concealed fittings arrangement of
approved quality and colour, weighing not less than 88
gms.
1.00
Nos
4636.25/
Each
4636.25
1.00
Nos
5860.20/
Each
5860.20
3.00
Nos
7.00
Nos
1903.25/
Each
1699.95/
Each
5709.75
2.00
Nos
1554.8/
Each
3109.60
2.00
Nos
2388.45/
Each
4776.90
10.00
Nos
972.45/
Each
9724.50
10.00
Nos
762.55/
Each
7625.50
10.00
Nos
522.2/
Each
5222.00
3.00
Nos
5.00
Nos
339.85/
Each
686.00/.
Each
1019.55
10.00
Nos
181.75/
Each
1817.50
3.00
Nos
174.80/
Each
524.40
11899.65
3430.00
4
34
(a)
Providing and fixing PTMT towel rail complete with brackets
fixed to wooden cleats with CP brass screws with
concealed fittings arrangement of approved quality and
colour. 600 mm long towel rail with total length of 645 mm,
width 78 mm and effective height of 88 mm, weighing not
less than 190 gms.
Chequerred precast cement concrete tiles 22 mm thick in
foot path on 20 mm thick bed of cement mortar (1:4).
Medium shade using 50% white cement 50% Grey cement
Providing and fixing brass bib cock of approved quality : 15
mm nominal bore.
Providing and fixing brass stop cock of approved quality :
15 mm nominal bore.
Providing and fixing gun metal gate valve with C.I. wheel of
approved quality (screwed end) : 25 mm nominal bore.
Providing and fixing G.I. pipes complete with G.I. fittings
and clamps, i/c cutting and making good the walls etc.
internal work- Exposed on wall.
15 mm dia nominal bore
(b)
20mm dia nominal bore
40
(a)
Providing and fixing G.I. pipes complete with G.I. fittings
including trenching and refilling etc. etc. : External work
15 mm dia nominal bore
(b)
25 mm dia nominal bore
41
Renewing glass panes, with putty and nails wherever
necessary including racking out the old putty: Float glass
panes of thickness 4 mm.
Providing and fixing wire gauge shutters using galvanized
M.S. wire gauge of average width of aperture 1.4 mm in
both directions with wire of dia 0.63 mm, for doors, windows
and clerestory windows with hinges and necessary screws :
30 mm thick shutters
with ISI marked M.S. pressed butt hinges bright finished of
required size Kiln seasoned and chemically treated
hollock wood.
Providing and fixing glazed shutters for doors, windows
and clerestory windows using 4 mm thick float glass panes,
including ISI marked M.S. pressed butt hinges bright
finished of required size with necessary screws. 30 mm
thick.
Providing wood work in frames of doors, windows,
clerestory windows and other frames, wrought framed and
fixed in position with hold fast lugs or with dash fasteners
of required dia & length (hold fast lugs or dash fastener
shall be paid for separately). Kiln seasoned and chemically
treated hollock wood.
35
36
37
38
39
42
43
44
10.00
Nos
448.40/
Each
4484.00
20.00
Sqm
852.95/
Sqm
17059.00
25.00
Nos
10.00
Nos
5.00
Nos
259.85/
Each
259.85/
Each
427.80/
Each
6496.25
30.00
Metre
20.00
Metre
181.35/
Metre
221.50/
Metre
5440.50
10.00
Metre
60.00
Metre
6.00
Sqm
156.60/
Metre
238.95/
Metre
651.40/
Sqm
1566.00
9.5
Sqm
1761.05/
Sqm
16729.98
1.22
Sqm
1873.95/
Sqm
2286.22
0.26
Cum
50810.85/
Cum
13210.82
2598.50
2139.00
4430.00
14337.00
3908.40
5
45
46
47
Providing 40x5 mm flat iron hold fast 40 cm long including
fixing to frame with 10 mm diameter bolts, nuts and wooden
plugs and embedding in cement concrete block
30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6
graded stone aggregate 20mm nominal size).
Renewal of old putty of glass panes (length)
Applying priming coat : With ready mixed pink or Grey
primer of approved brand and manufacture on wood work
(hard and soft wood).
Total =
30.00
Nos
110.20/
Each
3306.00
50.00
Metre
45.00
Sqm
21.20/
Metre
30.75/
Sqm
1060.00
I/We offer to execute the work at …………………% above the estimated cost.
I/We offer to execute the work at…………………..% below the estimated cost.
Signature of Tenderer
1383.75
Rs.15,44,017.16