Features
• 2 Models: 4X1200 and 4X2000
• Touring/event/mobile version: e-version
Version for fixed installations: i-version
• Output power: 4x1200/2000 watts @ 2 ohms
in only 2 RU each
• Absolutely reliable steady-state performance
• Excellent sound and superior impulse response
• Impedance measurement
• Selectable Clip Limiter (hard/soft)
• 4-channel Dante™ inputs (optional)
• SXL II Data Port (RS485) for monitoring and
control of up to 16 channels via
Bittner SXL II Control Interface
• High tech SMT design
• Two separate stereo amplifiers
• Protection Circuits: DC, LF, HF, Thermal, Short Circuit,
Current Limiter, 3 ms Muting Delay
• XLR inputs and SPEAKON outputs (e-version)
• High-End switched power supply with PFC
• LED indicators for SIGNAL, CLIP, PROTECT, POWER
• Temperature controlled, variable speed low noise fans
• Digital wear-free Volume Controls
(can be operated manually)
• Selectable Stereo/Bridged Mode
• Softstart
• Sequential Remote Power On
• 2 Alive Contacts
• 3 Years Warranty
Connectors and Controls
Audio Inputs:
• analog: XLR / mono jack connectirs (Neutrik Combo)
• digital: RJ-45 (Dante™; optional)
Loudspeaker Outputs:
• SPEAKON
Volume Controls:
• 4 digital potentiometers with 16 steps each:
-90, -78, -66, -54, -42, -30, -24, -18, -15, -12,
-9, -6, -3, -2, -1, 0 dB
Remote Power On:
• Contacts 7-10 of a 10-pin PHOENIX connector.
On: +12V, Off: -12V. Delay of incoming voltage for
sequential amps in a daisy-chain.
Alive Contacts:
• Contact 1-6 of a 10-pin PHOENIX connector.
1 contact for 2 channels each (1+2, 3+4).
DIP Switch with 8 Switches:
• Switch 1/2: Address for SXL-connection.
• Switch 3: Dante™ On/Off
• Switch 4/5: Limiter On/Off, Hard/Soft
• Switch 6: BRIDGE On/Off for channel 1/2
• Switch 7: BRIDGE On/Off for channel 3/4
• Switch 8: n.c.
SXL Dataport:
• RS-485, 2 RJ-45 jacks (8-pin) paralleled,
1 LED TX / RX
Power:
• Power switch, fuse and powerCON connector
All Specifications Subject to Change without Notice.
Errors and omissions excepted.
All Specs under www.bittner-audio.com
DECLARATION OF CONFORMITY
We declare that this product is in accordance with
EMC regulation 89/336/EEC and meets the requirements of the
product norm EN-55013 (emission), and EN-55020 (immission).
Bittner 4Xe.
Groundbreaking technology for
event and mobile applications.
Much more than just power!
4x superior sound and solid
durability, combined with amazing
and leading technology.
Audio networking via Dante™.
Control via Ethernet (with SXL II) –
worldwide diagnostics and
maintenance via the Internet.
4 Separate Channels
and 4 Floor Monitors
Example: Right Section
Output 1
Floor
Monitor 1
Output 2
Bittner
4X1200e
with Dante™
Floor
Monitor 2
Output 3
Input
Floor
Monitor 3
Output 4
Floor
Monitor 4
Input Analog 1
Input Analog 2
Input Analog 3
Input Analog 4
4 Separate Channels
and 8 Floor Monitors
Example: Right Section
Output 1
Floor Monitor 1
Floor
Monitor 2
Floor Monitor 3
Floor
Monitor 4
Floor Monitor 5
Floor
Monitor 6
Floor Monitor 7
Floor
Monitor 8
Output 2
Bittner
4X2000e
with Dante™
Output 3
Input
Output 4
Input Analog 1
Input Analog 2
Input Analog 3
Input Analog 4
Analog Audio
www.bittner-audio.com
Application Example PA:
2 Tops und 2 Subs
Each Channel is Separately Controlled and Processed
Example: Right Section
Bittner
4X2000e
with Dante™
Output 1
Top 1 R
Far
Output 2
Top 2 R
Near
Output 3
Sub 1 R
Output 4
Sub 2 R
Input
Input Analog 1
Input Analog 2
Input Analog 3
Input Analog 4
Application Example PA:
4 Tops und 4 Subs
Control of Two Loudspeakers per Channel
Example: Right Section
Output 1
Top 1 R
Top 2 R
Output 2
Bittner
4X2000e
with Dante™
Top 3 R
Top 4 R
Output 3
Sub 1 R
Sub 2 R
Input
Input Analog 1
Input Analog 2
Input Analog 3
Output 4
Sub 3 R
Input Analog 4
Sub 4 R
Analog Audio
www.bittner-audio.com
State-of-the-Art
Speaker Management and Dante™ Networking
Example: Right Section (16 Separate Channels )
Lectrosonics DNT0212, Network Management
Input
Network Switch
Output 1
Output
1,2,3,4
Output
5,6,7,8
Output
9,10
11,12
Output
13,14,
15,16
Output 2
Output 3
Input
1,2,3,4
Output 4
Output 5
Bittner
4X1200e
with Dante™
Top 1 R
Top 2 R
Top 3 R
Top 4 R
Top 5 R
Output 6
Top 6 R
Output 7
Input
5,6,7,8
Top 7 R
Top 8 R
Output 8
Output 9
Output 10
Input
9,10
11,12
Output 11
Bittner 4X2000e with Dante™
Output 12
Input
13,14,
15,16
Sub 1 R
Sub 2 R
Sub 3 R
Sub 4 R
Output 13
Sub 5 R
Output 14
Sub 6 R
Bittner 4X2000e with Dante™
Output 15
Sub 7 R
Analog Audio
Output 16
Sub 8 R
Bittner Audio International GmbH · Forststrasse 21a · D-95488 Eckersdorf
Phone: +49 (0)921 5070368-0 · Fax: +49 (0)921 5070368-9 · www.bittner-audio.com
Dante™ is a trademark of Audinate Pty Ltd.
Bittner
4X1200e
with Dante™