LIGHTSCALE™ BOLLARD
LIGHTSCALE™ BOLLARD
TECH BRIEF
PRODUCT
DATA
T 800.451.0410 | www.forms-surfaces.com
© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
page 1 of 1 | Rev. 03-14-16
LIGHTSCALE™ BOLLARD
PRODUCT DATA
With its smooth, organic lines and subtly curved profile, the LightScale Bollard is designed to settle harmoniously into any natural setting. Originally
conceived as a path light, its gentle arc allows mounting beside a walkway or street, providing light without taking up walk space.
MATERIAL & CONSTRUCTION DETAILS
INSTALLATION & MAINTENANCE
COLUMN
FINISH
LAMP
INSTALLATION
• Column is made from a formed
aluminum extrusion.
• See the Forms+Surfaces Powdercoat
Chart for details. Custom RAL colors are
available for an upcharge.
• Linear fluorescent lamps are offered in
40W. See lamp information
on page 2.
• Standard mounting is surface mount
with J-bolts and 1/4" thick stainless
steel base plate.
• Due to the inherent nature of metal
castings, gloss powdercoats are not
offered for cast components.
• Installation of a surge protector as part of
each units wiring is recommended.
• Stainless steel hardware is included.
Template is available upon request.
TOP CAP
WEIGHT
BALLAST
MAINTENANCE
• Cast aluminum cap is attached
with recessed security socket
cap screws.
• 27 lbs (12 kg)
• Electronic, thermally protected, 120V or
277V ballast for 40W single twin tube
4-pin fluorescent lamp, instant start,
-20 ºF starting temperature.
• Metal surfaces can be cleaned as
needed using a soft cloth or brush with
warm water and a mild detergent. Avoid
abrasive cleaners.
NOMINAL DIMENSIONS
BASE PLATE MOUNTING DETAIL
top cap
custom bent
aluminum extrusion
housing
42"
(1058 mm)
0.63" (16 mm) dia. thru
for 1/2-13 anchor bolts
typ (3) holes
2.0" (51 mm)
dia. thru for
conduit opening
2.5"
(63.5 mm)
5.0"
(127 mm)
UV-stabilized white
acrylic lens
5.75"
(146 mm)
lamp
8.24"
(209 mm)
socket for 2G11 base
ballast within waterproof
enclosure
conduit with wire
whip (not shown)
base plate with
anchor bolts and
cutout for conduit
18.0" (457 mm)
min. for cast-inplace J-bolts
cast-in-place J-bolt
anchors (drop-in type
anchors may also be
used)
poured concrete footer
T 800.451.0410 | www.forms-surfaces.com
© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
page 1 of 3 | Rev. 03-14-16
LIGHTSCALE™ BOLLARD
PRODUCT DATA
LAMP DESCRIPTIONS
LAMP
DESCRIPTION
BASE
COLOR TEMPERATURE
LUMINAIRE LUMENS*
B.U.G. RATING
FT40 BX
40W single twin tube 4-pin compact fluorescent
2G11
4,100K
2,062
B1-U4-G2
*Luminaire lumens represents the absolute photometry for the luminaire, and indicates the lumens out of the entire fixture.
POLAR CANDELA PLOT
0-180º
90-270º
ISOFOOTCANDLE PLOT
706
18.0'
529
12.0'
353
176
6.0'
0'
3
-6.0'
-12.0'
10
5
2
1
.5 .75
.25
-18.0'
Polar Candela Plot shows luminous intensity distribution (Cd/1000lm)
for vertical plane through specified horizontal angles (above) with 40W
fluorescent 2G11 base lamp. IES files for standard lamps are available on
our website.
-12.0'
18.0'
12.0'
6.0'
0'
-6.0'
-18.0'
Isofootcandle Plot shows light distribution pattern at ground level with 40W
fluorescent 2G11 base lamp. Readings have been taken assuming the
photometric center of the luminaire to be 2.40 feet above ground level. IES
files for standard lamps are available on our website.
CERTIFICATION
• UL and C-UL listed for wet locations.
ENVIRONMENTAL CONSIDERATIONS
• Please refer to the LightScale Bollard Environmental Data Sheet for detailed environmental impact information.
• Metal components have a long life cycle and are 100% recyclable.
• 68% recycled content.
• Powdercoat finishes are no- or low-VOC, depending on color.
• Low maintenance; easy to disassemble.
T 800.451.0410 | www.forms-surfaces.com
© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
page 2 of 3 | Rev. 03-14-16
LIGHTSCALE™ BOLLARD
PRODUCT DATA
NET PRICING AND ORDERING INFORMATION (pricing does not include freight)
MODEL
LBLSC-CF
DESCRIPTION
LightScale Bollard
Optional Premium Texture from Forms+Surfaces Powdercoat Chart
Custom RAL Powdercoat color
NET PRICE (US $)
please call for pricing
+ $200 per color/per order
please call for pricing
TO ORDER SPECIFY: quantity, powdercoat color, lamp, voltage.
LEAD TIME: 6 to 8 weeks. Shorter lead times may be available upon request. Please contact us to discuss your specific timing requirements.
T 800.451.0410 | www.forms-surfaces.com
© 2016 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.
page 3 of 3 | Rev. 03-14-16