GE Lighting Solutions Roadway Lighting 201SA Unit Pack (SAM) imagination at work Product Features GE Roadway Lighting systems have been recognized for the highest quality and reliability in Outdoor, Utility, DOT and infrastructure lighting applications. Applications Unique Features • For outdoor work yards, roadside commercial establishments, suburban developments, rural areas Housing • • • Housing • Die-cast aluminum hood Finish • Polyester powder gray paint finish Rating • / Listed for wet location available as an option Mounting • • Slipfitter is designed for 1-1/4 in. pipe Mounting Hardware Kit — (1) 5/8 x 10 Throughbolt and Nut (15.9mm x 254mm) — (2) 3/8 x 3 Lag Screws (9.5mm x 76mm) Reflectors • Skygard™ reflector provides IESNA Full Cutoff Complete unit pack in one package standard: includes hood, optical, lamp, PE control, prewired cable and mounting hardware Mogul base socket - E39 standard Terminal board and plug-in ignitor are standard Ordering Number Logic 201SA Unit Pack (SAM) S _ A_ M _ - _ _ Prod. ID SAM = 201SA Type unit pack wattage S _ - Light Source 07 = 70 S = HPS 10 =100 15 =150 (55V) _ N _ - ballast type selection Voltage 1 = 120 3 = 240* *240 available for 100W HPS only N = NPF Reactor or Lag - _ PE Function 2 = PE Receptacle 5 = PE Receptacle with PE Control - _ Cable 1= 2= 4= 5= 6= - _ Mounting Bracket - ____ Lens type None L = Long 24-in. V3AL =Open Type 3 3-ft #14 (610mm) Acrylic Latch 5-ft #14 N =None Type 8-ft #14 V5AL =Open Type 5 8-ft #10 Acrylic Latch Type V5SL =Open Type 5 Skygard aluminum reflector Latch Type, meets Full Cutoff * requirements * = Previously IESNA Full Cutoff Optics Photometric Selection Table 201SA OPTICAL (V3AL, V5AL) Wattage Light Source IES Type Photometric Curve Number 70, 100, 150 (55V) HPS Symmetric 35-176919 70, 100, 150 (55V) HPS Asymmetric 35-178983 Photometric Selection Table SKYGARD™ OPEN FULL CUTOFF REFLECTOR (V5SL) Wattage Light Source IES Type Photometric Curve Number 70 HPS Symmetric 35-452513 100 HPS Symmetric 35-452512 100 HPS Symmetric 35-452511 - _ Lamp type C =Clear E =Clear ECO Lamp N =No Lamp P =Encapsulated Ignitor S =Standby Dual Arc Tube Lamp Y =Clear ECO NC Lamp Product Dimensions MOUNTING BRACKET 27.375 in. (695 mm) Thru Bolt 17.000 in. (432 mm) 2.500 in. (64 mm) D ATA 12.500 in. (318 mm) • Approximate Net Weight Long 24 in. (610 mm) Mounting Bracket: 16 lbs (7.3 kgs) • Effective Projected Area: 1.37 sq. ft. max. (0.1 sq. M max.) • Suggested Mounting Height: 12-25 ft. (4-8 M) SKYGUARD OPTICAL 27.375 in. (695 mm) Thru Bolt 17.25 in. (438 mm) 2.500 in. (64 mm) FULL CUTOFF* SKYGARD® REFLECTOR D ATA 13.75 in. (349mm) *= Previously IESNA Full Cutoff Optics • Approximate Net Weight Long 24 in. (610 mm) Mounting Bracket: 17 lbs (7.7 kgs) • Effective Projected Area: 1.4 sq. ft. max. (0.13 sq. M max.) • Suggested Mounting Height: 12-25 ft. ( 4-8 M) GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com 1-8 8 8 - 6 9 - 4 3-533 GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. OLP-2937 (Rev. 06/13/12)
© Copyright 2024 Paperzz