Using a downloaded wallpaper
from the JVC support site as the background
How to make your own wallpaper
You can change your AVX wallpaper that is downloaded from the JVC support site.
1 Prepare the picture that you want to make as your own wallpaper.
URL : http://www.jvc.com/english/car/wallpaper/index.php
Download the JPEG and save it to your USB Device.
Then, connect your USB Device to JVC AVX Receiver.
While viewing a downloaded JPEG, you can capture an image
and use the captured image as a background.
1 From USB Device, display a downloaded JPEG.
2 Cut out the picture that you want.
And change the aspect setting to "Full".
Picture size must be as follows;
NTSC : 938 x 480 pixels
2 On <AV Menu>:
PAL : 938 x 576 pixels
NTSC : 938 x 480 pixels
PAL : 938 x 576 pixels
3 Display <Display Design>.
3 Resize the picture to the size below and save as a JPEG..
NTSC : 720 x 480 pixels
PAL : 720 x 576 pixels
NTSC : 720 x 480 pixels
PAL : 720 x 576 pixels
4
76.7%
*NTSC / PAL depends on AVX Receiver setting.
Note
5 Set the image.
Picture image will resize on AVX Receiver:
PC
KW-AVX84x /74x /64x series
Width
130.0%
76.7%
Starts playback/pauses
Confirm the zoom setting "Full".
- If you don't set "Full", the downloaded image
may be larger size than the AVX screen.
6 Capture the image displayed on the screen.
After the confirmation message appears, press [Yes] to
store the newly captured image. (The existing image
is replaced with the new one.)
・Press [No] to return to the previous screen.
- Aspect setting of AVX
Receiver is "Full".