Brisk® Advanced Formula Laundry Detergent outperforms
the competition in cold or hot water. Special dispersants keep
clothes looking new wash after wash. High-tech brighteners
make your whites and colors brilliant. Formulated with a
fresh clean scent. Septic safe.
Brisk® Advanced Formula Laundry Detergent
ST-145 (Refill*), ST-163 (With Pump)
300 oz. bottle
ST-No.
Case UPC No.
Mfg. No. 071206
Each UPC No.
Mfg. No. 071206
Case Size
Case Weight
Cases/Pallet
ST-157
015709
001573
4 x 100 fl. oz.
30 pounds
40
ST-145
014504
001450
2 x 300 fl. oz. (refill*)
44 pounds
36
ST-163
016300
001634
2 x 300 fl. oz. (w/pump)
44 pounds
36
ST-1040
010407
N/A
5 gallon pail
45 pounds
36
ST-1041
010414
N/A
15 gallon drum
145 pounds
9
ST-1042
003836
N/A
55 gallon drum
515 pounds
4
* Use with ST-322 Brisk® Advanced Pump (for 300 oz. bottles)
Directions
1. Pre-treat tough stains. Apply Brisk Advanced full strength
onto the stain, rub firmly and add to the washload.
NOTE: Always check the care label of the garment you
are washing. Be sure to test colorfastness by pre-soaking
an inside seam.
2. Select water temperature and washing machine cycle
from the garment’s care instruction label. Special soil
dispersants in Brisk® Advanced get clothes clean in any
water temperature. Hot or Cold.
3. For medium-size loads - 3 pump strokes (about 1/3 cup)
into a cup. For large loads, heavily-soiled clothes, or
when washing in hard water - 4 pump strokes (1/2 cup).
4. Add Brisk® Advanced as the washing machine fills with
water. Then add clothes. If bleach is desired, add bleach
after the wash cycle has begun.
®
Chemical Characteristics
Abrasive.................................................no
Appearance.............................. blue liquid
Biodegradable...................................... yes
Corrosive ...............................................no
Fragrance................................. fresh scent
Non-Acid.............................................. yes
Non-Butyl............................................. yes
Non-Flammable .................................. yes
pH (concentrate)......................... 10.5±0.5
Phosphate-free .................................... yes
VOC Compliant.................................. yes
Ingredients
The primary ingredients in Brisk® Advanced are anionic surfactants, soil dispersants, and brighteners.
STEARNS PACKAGING CORPORATION
4200 SYCAMORE AVENUE • MADISON, WISCONSIN 53714
Telephone: (800) 655-5008 • (608) 246-5150 • Fax: (608) 246-5149
E-mail: [email protected] • http://www.stearnspkg.com
145tek-S 02/15