Pag. 1/2
GRACE
Data sheet nr. DEC-1034
Beauty reigns sovereign
A pearlescent light runs through Grace’s texture, giving bright and changing reflections to every surface.
Grace is an acrylic water finish inspired to the unforgettable Fifties perfect for value interiors which gives them a touch of
inborn and timeless class.
TECHNICAL DETAILS
GRACE Decorative colour System consists of:
•
•
•
•
FINE FASHION PRIMER – Acrylic water primer for interiors
GRACE DIAMOND – Acrylic water finish with fine pearlescent effects
GRACE PEARL – Acrylic water finish with changing bright reflections.
GRACE Ready colours
PREPARATION OF THE SURFACES AND OF THE COLOURS
•
Suitable surfaces
All the plaster, gesso, stucco primers and all the flat and smooth surfaces are suitable.
•
Preparation of the surfaces
After a thorough cleaning and plastering of the surfaces, apply a coat of FASHION FIX diluted 1:3 with water by a brush.
If the surfaces are particularly chalked it is advisable to apply first a coat of FASHION FIX diluted 1:6 with water.
Apply the diluted product with brush, in a single coat, until complete impregnation of the surface.
•
Application of FINE FASHION PRIMER
After having adequately prepared the surfaces, apply FINE FASHION PRIMER in one or two coats with a short hair roller
(item 490.20); in case of particularly absorbent walls, apply first a coat of FINE FASHION PRIMER diluted to 30-40% with
water.
•
Application of GRACE DIAMOND – GRACE PEARL
GRACE is ready for use and shall be applied in a single coat. After having accurately prepared the surface as indicated in
the data sheet, apply the product following one of the recommended techniques, in order to obtain various decorative
effects.
The product is easy to apply and its spreading and application do not create problems of junctions on the walls.
•
PREPARATION of COLOURS
In order to obtain the colours of the catalogue, simply add the 750 ml - 250 ml - 50 ml FASHION COLOUR in the relative
bases of GRACE and mix manually.
Different doses from those mentioned create different tints from those showed in the catalogue.
LINEN EFFECT
Dip the appropriate brush (item 955.7 - 955.10) into GRACE and apply a coat with cross brush strokes giving a spatulated
effect on the surface prepared with FINE FASHION PRIMER, avoiding clear squaring; carry on with the decoration until the
brush gets unloaded, so as to have no neat overlaps of colour. In order to obtain a more nuanced effect and make the
distribution of the product more homogeneous, go over the treated surface once again using the unloaded brush.
The amount of material used, the size, shape and intensity of brush strokes determine the tailored decorative effect.
Theoretical yield: 10-12 square meters/litre.
Pag. 2/2
Data sheet nr. DEC-1034
CASHMERE EFFECT
Dip the appropriate brush (item 955.7 - 955.10) into GRACE and apply a coat with cross brush strokes giving a spatulated
effect on the surface prepared with FINE FASHION PRIMER, avoiding clear squaring; work on a surface of about 2-3 square
meters and carry on with the decoration until the brush gets unloaded, so as to have no net overlaps of colour and to obtain a
homogeneous distribution of the product. After about 5-10 minutes, go over the treated surface with an unloaded double blade
spatula ( item 368), with cross and irregular movements. The amount of material used, the size, shape and intensity of brush
strokes determine the tailored decorative effect.
Theoretical yield: 8 – 10 square meters/litre.
COTTON EFFECT
Dip the appropriate brush (item 955.7 - 955.10) into GRACE and apply a coat on a surface of about 2-3 square meters
prepared with FINE FASHION PRIMER; the applicative technique consists in working the product with oblique and irregular
brush strokes, alternating bands with the application of the colour to others temporarily leaved without product; after about 510 minutes, go over the treated surface once again with unloaded brush and with irregular movements, smoothing the already
decorated part and softening it towards the contiguous area which is without product. In order to obtain a more nuanced effect,
make the distribution of the product more homogeneous and eliminate any line left by the brush, go over the treated surface
with unloaded tool. The amount of material used, the size, shape and intensity of brush strokes determine the tailored
decorative effect.
Theoretical yield: 12 – 14 square meters/litre.
SILK EFFECT
Using a double blade spatula ( item 368), apply with cross strokes a first coat of GRACE on the surface prepared with FINE
FASHION PRIMER: cover about 2-3 square meters; before it is completely dry, smooth the product with unloaded tool to
eliminate any imperfections or excesses of material due to the smoothing. When the first coat is completely dry, after about 4-6
hours, spread a second thin coat with the same modalities: also in this case eliminate any imperfections with unloaded tool.
The amount of material used, the size, shape and intensity of spatula strokes determine the tailored decorative effect.
Theoretical yield (referred to two coats): 6-8 square meters/litre.
PACKAGES
FINE FASHION PRIMER: 5 and 15 Litres
GRACE: 1 and 5 Litres
INSTRUCTIONS
• Should the preparation of more packages of the same colour be required please use products and colours of the same
production lot.
• In order to reproduce perfectly the effects presented in the catalogue and make the decoration easy , please use the
suggested tools.
• Do not apply the product with temperatures of the environment and /or the support below +5 ° C and above +35 ° C
and/or with relative humidity of the environment> 85% and of the support >10%
• Keep the product in its original container, well sealed and at temperatures between +5 ° C and +40 ° C, sheltered from
sun and frost.
The colours in the catalogue have a merely indicative value.
www .ecladecoration.it/ – email: [email protected]
Rev. 01 – January 2010
The values indicated in this sheet are the result of laboratory testing and practical tests and therefore are susceptible to modifications which can be brought
further to new experiences and continuous research, The indications concerning the manners of use and the results which can be obtained with our product
correspond to our real experiences but do not represent any commitment and liability, therefore the sale of the product is not covered by any warranty
concerning the application and is made under the agreement that the user will establish the suitability to his/her applications.