Who are you and who is the upstand kit for...
Project/Customer:
Merchant:
Phone:
Contact Name:
Fax:
Silicone to be applied
under the flashing.
Wall Tiles
Side
profile of
upstand
kit
Tile Adhesive
Waterproof Membrane
HOW TO INSTALL YOUR RETROFIT TILE UPSTAND KIT
15mm
Is your channel being installed hard up against a wall?
If so, then you will need a tile upstand kit. Please note: If the tile upstand kit is required, this will add 14mm to the overall body
dimensions on each upstand side.
Please tick the box below that best describes the location of the walls so we can provide you with the right kit for the job.
Rear
One end only
Rear and left
Rear and right
Please note that the two options listed below will require a custom grate to also be manufactured.
Both ends Three sides
Please let us know the measurements needed and anything else you’d like to tell us?
Time to get serious....
Please note that once this signed from along with a purchase order for your custom made Reef Retro-Fit tile upstand kit is received by
Pride Industries, the order cannot be cancelled or returned for credit. Basically, it becomes yours to keep forever, so please make sure
that ALL THE DETAILS ARE CORRECT and get the end user or installer to double check as well.
I understand and agree with the above conditions of purchase.
Signed:
Print Name:
Date:
8.9.2011
Pride Industries is a Western Australian family-owned manufacturer and
wholesaler of quality plumbing products. We have been supplying Australian
homes with superior products for over thirty years.
In Reef, Pride continues to lead the way in product design, innovation and
manufacture. Available from leading plumbing supplies stores or you can contact us for your nearest outlet.
23 Munt St Bayswater WA 6053
T (08) 9272 6511 F (08) 9272 3427
E [email protected] reefchannel.com.au
Reef Retro-fit tile upstand kit quote request form
Order No: