-10 °C
PLANA P PREMIUM
PLANA P PREMIUM Mineral
PLANA P PREMIUM and PLANA P PREMIUM Mineral are plastomeric
waterproofing membranes with excellent performance indicated for the
waterproofing of all structures.
Guaranteed Quality
UNI EN ISO 9001:2008 and
UNI EN ISO 14001:2004
Product in compliance
with European Standards
Polyglass is a member of
Green Building Council
Bituminous membrane
polymeric matrix
ageing control
All year membranes
Lateral and endlap
sealing strips
WATERPROOFING MEMBRANES
COLD FLEXIBILITY
Easily flamed non-stick
polyethylene film
Manufacturers of
Bitumen Distillate
Polymer Membranes
Rev. 1/16
TECHNICAL DESCRIPTION
PLANA P PREMIUM and PLANA P PREMIUM MINERAL are plastomeric waterproofing membranes
with outstanding performance, made of a latest generation distilled bitumen-based compound modified
with POLYPROPYLENE and highly performing non-woven polyester stabilized reinforcement. The general
characteristics of these membranes guarantee good versatility and adaptability to various types of use. The
special type of compound ensures remarkable characteristics of low temperature flexibility. The sophisticated
technology with which these membranes are made guarantees the product’s quality, stability, and durability.
PLANA P PREMIUM, due to its high volumic resistivity (439,80 TΩcm), can be used to isolate from possible
form of “stray currents” in the ground near electric rail and tram lines. The special type of compound ensures
remarkable characteristics of low temperature flexibility and due to its waterproof properties this membrane
does not absorb humidity and its electrical resistance remains unaltered in time.
DESTINATION
SINGLE LAYER
PRODUCT
E.
U.H.P.
MULTI-LAYER
ROOT BARRIER VAPOUR BARRIER FOUNDATIONS UNDER ROOFING TILE
F.L.
U.L.
R.D. G.W.
E. U.H.P. E. U.H.P.
PLANA P PREMIUM
PLANA P PREMIUM Mineral
3 mm
•
•
4 mm
•
•
•
•
•
4 kg Mineral
•
4,5 kg Mineral
•
5 kg Mineral
•
F.L.: Finishing Layer - U.L.: Underlying Layer - R.D.: Rising Damp - G.W.: Ground-water - E.: Exposed - U.H.P.: Under Heavy Protection
PLANA P PREMIUM and PLANA P PREMIUM MINERAL membranes are suited for the waterproofing of
traditional, metal, prefabricated civil and industrial structures. Waterproofing systems under heavy protection
can be laid in single layers (whenever permitted by product) or multiple layers with minimum thicknesses of
7 mm (4+3 mm).
APPLICATION: INSTRUCTIONS AND RECOMMENDATIONS
PLANA P PREMIUM can be provided with its upperside covered with a talc, sand, or a non woven polypropylene
fabric. Its underside is protected and faced with
(reduced printed area increases
product adhesion), the special non-stick polyethylene film to be flamed during laying. In the MINERAL version,
the upperside is protected by an even layer of colored or natural mineral slate chips and features
(patented) lateral and endlap sealing strip for easy overlapping. Support surfaces must be dry, clean, and
sufficiently smooth and level. Application is made by light flaming with propane gas. Laying is quick and easy.
We recommend slightly heating the roll of membrane prior to laying in Winter.
Talc
Sand
A non woven polypropylene fabric
Lateral sealing strip
Endlap sealing strip
(endlap)
STOCKING
Keep the products packed in the carton box in a dry place, away from direct sunlight. Do not place the pallets,
one on top of another and the rolls must always be stocked in a vertical position. The contact with solvents
and organic liquids may damage the product. Avoid application if the temperature is excessively low or
high, avoid stamping (shoes with crampons, small objects or sharp edges). For further information contact
Polyglass SpA Technical Office.
Rev. 1/16
Keep out of direct sunlight
Avoid stocking pallets
without evenly distributing
the load
Keep the rolls standing
Absolutely avoid
puncturing the product
EN 12310-1
EN 1107-1
EN 1108
EN 1109
EN 1110
EN 1110
EN 1296
EN 1297
EN 12039
EN 1931
EN 1850-1
NOMINAL
VALUES
≥10
≥1
Pass
3 - 4 (±0,2)
NPD
Pass
NOMINAL
VALUES
≥10
≥1
Pass
NPD
4,5 - 5 (±5%)
Pass
kPa
Pass
Pass
kPa
Pass
Pass
%
Euroclass
N/50 mm
N/50 mm
FRoof
E
-
FRoof
E
-
N/50 mm
N/50 mm
%
%
mm
kg
800 (±20%)
600 (±20%)
40 (±15)
40 (±15)
≥900
≥15
PLANA P PREMIUM MINERAL
EN 12691-A
EN 12730-A
UNIT
OF MEASURE
m
m
mm/10 m
mm
kg/m2
kPa
PLANA P PREMIUM
EN 12311-1
TECHNICAL
CHARACTERISTICS
LENGTH
WIDTH
STRAIGHTNESS
THICKNESS
MASS PER UNIT AREA
WATERTIGHTNESS
WATERTIGHTNESS AGAINST
ARTIFICIAL AGEING
WATERTIGHTNESS AGAINST
CHEMICAL
WATERTIGHTNESS AFTER STRETCHING
EXTERNAL FIRE PERFORMANCE
REACTION TO FIRE
PEEL RESISTANCE
SHEAR RESISTANCE
TENSILE PROPERTIES
MAXIMUM LOAD AT BREAK
Longitudinal
Transversal
ELONGATION AT BREAK
Longitudinal
Transversal
RESISTANCE TO IMPACT
RESISTANCE TO STATIC LOADING
RESISTANCE TO TEARING
Longitudinal
Transversal
DIMENSIONAL STABILITY
FORM STABILITY UNDER CYCLIC
TEMPERATURE CHANGE
COLD FLEXIBILITY
FLOW RESISTANCE AT ELEVATED
TEMPERATURE
ARTIFICIAL AGEING BEHAVIOUR
(FLOW RESISTANCE)
ARTIFICIAL AGEING BEHAVIOUR
(VISIBLE DEFECTS)
ADHESION OF GRANULES
WATER VAPOUR PROPERTIES
VISIBLE DEFECTS
800 (±20%)
600 (±20%)
40 (±15)
40 (±15)
≥900
≥15
N
N
%
150 (±30%)
150 (±30%)
≤0,3
%
-
-
°C
≤-10
≤-10
°C
≥120
≥120
°C
≥100
≥100
-
Pass
-
%
μ
-
20000
ABSENTS
≤30
20000
ABSENTS
POLYGLASS SPA reserves the right to make any and all modifications required for the ongoing perfection of the product without notice.
TECHNICAL SPECIFICATIONS
TEST
METHOD
EN 1848-1
EN 1848-1
EN 1848-1
EN 1849-1
EN 1849-1
EN 1928-B
EN 1928-B
EN 1296
EN 1928-B
EN 1847
EN 13897
EN 13501-5
EN 13501-1
EN 12316
EN 12317
150 (±30%)
150 (±30%)
≤0,3
In compliance with EN 13707 products standards (layers for roofing) and EN 13969 TYPE T products standards (layers for foundations).
DIMENSIONS - PACKAGING
PRODUCT
PLANA P PREMIUM
PLANA P PREMIUM
PLANA P PREMIUM MINERAL (Grey)
PLANA P PREMIUM MINERAL (Other colours)
PLANA P PREMIUM MINERAL (Grey)
PLANA P PREMIUM MINERAL (Other colours)
PLANA P PREMIUM MINERAL (Grey)
PLANA P PREMIUM MINERAL (Other colours)
THICKNESS
mm
WEIGHT
kg/m2
DIMENSIONS
m
3
4
-
4
4
4,5
4,5
5
5
1x10
1x10
1x10
1x10
1x10
1x10
1x10
1x10
AVAILABLE COLOURS
Upperside protected with coloured mineral slate chips:
Grey
Green
Red
White
Brown
Rev. 1/16
WATERPROOFING MEMBRANES
APPLICATION METHOD
1
2
3
4
5
6
7
8
9
10
11
12
300 gr/m2
1 2 3 4 5 6 7 8 9 10 11 12/16
12 Treat the area to be waterproofed with bituminous primer (POLYPRIMER HP 45 Professional).
Position the “Bordangolo” near the horizontal-vertical joint.
Completely strip away the product identification tape.
In the colder months, we recommend heating up the roll of membrane before applying it.
Position and apply the sheet by flaming its bottom surface.
Pull the sheet up to a certain height against vertical surfaces.
Apply the second sheet with adequate overlapping.
Lay the second layer by overlapping. Do not cross the sheets.
Roll the overlapping areas using the special pressing roller.
Example of internal corner.
Example of external corner.
Example of vent pipe.
Rev. 1/16
POLYGLASS SPA reserves
the right to make any and
all modifications required
for the ongoing perfection
of the product without
notice.
POLYGLASS SPA
Registered Office: Viale Jenner, 4 - 20159 MILANO
Head Office: Via dell’Artigianato, 34 - 31047 Ponte di Piave (TV) - Italy
Tel. +39 04227547 - Fax +39 0422854118 - www.polyglass.com - [email protected]