APPENDIX A - FOOTPRINT CUTOUTS
INTRODUCTION
Figures A-1 and A-2 are footprint cutouts of various Signature
Series work station components. Figure A-1 has a scale of one
millimeter equals 50 millimeters, and Figure A-2 has a scale of
¼-inch equals one foot. These drawings are intended to help in
control room layout and design.
To use the cutouts, make copies and cut out the various components and place them on grid paper of the proper scale. This
will insure the most effective use of the available floor space.
I-E96-197-10A
INTRODUCTION
A-1
FOOTPRINT CUTOUTS
®
PROCESSOR/MONITOR BAYS
WITH ELBOW
AUXILIARY PANEL BAYS
WITH ELBOW
ELBOWS
SCALE = 1:50
1.0 M
TP20447A
Figure A-1. Footprint Cutouts (1 mm = 50 mm)
INTRODUCTION
A-2
I-E96-197-10A
FOOTPRINT CUTOUTS
PROCESSOR/MONITOR BAYS
WITH ELBOW
AUXILIARY PANEL BAYS
WITH ELBOW
ELBOWS
SCALE: ¼-IN. = 1.0 FT
3.0 FT
TP20448A
Figure A-2. Footprint Cutouts (¼-in. = 1 ft)
I-E96-197-10A
INTRODUCTION
A-3
®