182 Northwest Industrial Court • Bridgeton, Missouri 63044 • www.lionmachinery.com
PH: (314) 638-0100 ext: 353 • Fax: (314) 373-7687 • email: [email protected]
www.lionmachinery.com
LION PNEUMATIC CLOSED END CLEAT FOLDERS
• Heavy Duty • Table height designed to accommodate large pre-formed ducts or flats
• In service for over 30 years!
Mild steel capacity ..............................18 gauge and lighter
Bend length........................................3 inches to 36 inches
Bend width .........................................7/16 inches to 1 inch
Table height...........................................................24 inches
Table depth.....................................................21-1/2 inches
Air consumption.....................< 0.5 cu ft/cycle at 100 P.S.I.
Machine color..............................................................Black
Machine dimensions................................34H x 47W x 40D
Machine weight ..............................................1,100 pounds
Shipping (Crated approx. 48H x 58W x 46D) ........Class 85
Labor warranty.........................................................30 days
Parts warranty .....................................................24 months
Model No.
Description
1836-3-3
3 Position back gauge with toggle switch, preset at 1”, 5/8” and 7/16” with
3 bend angles preset at 180º, 90º and 45º (other settings available)
1836-2-3
2 Position back gauge with toggle switch, preset at 1” and 5/8” or 7/16” with
3 bend angles preset at 180º, 90º and 45º (other settings available)
1836-1-3
1 Position back gauge, preset at 1” or 5/8” or 7/16” with
3 bend angles preset at 180º, 90º and 45º (other settings available)
1836-0
Clearbender Only. Fixed back gauge, preset at 7/16” or 1/2” with
a bend angle preset at 180º
LION PNEUMATIC OPEN THROAT CLEAT BENDERS
• Light weight • Turns drives on “L” shapes, pre-formed ducts and flats
• Table height designed to decrease operator fatigue
Mild steel capacity ..............................................................................20 gauge and lighter
Bend length .....................................2030A ................................3 inches to 29-1/4 inches
.........................................................2024A .................................3 inches to 23-1/4 inches
Bend width..........................................................................................7/16 inch or 1/2 inch
Table height...........................................................................................................36 inches
Table depth.....................................................................................................15-1/2 inches
Air consumption.....................................................................< 0.5 cu ft/cycle at 100 P.S.I.
Machine color ..............................................................................................................Black
Labor warranty.........................................................................................................30 days
Parts warranty .....................................................................................................24 months
Machine dimensions ......................2030A..............................................46H x 45W x 26D
.........................................................2024A..............................................46H x 39W x 26D
Shipping .................................................................................................................Class 85
Crated dimensions ..........................2030A..............................................51H x 52W x 28D
.........................................................2024A..............................................51H x 46W x 28D
Machine weight ...............................2030A .......................................................475 pounds
.........................................................2024A .......................................................450 pounds
www.lionmachinery.com
LION OPEN THROAT CLEAT BENDER
WITH ON BOARD
COMPRESSOR
• Light weight • Turns drives on “L” shapes, pre-formed ducts and flats
• Table height designed to decrease operator fatigue
Mild steel capacity .....................................................................................................20 gauge and lighter
Bend length............................................2030A+ ..............................................3 inches to 29-1/4 inches
...............................................................2024A+ ...............................................3 inches to 23-1/4 inches
Bend width ................................................................................................................7/16 inch or 1/2 inch
Table height .................................................................................................................................36 inches
Table depth............................................................................................................................15-1/2 inches
Motor .....................................................2030A+. ......................................................1 HP 15 AMPS 110V
...............................................................2024A+......................................................3/4 HP 9 AMPS 110V
Machine color ....................................................................................................................................Black
Labor warranty ...............................................................................................................................30 days
Parts warranty ............................................................................................................................24 months
Machine dimensions .............................2030A+ ...........................................................46H x 45W x 26D
...............................................................2024A+ ...........................................................46H x 39W x 26D
Shipping .......................................................................................................................................Class 85
Crated dimensions ................................2030A+ ............................................................51H x 52W x 28D
...............................................................2024A+ ...........................................................51H x 46W x 28D
Machine weight .....................................2030A+ ....................................................................525 pounds
...............................................................2024A+ ....................................................................500 pounds
Lion A+ Pneumatically operated machine with on board air compressor
uses standard grounded three prong outlet.
It’s great to take to the job site!
Optional transformer available for 220V
LION BEADER
6016 Beader
When the job calls for heavy-duty giants, this machine
tool is it. With this 6016 Beader only one operator is
needed to produce SMACNA-approved beads 4 to 5
times faster than cross braking. It forms 5 beads on 12
centers, adjustable to 3/16” depth. Maximum capacity
is 16 gauge material and one operator can easily handle
sheets up to 60” wide.
Shipping (1600 lbs).................................................Class 85
www.lionmachinery.com
LION MANUAL DOUBLE SIDED CHEEKBENDERS
• Traditional Style • Beveled bars allow for sheet “spring back”
• Curved handles designed to decrease fatigue • For cheeks on square elbows and more!
Double Sided Operation ..............................................................................................................Front and/or Back
Bend Angle(s) .......................................................................................................................................1º to True 90º
Bend Width/Depth ..........................................................................................................................1/4 to 3/4 inches
Machine Color ..................................................................................................................................................Black
Mild Steel Capacity .........................................................2030D .................................................20 gauge or lighter
1824D .................................................18 gauge or lighter
Max Bend Length............................................................2030D..........................................................29-3/4 inches
1824D..........................................................23-3/4 inches
Machine Dimensions.......................................................2030D .............................................4 x 34 x 8-1/2 inches
1824D .............................................4 x 28 x 8-1/2 inches
Machine Weight...............................................................2030D...............................................................95 pounds
1824D...............................................................82 pounds
Labor Warranty .............................................................................................................................30 days
Parts Warranty ..........................................................................................................................24 months
Shipping ............................................................................UPS ground or LTL carrier of your choice
LION Machinery
182 Northwest Industrial Court
Bridgeton, Missouri 63044
PH: (314) 638-0100 ext: 353
Fax: (314) 373-6787
Email: [email protected]
www.lionmachinery.com