DATASHEET
NORDIC ID FA3030
The flat design of the Nordic ID FA3030 is ideal
for unobtrusive usage in retail environments.
This flat antenna has an unique radiation pattern
ensuring that the FA3030 can be mounted
directly on surfaces, even metal surfaces, without
compromising UHF RFID reading performance.
These thin and formfitting antennas are
typically used in smart shelves, smart cabinets,
commissioning and POS applications.
PRODUCT HIGHLIGHTS
UHF RFID
Frequency band
ETSI 865 – 868 MHz, FCC 902 – 928 MHz
Gain
3 dBic
Beam width (-3 dB)
60°
Polarization
RHCP
Input impedance
50 Ω
VSWR
< 1.5:1
Maximum input power
10W
Front-to-back ratio
23 dB
Connector
SMA Female connector (with 32 cm coaxial cable)
• Thin design that blends in well in different
environments
• Usable on all surfaces, including metal
• Consistently good reading performance
even when the tags are placed directly on
the surface
SUITABLE APPLICATION AREAS
• Smart shelves and cabinets
• Commissioning
• POS
SIZE AND WEIGHT
Dimensions
(W) 300 x (L) 300 x (H) 6 mm / (W) 11.8 x (L) 11.8 x (H) 0.2 inch
Weight
810 g / 28.6 oz
ENVIRONMENT
Operating Temperature
-20°C to 55°C
-4°F to 130°F
Storage Temperature
-40°C to 85°C
-40°F to 185°F
All information is subject to change without prior notice. Availability of product variants may vary regionally.
NORDIC ID FA3030
DATASHEET
ANTENNA RADIATION PATTERN
NORDIC ID FA3030
Phi = 0°, LHCP
0°
15 dB
NORDIC ID FA3030
Phi = 90°, LHCP
0°
10 dB
5 dB
0 dB
-5 dB
-10 dB
-15 dB
-20 dB
-25 dB
90°
270°
90°
180°
Theta
270°
180°
Theta
Theta 90
Phi 0
Phi 90
NORDIC ID HEADQUARTERS
Myllyojankatu 2 A
FI-24100 Salo
FINLAND
tel. +358 2 727 7700
fax +358 2 727 7720
[email protected]
www.nordicid.com
GERMANY
Nordic ID GmbH
Bielefeld, Germany
tel. +49 5206 70 84 70
fax +49 5206 70 847 10
[email protected]
www.nordicid.de
BENELUX
Alphen aan den Rijn
The Netherlands
tel. +31 172 233 097
fax +31 172 475 653
[email protected]
www.nordicid.nl
V1007