P240 POWER UNITS
LOWER OPERATING COSTS BY RAISING FUEL EFFICIENCY.
Painted with a fieldproven powder-coat paint
finish to protect against
fading and damage from
the outside elements.
Fuel costs are rising. Be ready with a more fuel-efficient
engine. Case IH P240 Power Units deliver optimum power
using less fuel.
All Case IH power units are Original Equipment
Manufacturer (OEM) designed, tested and manufactured,
and offer a combination of quality, value, availability and
warranty that few can match. The P240 Power Units meet
Tier 3 EPA, CARB & EU Emissions Standards.
P240 POWER UNIT GROSS POWER AND TORQUE
800
250
400
100
300
200
50
100
1400
1600
1800
2000
2200
Engine Speed (RPM)
horsepower
torque
0
Gross Fuel Consumption
BSFC (lb/hp-hr)
500
Gross Torque (lb-ft)
600
150
Gross Power (hp)
0.500
700
200
0
P240 POWER UNIT GROSS FUEL CONSUMPTION
0.400
0.300
0.200
0.100
0.000
1000 1200 1400 1600 1800 2000 2200
Engine Speed (RPM)
POWER UNITS
Your Case IH dealer can help you maintain your power unit
through regular oil changes and by performing the required
maintenance checks. You can also order OEM repair parts
for your power unit from your Case IH dealer.
CONTINUOUS HORSEPOWER RATINGS
Description
1,400
rpm
1,500
rpm
1,600
rpm
1,700
rpm
1,800
rpm
1,900
rpm
2,000
rpm
2,100
rpm
2,200
rpm
Rated Power
180 hp
(134 kW)
193 hp
(144 kW)
202 hp
(151 kW)
209 hp
(156 kW)
213 hp
(159 kW)
216 hp
(161 kW)
216 hp
(161 kW)
215 hp
(160 kW)
211 hp
(157 kW)
Rated Torque
673 lb-ft
(912 Nm)
677 lb-ft
(918 Nm)
665 lb-ft
(901 Nm)
646 lb-ft
(875 Nm)
621 lb-ft
(842 Nm)
595 lb-ft
(806 Nm)
568 lb-ft
(770 Nm)
537 lb-ft
(728 Nm)
504 lb-ft
(683 Nm)
P240 POWER UNIT SPECIFICATIONS
P240 POWER UNIT DIMENSIONS & WEIGHTS
Specifications
P240
Dimensions
P240
Engine Model
F4HE9684P*J102
Height to Top of Hood
57 in (1,448 mm)
6-cylinder diesel, in-line, 4-cycle,
turbocharged / charge air cooled
(with electronic controlled injection pump)
Overall Height
75 in (1,905 mm)
Engine Type
Height to PTO Shaft
20.25 in (514 mm)
Engine Displacement
411 cu in (6.7 liters)
Skid Width
36.1 in (918 mm)
Bore and Stroke
4.09 × 5.20 in (104 × 132 mm)
Overall Width
36.1 in (918 mm)
Compression Ratio
16.5:1
Skid Length
65 in (1,651 mm)
Governor Breakaway
2,235 rpm +/- 25 rpm
Overall Length
79.5 in (2,019 mm)
Governor Regulation
5% +/- 1%
Diameter of PTO Shaft
2.5 in (64 mm)
2,350 rpm (+/- 50 rpm) /
900 rpm (+/- 50 rpm)
Weights
P240
High / Low Idle Speed
With PTO w/ Rear Hood
1,759 lbs (798 kg)
Nominal Max Torque
752 lb-ft (1,020 Nm) @ 1,500 rpm
With PTO w/out Rear Hood
1,688 lbs (766 kg)
Altitude Capacity
6,550 ft (2,000 m)
W/out PTO w/ Rear Hood
1,679 lbs (762 kg)
Alternator
14-volt, 90-amp
W/out PTO w/out Rear Hood
1,608 lbs (729 kg)
SIDE VIEW
FRONT VIEW
57 in
(1,448 mm)
75 in
(1,905 mm)
79.5 in (2,019 mm)
20.25 in
(514 mm)
65 in (1,651 mm)
36.1 in
(918 mm)
P240 POWER UNIT PART NUMBERS
Unit
P240 Part Number
With PTO w/ Rear Hood
84126039
With PTO w/out Rear Hood
84126040
W/out PTO w/ Rear Hood
84604469
W/out PTO w/out Rear Hood
84604470
P240 POWER UNIT STANDARD FEATURES (FACTORY-INSTALLED)
Features
P240
2-Stage Air Cleaner
•
Air Cleaner Restriction Indicator
•
Steel Battery Tray
•
Belt Guards
•
Curved Exhaust Pipe
•
Engine Lifting Brackets
•
Engine Sub Base
•
Side-Mounted, Rodent-Proof Control Panel with Full Gauge Package Includes:
– Oil Pressure Gauge w/ Low-Pressure Shutdown
•
– Coolant Temperature Gauge w/ High-Temperature Shutdown
•
– Volt Meter
•
– Key Switch
•
– Emergency Stop Button
•
– Tachometer w/ Hour Meter
•
– Push Button Toggle Switch Speed Control
•
– Latching Instrument Panel Cover
•
Low Coolant Level Shutdown
•
Radiator Shroud
•
Radiator w/ Deaeration Tank
•
Sheet Metal Housing w/ Forward Hood
•
Starter: 12-Volt
•
Push Button Toggle Switch Throttle Control
•
Low-Oil Level Shutdown
•
90-Amp Alternator
•
Standard low-oil
level shutdown.
Optional – factory installed
front crankshaft pulley
(Double “A” Groove – 87298705
or Double “B” Groove – 47460584)
ADDITIONAL PARTS AVAILABLE (DEALER-INSTALLED ACCESSORIES)
Features
P240 Part Number
Driveshaft
73340125
Drive Hub
73340123
BMF31GW (US)
CCMF31GW (CAN)
Battery 950CCA
Double “A” Groove Crankshaft Pulley (1/2 in wide belt)
4897928
Double “B” Groove Crankshaft Pulley (5/8 in wide belt)
47460584
PTO
1998868C1
Rear Hood
84394556
Battery Cables (Includes One Positive and One Negative Cable)
87299127
Negative Battery Cable
87745688
Positive Battery Cable
87745689
ALLOWABLE SIDE-PULL LOADS – FOR STANDARD POWER TAKE OFFS
The following general information should be used for determining the actual applied load:
L=
126,000 × HP
N×D
Where:
L = Actual applied load (lbs)
N = Shaft speed (rev/min)
D = Pitch dia. of sheave (in)
F = Load factor
SIDE VIEW OF PTO
×F
Centerline
of Side Load
1.0 For chain or gear drive
2.5 For all v-belt drives
3.5 For flat bed
NOTE: If the PTO is driving a large-inertia load
or high-shock application, multiply the load by two.
Maximum Allowable Side Load (lbs)
Distance of “X” Value Above
Clutch Size
rpm
1 in
2 in
3 in
4 in
5 in
11.5 in 2 Plates
1,000
4,540
3,395
2,710
2,555
1,930
11.5 in 2 Plates
1,200
4,370
3,395
2,710
2,555
1,930
11.5 in 2 Plates
1,800
3,900
3,395
2,710
2,555
1,930
11.5 in 2 Plates
2,400
3,550
3,330
2,710
2,555
1,930
NOTE: Actual applied load must be less that the maximum allowable side load.
WARRANTY: 2-year/2,000 hours (whichever occurs first)
SOLD AND SERVICED BY:
PM-16909 10/2013 (Replaces: PM-15289)
©2014 CNH Industrial America LLC. All rights reserved. Case IH and CASE are registered trademarks in the United States and many other
countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. www.caseih.com www.CaseCE.com