With the compliments of:
Swiss made
Catalogue 2006 / Art.-Nr. 9880050GB
Swiss made
Manufacturer:
Lamello Ltd
Joining Technology
Hauptstrasse 149
CH-4416 Bubendorf
Tel. +41 (0)61 935 36 36
Fax +41 (0)61 935 36 06
www.lamello.com
[email protected]
Catalogue
www.lamello.com
valid from 01.2006
Notes
Not all items shown in this catalogue are available in all countries. Please inquire with your local Lamello supplier.
We reserve the right to change the design of our products without prior notice.
41
Synonym for
Wood joining technology
Lamello not only offers biscuit joiners and joining elements for the highest quality
demands, but integrated problem solutions, too.
Special
Power T
Tools
ools
Glueing Systems
INVIS Joining
Systems
Service
Wood
W
ood Repair
Systems
Training
T
raining
Wood
W
ood Joining
Systems
Delivery &
Application Support
Systems Consulting
Application Consulting
The current product spectrum consists of 5 business units and a customer oriented
consultancy and service program:
With this extensive product range, Lamello offers convincing, carefully thought out
and cost-effective solutions that include joining, gluing, repairing and precision
milling for the wood industry.
INVIS invisible, detachable joining
The possibilities are endless with INVIS. Find out about this revolutionary system
by ordering our complete package from our website www.lamello.com
Lamello – Visions,
Ingenuity and
Customer Service
For more than 60 years, the name of Lamello has stood for innovative joining
systems, reliability, precision, simplicity and longevity of professional power tools
and complete system solutions.
In 1955, on a cold, rainy December day, the master carpenter Hermann Steiner,
had a vision – a new joining system.
Hermann Steiner
1913 - 2005
As a result of outstanding effort and inventiveness, the worldwide known Lamello
joining system of today was developed from this vision in an impressive way.
Through constant improvement and further development of our products and work
processes, an internationally active industrial manufacturer of high-quality system
solutions has developed from a single carpenter‘s workshop over the years.
As a pioneer with unique “know-how“ in joining technology, we pick up customers’ problems in the field of mechanical joining technology and related fields.
1. biscuit joiner Prototype,
1968
■
Develop, Produce and Market, high-quality top solutions
■
Our solutions stand out thanks to innovative flexibility in design and use,
high productivity and cost effectiveness
Day to day, our motivated and qualified staff along with our sales partners
make great effort to realise our mission.
“We like acquiring and supporting satisfied customers time and again because
satisfied customers are the best prerequisite for good cooperation.“
Top 20 S3 biscuit joiner,
2005
(quotation from Herman Steiner)
Top Quality
is our Priority
Lamello products offer you:
Swiss made for quality, precision and longlife ■ Innovative functions with simple operation
parts availability guarantee ■ Complete systems from one source
■
■
10-year spare
Top quality has absolute priority for Lamello from the development, production,
procurement and assembly up to the final inspection of every single product.
Through the application of modern computer-assisted technology our experienced employees develop and optimise innovative power tools according to our
customers’ requirements – the professionals.
Almost all of the components of our high-quality power tools are manufactured
or finished at the Lamello factory in Bubendorf (Switzerland) in order to meet the
well-known Lamello quality and precision standards.
www.lamello.com
Our precision casted parts are milled and machined for crucial dimensional accuracy and long serviceable life. Hence, our base plates are unique in precision
and ruggedness.
The longevity of our products and service support is legendary and much valued
such as our commitment of supply for spare parts for at least 10 years.
All Lamello products are consistently oriented to the needs of the professional
users. Innovative functions and simple operation ensure ease of use combined
with the highest degree of customer benefits.
The Lamello system quality guarantees that every system component matches
the other component perfectly, rendering the reliable advantage of a “one stop
shopping“.
Table of contents
Lamello wood joining system
Biscuit joiner
Joining elements
Glue bottles
Clamping equipment
Cutting tools
Accessories
Spare parts
Lamello wood repair system
12-13
Grooving machine
13
Patch making machine
14
Knot patch router
15-16
Minispot patches
17
Knot patches
14
Flush milling machine
31
Cutting tools
35-37
Spare parts
Lamello special power tools
Multipurpose cutter
Flush milling machine
Laminate trimmer
Edge milling machine
Cutting tools
Accessories
Spare parts
21
18
19
20
32-33
32-33
35-37
Lamello LK gluing system
Glue applicator
Glue pistol
Nozzle
PUR glue system
Accessories
Spare parts
22
22-23
24-25
27
26
26
Miscellaneous products
Worktop jigs
Moisture meters
28
28
Lamello cutting tools, accessories & spare parts
Cutting tools
Suction accessories
Accessories
Survey of spare parts
Survey of motors and
carbon brushes
Survey of tools
Remarks
6-7
8-9
10-11
11
30
30
35-37
30-34
29
30-33
35-37
38
39
41
6 unequalled advantages of the Lamello Wood Joining System
1. Simple
· Easy & fast positioning to pencil mark
· No additional stops and positioning aids required
· Lateral positioning tolerance for cutting to pencil mark
2. Fast
·
·
·
·
Shortest cutting time per joint
No tool changes necessary
Simply one depth adjuster for 8 different joining elements
Shortest adjustment time (simply adjusting joining element type and
cutting groove to pencil mark)
3. Precise
· Maintaining groove tolerances for entire life of cutting tool
(no danger of deflection)
· Highest precision even at very fast working speeds
· Clean and precise groove quality even without dust extraction
4. Cost effective
· Lowest maintenance costs throughout entire life of machine
· Cost-effective joining elements
· Tool maintenance comprises one cutting tool only (sharpening and
replacement)
5. System solution
· All system components from one source only …
”where one part matches the other”….
· Top precision biscuit joiner, suitable glue applicators, perfect joining
elements and clamping sets
6. More versatile
Wood repairs
Cutting of shadow joints
For special fitting applications
Trimming of protruding
edges
5
Wood joining system / Biscuit joiner
Art.-No.
Top 20 S3
L43 S3, 600 W, Full-wave electronic, 10‘000 RPM
The original biscuit joiner with height adjustment from the inventor of biscuit joiners. The ultimate biscuit joiner for quality
performance. Choose Lamello for precision, reliability, longevity and many other benefits,
Step Memory SystemTM
· High precision guidance for perfect fitting accuracy
· Height adjustable cutter, Step Memory SystemTM
- Scale +/- 2 mm, in steps of 0.1 mm
- Adjust groove position to exact center of the work-piece
(from 8-24 mm material thikness)
- Simple preparation of joints even with projecting or
rejecting areas
- Shadow joints (adjustable from 8 to 12 mm)
· Electronic motor with speed regulation
· Multifunctional stop square
- Qutside flush mitre joints
- Attach the fence to the bottom of the cassette for a large
and safe working surface while inverted
· Depth adjuster with 6 preset cutting depth
· Swivelling front stop 0-90°, detends at 22.5°, 45°, 67.5°
· Central locking system for the easy cutter changment
· Extra thin anti-slip pads
· Dust bag + adapter Ø 36 mm
· Precision cutter T6 with scoring teeth
· Additional uses* (see therefor on the right hand side)
101053
Biscuit joiner Top 20 S3 with handmade wooden case
101053S
Biscuit joiner Top 20 S3 with Systainer
Cutting tools and accessories
Spare parts
6
page
page
30
35-37
Wood joining system / Biscuit joiner
Art.-No.
Classic C3
L46, 705 W, 10‘000 RPM
The original biscuit joiner that is affordable for every workshop. Choose Lamello for precision, reliability, longevity and
many other benefits,
· High precision guidance for perfect fitting accuracy
· Multifunctional stop square
- Qutside flush mitre joints
- Attach the fence to the bottom of the cassette for a large
and safe working surface while inverted
· Depth adjuster with 6 preset cutting depth
· Swivelling front stop 0-90°, detends at 22.5°, 45°, 67.5°
· Central locking system for the easy cutter changment
· Extra thin anti-slip pads
· HW cutter T6 with alternating teeth
· Additional uses* (see below)
Biscuit joiner Classic C3 with handmade wooden case
101252
Biscuit joiner Classic C3 with Systainer
101252S
Biscuit joiner Classic C3 with cardboard box
101252K
Special accessories:
Dust bag + adapter Ø 36 mm
257530
Extractor stub (Festool compatible)
331007
* Additional uses of the Lamello biscuit joiners: Accessorie page 30
For patching wood defects (Minispot cutter as
special accessory)
Size 2 + 8
For cutting shadow
joints (Saw blades and
slide shoe as special
accessories)
For special fitting applications (Duplex hinges)
For trimming of projecting wooden and plastic
edges (Lamello Nova as
special accessory)
7
Wood joining system / Joining elements
Art.-No.
1
1
22
33
Nothing but the original Swiss Quality
1 Smooth sanded edges for easy handling and insertation
2 Raised guide rails for perfect fitting accuracy
3 Recessed & embossed glue surface for accurate glue distribution and superior tear-out strength
Wooden Lamello plates, box of 1000 pieces
For cutter Ø 100 x 4 mm
Size
Size
Size
Size
Size
20
10
0
S4
S6
56 x 23 x 4 mm
53 x 19 x 4 mm
47 x 15 x 4 mm
67 x 21 x 4 mm
85 x 30 x 4 mm
144020
144010
144000
144004
144006
For cutter Ø 78 x 3 mm
Size
H9
38 x 12 x 3 mm
144009
Wooden Lamello plates, assorted
For cutter Ø 100 x 4 mm
Size 20/10/0 assorted 1000 pcs. (500, 250, 250 pieces)
Size 20/10/0 assorted 400 pcs. (240, 80, 80 pieces)
144030
144032
Wooden Lamello plates, practical blister packaging
Size
20
56 x 23 x 4 mm
Blister of 80 pieces
144520
Size
10
53 x 19 x 4 mm
Blister of 80 pieces
144510
Size
0
47 x 15 x 4 mm
Blister of 80 pieces
144500
Size
S6
85 x 30 x 4 mm
Blister of 40 pieces
144506
Size
H9
38 x 12 x 3 mm
Blister of 250 pieces
144509
For special sizes, please ask for the complete summery.
Lamello Fibro
�1
2
�
�3
1 Glue-in groove for controlled swelling
2 Specific wood fiber material:
- is not sensitive to humidity
- tight tolerance band on thickness = 4 mm
3 Eased edges for easily inserts into the groove
Lamello Fibro 20 56 x 23 x 4 mm
8
Fibro 20, box of 1000 pieces
144420
Fibro 20, blister of 80 pieces
144620
Wood joining system / Joining elements
Art.-No.
Clamping plate K20
Fitting aid for workpieces difficult to clamp, e.g. screens,
crown moulding etc. Is used in combination with wooden
Lamello plates.
Made of plastic, barbed crossribs
Box of 250 pieces
Blister of 80 pieces
60 x 24 x 4,5 mm
60 x 24 x 4,5 mm
145000
145001
Plate C20
For joining solid surface materials such as Corian®, Varicor®
etc. Made of translucent plastic
Box of
250 pieces
60 x 23 x 4 mm
145010
Simplex
Detachable 2 parts joining elements for ceiling panels,
screens, shelves and general casegoods. Install with insertion
tool and 2 part epoxy adhesive
Made of aluminum
Box of
Box of
100 pairs
50 pairs
54 x 23 x 4.1 mm
54 x 23 x 4.1 mm
Inserting tool for Simplex
For accurate positioning of Simplex
166100
166101
166110
Duplex
2-piece detachable hinges
Nickel plated
Nickel plated
Nickel plated
20 pieces left
20 pieces right
10 pieces each, left and right
166011
166012
166013
Black
Black
Black
20 pieces lef
20 pieces right
10 pieces each, left and right
166021
166022
166023
Brass
Brass
Brass
20 pieces left
20 pieces right
10 pieces each, left and right
166001
166002
166003
9
Wood joining system / Glue applicators
Art.-No.
For biscuit and dowel joints the Lamello glue applicators apply
the glue in the best possible way, i.e. laterally. The results are
high strength wood joints, no glue spillage or any undesired
accumulation in the bottom.
Dosicol
The handy glue applicator with an adjustable metering pump
· One stroke glue application
· The volume is freely adjusted by the metering ring
· Accurate dispensing, optimal for biscuit and dowel joints
· Available in 4 different models
Dosicol Mod. 20, for Lamello grooves size 20 and 10
177000
Dosicol Mod. 2, for Minispot recesses size 2 and 22
Dosicol Mod. 4, for Minispot recesses size 4
177002
177004
Dosicol Mod. D, for dowel holes Ø 8, 10, 12 mm
177007
Nozzles for Dosicol:
Nozzle for Lamello grooves size 20 and 10
Nozzle for Minispot recesses size 2 and 22
Nozzle for Minispot recesses size 4
Nozzle for Minispot recesses size 20
Nozzle for dowel holes Ø 8, 10, 12 mm
287020
287022
287024
512891
287027
Spare parts Dosicol:
Glue bottle with metering pump
Metering pump complete
Cap for glue bottle
Base
Water container
287012
287013
337001
287010
337040
Minicol
The all purpose glue applicator with sturdy bottle stand in
solid wood
· Nozzle facing downwards in stand for quick use
· Bottle stand prevents glue from drying up in nozzle
10
Minicol Mod. KS, with plastic nozzle
Minicol Mod. M, with metal nozzle
175500
175550
Nozzles for Minicol and Servicol:
Plastic nozzle
Metal nozzle
Pointed nozzle
Metal nozzle for plates size 9
335511
285512
335522
285509
Spare parts Minicol
Glue bottle
Base
335510
285515
Wood joining system / Glue applicators
Clamping set
Art.-No.
Servicol
All purpose glue applicator with simple holder
· Nozzle facing downwards in stand for quick use
· Bottle stand prevents glue from drying up in nozzle
Servicol Mod. KS, with plastic nozzle
Servicol Mod. M, with metal nozzle
Servicol Mod. X, with pointed nozzle
175560
175570
175580
Spare parts Servicol:
Glue bottle
Base
335510
335513
Nozzles for Minicol and Servicol:
Plastic nozzle
Metal nozzle
Pointed nozzle
Metal nozzle for plates size 9
335511
285512
335522
285509
Clamping Set
175020
Easy clamping system for gluing case work, drawers,
frames, wall and floor panels. In 3 parts:
· 1 pair of clamps with 8 m (8,7 yd.) belt
· 4 profile sections, length 60 cm (0,65 yd.), aluminum
· 1 pair of tension hooks
Spare parts Clamping Set:
Clamps with 5 m (5,5 yd.) polyester belt, pair
Clamps with 8 m (8,7 yd.) polyester belt, pair
Clamps with 10 m (11 yd.) polyester belt, pair
Buckle for clamps, single, without belt
Polyester belt for clamps, reel of 50 m
Tension hooks, pair
Profile sections, length 12 cm, set of 4 pieces
Profile sections, length 40 cm, set of 4 pieces
Profile sections, length 60 cm, set of 4 pieces
175005
175008
175010
175060
175050
175200
175401
175402
175403
Profile sections with special lenght on request
11
Wood repair system / Machines
For repairing wood defects such as resin-galls, cracks,
small spikes, damaged edges e.g.
Art.-No.
· Excellent self-locking for clean fit
· Smaller profile section for “invisible“ reparations
· Perfect results due highest Minispot quality
Minispot G20 S2
L62, 1000 W, 10‘000 RPM
111750
To cut Minispot-grooves for patches size 2,4,22,8,15,20
· Easy positioning thanks glass cover
· Anti-slide coating prevents from slipping while milling
· Controlled diving-in due to ergonomic push-down lever
· Without cutter
· Handmade wooden case
Milling jig for Minispot patching rods 85/ 250/ 500 mm
For G20/ G20 S2/ G2A/ G22
121702
Stop square for edge patches for G20 S2
To cut Minispot-grooves in the edge regions
(Applicable on G20 S2 from the year of manufacture 2005)
121755
Edge patches
Cutting tools
12
page
page
16
31
Wood repair system / Machines
Art.-No.
Minispot G2A
L46, 705 W, 10‘000 RPM
111702
To cut Minispot-grooves for patches size 2 and 8
· High precision guidance
· Easy positioning thanks glass cover
· Anti-slide coating prevents from slipping while milling
· Removable bottom cover, for milling in rabbets
· HW-cutter 100 x 8 x 22 mm, size 2
· Handmade wooden case
Patchmaker
L51, 500 W, RPM 25‘000 / D7640H, 250 W, 18‘000 RPM
111600
For the manufacture of individual size 2 patches, using your
own wood scraps (72 x 25 x 10 mm)
· Every patch has the same surface structure and color shade
as the work piece
· The patch is immediately available
· Suction stubs on both motors
· HW-Profile cutter und HW saw blade
Profile cutter
Saw blades
page
page
33
31-32
13
Wood repair system / Machines
Art.-No.
Perfora E
L50, 520 W, 31‘000 RPM
111970
Milling of circular recesses
· Milling jig for Ø 10, 15, 20, 25, 30 mm
· Milling jig with non-slip coating and removable fixing pins
· Mill all diameters without changing tool
· Precise milling at the edge regions also with a missing
center
· Suction hose (3 m) with connector
· End-milling cutter HW Ø 10 x 15 mm
Plano 45 S2 (L60, 1000 W)
L60, 1000 W, 10‘000 RPM
111851
To flush-mill projecting wood parts such as resin-gall patches, patching rods, knots, crossbar patches
· Special milling geometry facilitates pulling cut for tear-free
work.
· Milling height set easily in steps of 0.035 mm, +/- 0.7 mm
· Cutter head with 3 HW-reversing blades
· Suction stub
· Handmade wooden case
tear-free cut
End milling cutter
HW-reversing blades
14
adjustable milling
height
page
page
33
33
Wood repair system / Minispot patches
Profile
Kind of wood
Spruce-fir¹
Pine¹
Spruce nat.²
Nordic spruce³
Nordic pine³
Obeche
Maple
Beech nat.
Larch
Lime
Poplar
Silver fir
Stone pine
Birch
Pear-tree
Brazil mahogany
Beech
Carolina pine
Alder
Ash
Framiré
Hemlock
Iroko
Chestnut
Larch nat.
Larch siberian
Mahogany
Merbau
Ramin
Red Cedar
Red alder
Sapelli
Sipo
Elm
Douglas fir
Oak
Cherry-tree
Meranti
Ponderosa pine
Red oak
White oak
Walnut-tree
Teak
Size
Width
mm
Height
mm
Length
mm
Quantity
per box
2
8
13
69
500
22
15
13
69
200
4
15
20
81
200
8
8
11
64
500
15
15
11
64
220
20
20
11
65
160
¹ mixed, smooth/ coarsely ringed
² comb-grained/ closely ringed/ light
³ coarsely ringed/ light
Art.-No.
Size 2
Art.-No.
Size 22
Art.-No.
Size 4
Art.-No.
Size 8
Art.-No.
Size 15
Art.-No.
Size 20
15 0002
15 0302
15 0102
15 0202
15 0402
15 0502
15 0602
15 0702
15 0802
15 0902
15 1002
15 1102
15 1202
15 1302
15 1402
15 1502
15 1602
15 1702
15 1802
15 1902
15 2002
15 2102
15 2202
15 2302
15 4602
15 5202
15 2502
15 3802
15 2602
15 3902
15 4102
15 2702
15 4302
15 2802
15 2902
15 3002
15 3102
15 3202
15 3302
15 3402
15 4202
15 3502
15 3602
15 0022
15 0322
15 0122
15 0222
15 0422
15 0522
15 0622
15 0722
15 0822
15 0922
15 1022
15 1122
15 1222
15 1322
15 1422
15 1522
15 1622
15 1722
15 1822
15 1922
15 2022
15 2122
15 2222
15 2322
15 4622
15 5222
15 2522
15 3822
15 2622
15 3922
15 4122
15 2722
15 4322
15 2822
15 2922
15 3022
15 3122
15 3222
15 3322
15 3422
15 4222
15 3522
15 3622
15 0004
15 0304
15 0104
15 0204
15 0404
15 0504
15 0604
15 0704
15 0804
15 0904
15 1004
15 1104
15 1204
15 1304
15 1404
15 1504
15 1604
15 1704
15 1804
15 1904
15 2004
15 2104
15 2204
15 2304
15 4604
15 5204
15 2504
15 3804
15 2604
15 3904
15 4104
15 2704
15 4304
15 2804
15 2904
15 3004
15 3104
15 3204
15 3304
15 3404
15 4204
15 3504
15 3604
15 0008
15 0308
15 0108
15 0208
15 0408
15 0508
15 0608
15 0708
15 0808
15 0908
15 1008
15 1108
15 1208
15 1308
15 1408
15 1508
15 1608
15 1708
15 1808
15 1908
15 2008
15 2108
15 2208
15 2308
15 4608
15 5208
15 2508
15 3808
15 2608
15 3908
15 4108
15 2708
15 4308
15 2808
15 2908
15 3008
15 3108
15 3208
15 3308
15 3408
15 4208
15 3508
15 3608
15 0015
15 0315
15 0115
15 0215
15 0415
15 0515
15 0615
15 0715
15 0815
15 0915
15 1015
15 1115
15 1215
15 1315
15 1415
15 1515
15 1615
15 1715
15 1815
15 1915
15 2015
15 2115
15 2215
15 2315
15 4615
15 5215
15 2515
15 3815
15 2615
15 3915
15 4115
15 2715
15 4315
15 2815
15 2915
15 3015
15 3115
15 3215
15 3315
15 3415
15 4215
15 3515
15 3615
15 0020
15 0320
15 0120
15 0220
15 0420
15 0520
15 0620
15 0720
15 0820
15 0920
15 1020
15 1120
15 1220
15 1320
15 1420
15 1520
15 1620
15 1720
15 1820
15 1920
15 2020
15 2120
15 2220
15 2320
15 4620
15 5220
15 2520
15 3820
15 2620
15 3920
15 4120
15 2720
15 4320
15 2820
15 2920
15 3020
15 3120
15 3220
15 3320
15 3420
15 4220
15 3520
15 3620
Other wood species in the different sizes are available on request.
15
Wood repair system / Minispot patches
Art.-No.
Minispot Multibox
156580
Minispot patches assorted, 12 x 50 pieces size 2,
of the following species:
Beech, oak, ash, spruce-fir, pine, hemlock, cherry-tree, larch,
mahogany, walnut-tree, sapelli, silver fir
Minispot patches in small packs
on request
Minispot Jumbo-Box
Spruce-fir size 2
Spruce-fir size 20
Spruce-fir size 4
1500 pieces
500 pieces
400 pieces
150002J
150020J
150004J
Pine size 2
Pine size 20
Pine size 4
1500 pieces
500 pieces
400 pieces
150302J
150320J
150304J
Larch size 2
Larch size 20
Larch size 4
1500 pieces
500 pieces
400 pieces
150802J
150820J
150804J
Minispot patching rods
Lenght 85 mm*
Spruce-fir size 2
Spruce-fir size 20
500 pieces
220 pieces
150002L08
150020L08
Larch size 2
Larch size 20
100 pieces
220 pieces
150802L08
150820L08
Lenght 250 mm*
Spruce-fir size 2
Spruce-fir size 20
100 pieces
45 pieces
150002L25
150020L25
Larch size 2
Larch size 20
100 pieces
45 pieces
150802L25
150820L25
Lenght 500 mm*
Spruce-fir size 2
Spruce-fir size 20
100 pieces
45 pieces
150002L50
150020L50
Larch size 2
Larch size 20
100 pieces
45 pieces
150802L50
150820L50
* Nominal length = Traverse path
Minispot edge patches size 20
Spruce
Larch
Beech
55 pieces
55 pieces
55 pieces
Other wood species are available on request.
16
150023
150823
150723
Wood repair system / Knot patches
Art.-No.
Knot patches
Spruce
Spruce
Spruce
Spruce
Spruce
Spruce
Ø 10 mm
Ø 15 mm
Ø 20 mm
Ø 25 mm
Ø 30 mm
Ø 35 mm
250 pieces
250 pieces
250 pieces
250 pieces
250 pieces
250 pieces
157010
157015
157020
157025
157030
157035
Pine
Pine
Pine
Pine
Pine
Pine
Ø 10 mm
Ø 15 mm
Ø 20 mm
Ø 25 mm
Ø 30 mm
Ø 35 mm
250 pieces
250 pieces
250 pieces
250 pieces
250 pieces
250 pieces
157110
157115
157120
157125
157130
157135
Larch
Larch
Larch
Larch
Larch
Larch
Ø 10 mm
Ø 15 mm
Ø 20 mm
Ø 25 mm
Ø 30 mm
Ø 35 mm
250 pieces
250 pieces
250 pieces
250 pieces
250 pieces
250 pieces
157210
157215
157220
157225
157230
157235
Oak
Oak
Oak
Oak
Oak
Oak
Ø 10 mm
Ø 15 mm
Ø 20 mm
Ø 25 mm
Ø 30 mm
Ø 35 mm
250 pieces
250 pieces
250 pieces
250 pieces
250 pieces
250 pieces
157310
157315
157320
157325
157330
157335
Knot patches assorted
Ø 10 mm 100 pieces Ø 15 mm 100 pieces
Ø 20 mm 150 pieces Ø 25 mm 100 pieces
Ø 30 mm 50 pieces
Spruce
Pine
Larch
Oak
Birch
assorted
assorted
assorted
assorted
assorted
500 pieces
500 pieces
500 pieces
500 pieces
500 pieces
157050
157150
157250
157350
157450
Crossbar pin
Spruce
Spruce
Spruce
Spruce
Spruce
Spruce
Spruce
Ø 15 mm
Ø 20 mm
Ø 25 mm
Ø 30 mm
Ø 35 mm
Ø 40 mm
Ø 50 mm
box of 1 kg
box of 1 kg
box of 1 kg
box of 1 kg
box of 1 kg
box of 1 kg
box of 1 kg
157015Q
157020Q
157025Q
157030Q
157035Q
157040Q
157050Q
Larch
Larch
Larch
Larch
Larch
Ø 15 mm
Ø 20 mm
Ø 25 mm
Ø 30 mm
Ø 35 mm
box of 1 kg
box of 1 kg
box of 1 kg
box of 1 kg
box of 1 kg
157215Q
157220Q
157225Q
157230Q
157235Q
Other wood species are available on request.
17
Special power tools
Art.-No.
Cantex Ergo
L63, 1000 W, 10‘000 RPM
111857
The flush milling machines of the highest quality standard.
To flush-mill solid wooden edges and projecting wood parts
such as resin-gall patches, patching rods, knots, crossbar
patches
· Special helical milling geometry facilitates “pulling” cut
(shearing cut), guaranteed tear-free work
· Low cutting pressure, no chipping at the end of the edge
· Perfect cut even on crossgrained wood
· Milling height set easily in steps of 0.035 mm, +/- 0,7 mm
· Ergonomically improved and repositioned switches and grips
· Special coating of the supporting plate (Standard) provides
an optimized sliding
· Swivel vaccum stub for a flexible dust ejection and easy
handling
· Detachable nylon platen-gib for projecting edges
· Cutter head with 3 HW-Reversing blades, easy and
accurate knife changes without a setting gauge,
cost-effective tool usage thanks to long life
· Cutting width 45 mm, cutting height 3 mm
· Handmade wooden case
Parallel guide stop for Cantex Ergo/S2
For efficent flush milling of edge bands on materials with
synthetic resin surface (i.e. melamines, HPL and laminates)
121290
· Special coated base plate avoid wipe marks on the work
piece
· With a quick set stop and a micro adjustment
Cantex Ergo + Parallel guide stop
HW-reversing blades
18
111858
page
33
Special power tools
Art.-No.
Lamina
For chip-free and precise flush or chamfer cutting of plastic
laminates, wood veneers, non-ferrous metals and most composite materials
· Climb cutting guarantee chip-free and clean cutting
· Despite macimum hand feeding capabilities there is no
post-processing necessary due the perfect cut
· Quick and easy set up for 90°-flush and chamfer milling
· Cutting depth at 90° = 3 mm, at 35° = 4 mm
· Slight cutting width effects longer durability of the cutter
· No damage to the work-piece surface due the exchangable
base plate made in plastic
· Square stop for flush cutting of edge bandings
· HW-Cutter Ø = 30 mm 35° (optional 22° + 45°)
· Handmade wooden case
Lamina E2 with electronic motor
L56, 300 W, 28‘000 RPM
111990
Lamina P2 with pneumatic motor
P50, 400 W, 21‘000 RPM,
air consumption 500-600 l/Min
111995
90°
35°
3 S Pa shadow jointer + parquet cutter
L47, 705 W, 10‘000 RPM
111430
For cutting shadow joints and parquet
· Cutting depth adjustable 0 – 30 mm
· Standard joint width 8 mm (with plastic inlay 3 mm)
· Joint width 10 + 12 mm (with plastic inlay 5 + 7 mm)
(without flange for joint widths 12, 14, 16 mm)
· Plastic-Front stop for smooth gliding at the ceiling
· HW-saw blade Z20, with flange 4 mm, 120 x 2,4 x 22 mm
· Handmade wooden case
Saw blades
Form cutter
page
page
31
33
19
Special power tools
Art.-No.
Profila
For flush milling, edge milling and chamfering of edge
bands and edges, even on curved workpieces
· Easy adjustment of the cutting depth through simple turning of the guiding plate
· Accurate milling qualitiy due high motor speed
· Large base plate Ø 100 mm
· Small, variable center opening for the tool (34 or 25 mm)
· Special coated base plate avoid wipe marks on the work
piece
· HW-Edge cutter r = 3 mm
· Collet chucks 6 + 8 mm
Profila E with electric motor
L50, 520 W, 31‘000 RPM
111961
Profila P with pneumatic motor
P50, 400 W, 21‘000 RPM,
Air consumption 500-600 l/Min
111953
Profila E special with electric motor
For treating of projecting PVC edges
111962
Base plate Ø – 100 mm for Profila E
121983
Base plate with gap for projecting PVC edges for Profila E
121982
Cutter
20
page
33
Special power tools
Art.-No.
Tanga Delta S2
L73, 1600 W, 7‘700 RPM (230 V)
111553
Our new multi-purpose machine IS the ideal machine for
window replacement or renovation. Cutting through stucco,
plaster, stone or tile is made easy with a Lamello machine
designed for the complete job.
· 1600 Watt with electronical overload protection
· Front plates for the straight cut and 45° cut into the angles
exchangeable with quick-release fastener .
· Durable precise long life guide due to dust wiper
· Diamond blade for cutting plaster, stone and tiles
· Rollers on front ruler for improved sliding action
· Cutting depth 0-58 mm continuously adjustable
· Cutting height 6 mm (groove width 6 mm)
· Suction stub and 4 suction hose
· Maxi-Systainer
Tanga Delta H
L73, 1600 W, 7‘700 RPM (230 V)
111560
The ideal machine for window renovation. The mulitpurpose
cutter powertool.
· 1600 Watt with electronical overload protection
· Durable precise long life guide due to dust wiper
· Cutting depth 0-68 mm continuously adjustable
· Cutting height 6 mm (groove width 6 mm)
· Base plate with snap-in locker for a quick change of toolsl
· Suction stub and 4 m suction hose
· HW-Saw blade T12, 200 x 2,4 x 22 mm
· Handmade wooden case
Diamond blade, saw blades
Rabbet stop
page
page
32
32
21
Gluing system / Glue applicators, Glue pistols
For an efficent, optimized glue application on egdes, surfaces, joints and profiles.
Art.-No.
· Immediately ready for use
· Simple oparation and application
· Efficent, precise, economical and meterable glue
application
· Flexible extensible
Glue applicator for water soluble glues
· Stainless steel pressure tank (longevity guarantee)
· Minimal cleaning required only
· Pressurize only once to process the whole glue quantity
(10, 5, 3 kg)
· Pressure gauge and safety valve
· Inner plastic glue container
· Water container for glue pistol
· Hose Ø 10 mm, length 4 m
· Glue pistol LK 0
· Pointed nozzle for fine glue application
· Pump hose
LK 3
(3 kg)
502003
LK 5
(5 kg)
502005
LK 10 (10 kg)
502010
LK 0 Glue pistol
512200
For manual operation
· Variable glue flow quantity
· Drip proof, very service friendly
· Bayonet joint for rapid nozzle change within seconds
· Made of high quality industrial plastic and stainless steel
LK 100 Glue pistol pneumatic
For pneumatic operation
· Variable glue flow quantity
· Drip proof, very service friendly
· Bayonet joint for rapid nozzle change within seconds
· Made of high quality industrial plastic and stainless steel
· For external pneumatic control
22
512210
Gluing system / Glue pistols
Art.-No.
LK-110 Glue pistol pneumatic
With control of quantity per impulse, release at the pistol
· Required glue quantity can be adjusted accurately
· Glue quantity adjustable on the pistol
· Glue flow duration adjustable at the pneumatic station
512230
LK-111 Glue pistol pneumatic
With control of quantity per impulse, release through workpiece
· Required glue quantity can be adjusted accurately
· Glue quantity adjustable on the pistol
· Glue flow duration adjustable at the pneumatic station
512240
Holder for LK-111
Build your own gluing station
512250
LK-120 Release unit
For manual or automatic gluing lines
Vertical type
Horizontal type
LK-130 Edge gluing unit
With pneumatic glue release, for edge widths of 16-60 mm
512420
512421
512430
Customized nozzles
We specialize in the production of customized nozzles. Please
send us the wood sample, indicating the surfaces to be glued.
Alternatively, please let us have an accurate and dimensioned
drawing. Price and delivery time upon request.
Profile edge nozzle, width according to profile sample
Counter profile nozzle according to your need
Surface nozzle according to your need
Dovetail nozzle according to pattern
Tongue nozzle according to your need
Window block according to your need, multiple tenon
512465
512899
512699
512850
512855
512884
23
Gluing system / Nozzles
Advantages of the Lamello nozzles
Art.-No.
Hard-coated surface:
· Hard ematal, 3/100 mm thick
· Resistant to wear (long service life)
· Good sliding qualities
· Easy-to-clean surface
Efficient nozzle substitution with bayonet-type connection
24
Nozzles for edges
Brush 20 mm
Brush 25 mm
Brush 30 mm
Brush 40 mm
Brush 50 mm
Brush 60 mm
Brush 80 mm
Brush 100 mm
Adjustable guide 0–25 mm for pointed -/ round nozzle
Adjustable nozzle 10–22 mm
Adjustable nozzle 23–42 mm
Adjustable nozzle 40–62 mm
Adjustable edge roller 10–46 mm
Pointed nozzle
Replacement point Ø 5/1,5 x 40mm
Round nozzle 5/4 x 30 mm
Replacement tube Ø 5/4 x 40 mm
Closing strip nozzle 5/30 mm
512401
512402
512403
512404
512405
512406
512408
512400
512425
512422
512442
512462
512446
512451
552451
512454
552454
512460
Nozzles for surfaces
Surface roller 180 mm
Replacement roller width 180 mm
Porous rubber roller width 180 mm
Gluing brush 50 x 35 mm
Surface nozzle 70 mm
Surface nozzle 120 mm
Surface nozzle 180 mm
512602
552610
552611
512605
512607
512612
512618
Nozzles for joints
Dowel nozzle Ø 6 x 20 mm
Dowel nozzle Ø 8 x 25 mm
Dowel nozzle Ø 8 x 32 mm
Dowel nozzle Ø 3/8“ x 30 mm
Dowel nozzle Ø 10 x 30 mm
Dowel nozzle Ø 12 x 40 mm
Dowel nozzle Ø 14 x 40 mm
Dowel nozzle Ø 15 x 45 mm
Dowel nozzle Ø 16 x 45 mm
Dowel nozzle Ø 18 x 50 mm
Dowel nozzle, double, Ø = ? mm, A = 32 mm
Dowel nozzle, double, Ø = ? mm, A = ? mm
Dowel nozzle, triple, Ø = ? mm, A = 32 mm
Dowel nozzle, triple, Ø = ? mm, A = ? mm
Dowel nozzle, quadruple, Ø = ? mm, A = 32 mm
Dowel nozzle, quadruple, Ø = ? mm, A = ? mm
512801
512802
512803
512804
512805
512806
512807
512808
512809
512810
512822
512823
512827
512828
512832
512833
Gluing system / Nozzles
Art.-No.
Lamello nozzle size 0
Lamello nozzle size 10
Lamello nozzle size 20
512843
512844
512845
Nozzles for joints
Tongue nozzle 70 x 30 x 4 mm (plastics)
Slot nozzle 8 x 20 mm
Slot nozzle 8 x 40 mm
Slot nozzle 10 x 20 mm
Slot nozzle 10 x 40 mm
Slot nozzle 12 x 20 mm
Slot nozzle 12 x 40 mm
Universal tongue 30 x 100 x 4.5 mm
Universal tongue 50 x 110 x 4.5 mm
Roller nozzle 20 mm, Ø 7 mm
Roller nozzle 25 mm, Ø 7 mm
Roller nozzle 50 mm, Ø 7 mm
Roller nozzle 50 mm massive, Ø 7 mm
Roller nozzle 75 mm. Ø 9 mm
Minispot-nozzle size 2
Minispot-nozzle size 8
Minispot-nozzle size 15
Minispot-nozzle size 20
Minispot-nozzle sizee 22
512854
512860
512861
512862
512863
512864
512865
512870
512871
512878
512879
512875
512876
512877
512888
512896
512894
512892
512887
Nozzles for grooves
Groove nozzle 12 mm
Groove nozzle 14 mm
Groove nozzle 15 mm
Groove nozzle 18 mm
Groove nozzle 20 mm
Groove nozzle 25 mm
Groove nozzle 32 mm
U nozzle 4 x 5 mm, glue outlets only in the groove
U nozzle 4 x 8 mm
U nozzle 5 x 12 mm
U nozzle 6 x 12 mm
U nozzle with angled connector, 3 x 5 mm
U nozzle with angled connector, 4 x 8 mm
U nozzle with angled connector, 4,5 x 6 mm
U nozzle with angled connector, 5 x 12 mm
U nozzle with angled connector, 6 x 12 mm
T nozzle 4 x 8 x 16 mm, outlets in the groove and surface
T nozzle 4 x 8 x 22 mm
T nozzle 5 x 12 x 16 mm
T nozzle 5 x 12 x 19 mm
T nozzle 5 x 12 x 22 mm
T nozzle 6 x 12 x 22 mm
T nozzle with angled connector, 4 x 8 x 16 mm
T nozzle with angled connector, 4 x 8 x 19 mm
T nozzle with angled connector, 4 x 8 x 22 mm
T nozzle with angled connector, 5 x 12 x 16 mm
T nozzle with angled connector, 5 x 12 x 19 mm
T nozzle with angled connector, 5 x 12 x 22 mm
T nozzle with angled connector, 6 x 12 x 22 mm
T nozzle with angled connector, 7 x 12 x 22 mm
T nozzle with angled connector, 8 x 12 x 22 mm
513001
513002
513003
513004
513005
513006
513007
513010
513011
513012
513013
513020
513021
513022
513023
513024
513030
513031
513032
513033
513034
513035
513050
513051
513052
513053
513054
513055
513056
513057
513058
25
Gluing system / Accessories
Art.-No.
LK Boy
Trolley for LK-10, LK-5 and LK-3
· For easy and simple transport of your LK
· Incl. service boiler, cover and grid basket to submerge
nozzles in water when not in use, volume 4 litres
· Dimensions 650 x 360 x 1000 mm
533210
LK Service carriage
The mobile station for LK-10 and LK-5
· adjustable suspension rod
· Incl. service boiler with grip, cover and grid basket to
submerge nozzles in water when not in use, volume 4 l
· Dimensions 410 x 410 x 850 mm
533205
LK Rolling base with grip
For LK-5 and LK-3
· On 4 wheels with pushing grip
· Complete with water container and hook for suspension of
hose
· Dimensions 254 x 254 x 820 mm
533204
LK Rolling base
Allows pulling behind on hose of LK-5 and LK-3
· Lowered platform for secure placement of the glue applicator
· Dimensions 254 x 254 mm
533201
Accessories for the LK glueing system
Connector 3/4“
Connector US
Cleaning brush 16 x 35 mm
Cleaning brush round Ø 6 mm
Service container, volume 4 litres
Water reservoir complete
Large water reservoi complete
26
inner Ø 60 x 90 mm
inner 134 x 60 x 60 mm
533250
533251
533252
533253
533255
533260
533261
Distributor for 2-3 additional hoses
Balancer for hose hanger
Connector with external thread, M8
Connector with 2 screws, M4 x 10
Adjustable suspension rod for service carriage
533238
533247
533230
533240
553200
Hose mounted,
10 x 4000 mm
Hose mounted,
13 x 4000 mm
Hose 10 mm
per meter
Hose 13 mm
per meter
Hose fitting set Ø 10 mm
Hose fitting set Ø 13 mm
Twist joint for hose Ø 10 mm, complete
533215
533216
553210
553213
533222
533223
533265
Empty glue container 3 kg, incl. cover with 1 hole
Empty glue container 5 kg, incl. cover with 1 hole
Empty glue container 10 kg, incl. cover with 2 holes
Snap-on cover without hole for 5 kg container
Snap-on cover without hole for 10 kg container
533224
533225
533226
553205
553224
Gluing system / PUR glues
Art.-No.
LK glueing system for non-water-soluble glues (PUR)
Equipment for 1-component PUR adhesives on basis of Polyurethane. These adhesives are not water soluble!
Please note:
1. The pressure tank can not be pumped up with normal air.
(azote 4.5)
2. The equipment can be pumped up with normal air with a
suitable glue bag*.
3. Use Pistol with special washers for PUR
4. The hose has to be replaced every 2-3 months
5. The pistol and nozzles have to be cleaned with appropiated
Glue applicator LK-5 PUR
502006
· Stainless steel pressure tank, cover inside with hook for
suspension of the glue bag (thread nut)
· Glue pistol LK-0 PUR
· Container for glue pistol
· Pointed nozzle
· Pump hose
· Hose fitting set for hose Ø 13 mm
Hose for PUR glue
Ø 13 mm normal hose flexibel
per meter
(have to be replaced every 2-3 months)
553213
Glue pistol LK-0 PUR
With special sealing for PUR glues
512202
Connector for KS-nozzle
533235
KS-nozzle for PUR, width 80 mm, outlets 10/30/50/70 mm
512487
Nozzles for edges PUR dismountable
(for thoroughly cleaning of reinforced glue)
Width 30 mm, 2 outlets 3.0 x 1.5 mm
Width 40 mm, 4 outlets 3.0 x 1.5 mm
Width 50 mm, 4 outlets 3.5 x 1.5 mm
Width 60 mm, 4 outlets 3.5 x 1.5 mm
Special stop for edge nozzles +/- 2.5 mm
512480
512481
512482
512483
552480
Nozzles for surfaces PUR dismountable
(for thoroughly cleaning of reinforced glue)
Width 120 mm, 8 outlets 3.5 x 1.5 mm
Width 140 mm, 8 outlets 3.5 x 1.5 mm
512680
512681
* Please ask for professional specialist counselling.
27
Miscellaneous products
Art.-No.
Miniligno
021000
Moisture meter for wood
· Measuring range 6 - 20%
· Incl. battery, replacement pins, bag
Miniligno S
021010
Moisture meter for wood and building materials
· Measuring range wood 6 - 20%
· Measuring range building materials: dry, damp, wet
· Incl. battery, replacement pins and bag
CombiScan
021015
Moister measuring without perforation of the surface
Two measuring depth by one equipment
· With contact electrodes instead of pins
· measuring depth is switchable between 7 or 20 mm
· Digital display, measuring range 6 - 22%
· Adjustable in 30 types of woods = 15 groups of density
· Dimensions 135 x 65 x 25 mm
· Incl. battery
Worktop jig
For precise joining of worktops in 90° or 2 x 45° angle
· Water resistant, heat and light resistant
· To be used with a router, guide bush Ø 30 mm,
Standard jig for worktops up to 650 mm width
Size 1000 x 400 mm
121300
S-PLUS jig for worktops up to 1000 mm width
Size 1400 x 400 mm
121302
Peg for worktop jigs (1 piece)
121310
End milling cutter for worktop jig
28
page
34
Suction accessories
Art.-No.
Suction set 23
For biscuit joiner, 3S, Perfora
· 3 m suction hose black, int. Ø 23 mm
· Conical connecting piece for hose Ø 30 - 42 mm
121810
Suction set 30
For Plano 45, Cantex, Tanga, G20 and Lamina
· 3 m suction hose grey, int. Ø 30 mm
· Conical connecting piece for hose Ø 30 - 42 mm
121815
Spare parts suction sets:
Suction hose black, int. Ø 23 mm
price per meter
Suction hose grey, int. Ø 24 mm*
price per meter
Suction hose grey, int. Ø 30 mm
price per meter
Conical connecting piece for suction hose, int. Ø 23 mm
Conical connecting piece for suction hose, int. Ø 24 mm
Conical connecting piece for suction hose, int. Ø 30 mm
* (Suction hose int. Ø 24 mm for Tanga 150/1511)
331808
331500
331520
331802
281815
331803
Suction hose adapter 54 and 58 mm
For suction set 23 and 30
331805
Suction stub
For biscuit joiners, Perfora, cutting unit Patchmaker
331006
Deflector stub
For biscuit joiners
331005
Extractor stub 36 mm (Festool compatible)
For biscuit joiners
331007
Dust bag + adapter Ø 36 mm
For biscuit joiners
257530
Dust bag adapter
For Dynamik
283035
Dust bags for dust bag adapter, 10 pieces
283030
Suction stub
For Plano and Plano 6114
331824
Suction stub LMA-74
For 3S, G2A, G2, Junior 10, Dynamic, Directa and Top
(fits suction hose, int. Ø 23 mm
281804
For vacuum cleaner AS 20
Filter cassette
Dust bags, 5 items
281860
281869
29
Cutting tools, accessories for the
wood joining system
Art.-No.
Groove cutters Ø 100 x 4 x 22 mm
Art. 132000
HW-Cutter Z2 with 4 scoring teeth, 4 side holes, hub Top 20
HW-Cutter Z6 (3+3) alternating teeth, hub
Top 10
HW-Cutter Z2
Directa / Cobra
132000
132103
132104
HW-Cutter Z4, 4 side holes, hub
Top 20/Classic
Ø 78 x 3 x 22 mm (for wooden Lamello plates size 9)
132009
HW-Cutter Z6 alternating teeth, distance ring, without hub
Ø 100 x 4 x 22 mm
Classic C2/C3
132106
HW-Reversing blades cutter, with hub
Ø 100 x 4 x 22 mm, Z4, 4 side holes
132001
Top 20/Classic
HW-Reversing blades cutter for Art. 132001, set with 4 pieces
132111
HW-Reversing blades cutter, distance ring, without hub
Ø 100 x 4 x 22 mm, Z4 with 4 scoring teeth, 4 side holes,
Top 20/Classic
HW-Reversing blades for Art. 132130, main teeth, 1 piece
HW-Reversing blades for Art. 132130, scoring teeth, 1 piece
132130
132131
132132
Saw blades for biscuit joiners for shadow joints
See therefor information on page 31 (Joint width)
HW-Saw blade 20 teeth, 4 side-holes, 2 distance rings
CV-Saw blade 60 teeth
100 x 2,2 x 22 mm
132350
132450
HW-Saw blade 20 teeth, with flange M8 100 x 2,4 x 22 mm
HW-Saw blade 20 teeth, with flange M10 only for Classic old
CV-Saw blade 60 teeth, with flange M8 100 x 2,2 x 22 mm
132380
132381
132480
Distance rings 40 x 22 x 1 mm with side holes
322510
Flange M8 for saw blade, with screws
Flange M10 for saw blade, with screws, only for Classic old
252502
252504
Edge trimming unit Lamello Nova
For trimming of projecting wooden and plastic edges (18 mm)
121280
Slide shoe for plate joining machines
To protect the wall and the machine
251059
HW = new denomination of HM according to ISO
HW = cutter from hard-metal (based on tungsten carbide)
30
Cutting tools for the wood repair system
Art.-No.
Minispot cutters
For Minispot patches size 2
HW-cutter 100 x 8 x 22 mm Z4, 4 side holes
G2A, BJ*
For Minispot patches size 22
HW-cutter 100 x 15 x 22 mm Z4
G20
For Minispot patches size 4
HW-cutter 100 x 15 x 22 mm Z4
G20
For Minispot patches size 8
HW-cutter 100 x 8 x 22 mm Z4
G2A, BJ*
132217
132209
132208
132212
Art. 132209
For Minispot patches size 15
G20
HW-cutter with profile knives Z2 100 x 15 x 22 mm
HW-Profile knives, size 15
2 pieces
132215
132216
For Minispot patches size 20
G20
HW-cutter with profile knives Z2 100 x 20 x 22 mm
HW-Profil knives, size 20
2 pieces
132220
132221
Our recommendation:
For Minispot patches size 20
HW-cutter 100 x 20 x 22 mm Z4
G20
132222
* BJ = Biscuit joiner: Top 20, Top 10, Classic...
Saw blades for shadow joint cutter 3S
Cutting depth 30 mm
HW-Saw blade 20 teeth, 2 distance rings 120 x 2,4 x 22 mm
CV-Saw blade 60 teeth, 2 distance rings 120 x 2,2 x 22 mm
132312
132412
HW-Saw blade 20 teeth, with flange M8 120 x 2,4 x 22 mm
CV-Saw blade 60 teeth, with flange M8 120 x 2,2 x 22 mm
132382
132482
Accessories for saw blades
Flange M8 for saw blade, with screws for 3S, biscuit joiners
Distance rings 40 x 22 x 1 mm
Distance rings 40 x 22 x 0,5 mm
252502
322501
322502
Shadow joining width, mm
8
9
10
11
12
+1
+2
Classic C2 / C3 / BJ,
Shadow joint cutter 3S Pa
Top 20 / S2 / S3
Height adjustment SMS
+ Height adjustment SMS
-2
-1
+/- 0
HW = new denomination of HM according to ISO
HW = cutter from hard-metal (based on tungsten carbide)
31
Cutting tools and accessories for special power tools
Art.-No.
Saw blade for multipurpose cutter Tanga
Ø 200 x 2,4 x 22,2 mm, 4 side holes, cutting depth 68 mm
HW-Saw blade Z12
Tanga Delta
HW-Saw blade Z24
Tanga Delta
HW-Saw blade Z24 special
Tanga Delta
(nail resistant, only for dipping suitable)
132322
132320
132321
Ø 180 x 2,4 x 22,2 mm, 6 side holes, cutting depth 60 mm
HW-Saw blade Z12
Tanga Swiss / 1811 / Dia
HW-Saw blade Z24
Tanga Swiss / 1811 / Dia
CV- Saw blade Z36
Tanga Swiss / 1811 / Dia
HW-Saw blade Z24 special
Tanga Swiss / 1811 / Dia
(nail resistant, only for dipping suitable)
132317
132318
132418
132319
Ø 150 x 2,4 x 22,2 mm, 6 side holes, cutting depth 45 mm
HW-Saw blade Z12
Tanga 150 / 1511
HW-Saw blade Z24
Tanga 150 / 1511
CV- Saw blade Z32
Tanga 150 / 1511
HW-Saw blade Z26 special
Tanga 150 / 1511
(nail resistant, only for dipping suitable)
132315
132316
132415
132314
Diamond blade for multipurpose cutter Tanga
Ø 200 x 2,6 x 22,2 mm, 4 side holes, cutting depth 68 mm
Diamond blade
Tanga Delta
132517
Ø 180 x 2,6 x 22,2 mm, 4 side holes, cutting depth 58 mm
Diamond blade
Tanga Dia
Diamond blade
Tanga Delta
132518
132519
(for an easy and perfect cut in flagstones and plaster)
Ø 180 x 2,6 x 22,2 mm, 4 side holes, cutting depth 58 mm
Diamond blade segmented
Tanga Dia
Diamond blade segmented
Tanga Delta
132520
132521
(for a high cutting power)
Attention:
Please use only original Lamello blades for a perfect cutting
quality to prevent damage on the machine.
Rabbet stop for Tanga 180 / 1811 S / Swiss
251525
Rabbet stop for Tanga 150 / 1511
251510
HW = new denomination of HM according to ISO
HW = cutter from hard-metal (based on tungsten carbide)
32
Cutting tools and accessories for special power tools
Art.-No.
HW-Reversing blades for Plano 45 + Cantex 3 pieces
131822
Screw for HW-reversing blades for Plano 45 + Cantex
352356
HW-Form cutter for Lamina
Ø 30 mm, for 90° and 35°
Ø 30 mm, for 90° and 22°
Ø 28 mm, for 90° and 45°
Ø 30 mm, degres according your needs, 0 - 20° possible
131980
131981
131982
131983
HW-Edge cutter for Profila
Radius 3 mm, shaft-Ø 6 mm
Radius 2 mm, shaft-Ø 6 mm
131957
131951
Collet chuck 6 mm
Collet chuck 8 mm
Collet chuck 1/4“
Collet chuck 6 mm
Collet chuck 8 mm
Collet chuck 1/4“
251960
251962
251961
251966
251968
251967
for Profila E
for Profila E
for Profila E
for Profila P
for Profila P
for Profila P
HW-Saw blade 20 teeth for Patchmaker
100 x 2,4 x 22 mm
132301
HW-Profile cutter 2 teeth for Patchmaker
Shaft Ø 8 mm
131600
HW-End milling cutter for Perfora
Ø 10 x 15 mm, shaft Ø 8 mm
131970
HW = new denomination of HM according to ISO
HW = cutter from hard-metal (based on tungsten carbide)
33
Cutting tools and accessories for
miscellaneous products
Art.-No.
Accessories handtool sharpening machine
LEPUS
Finishing disc (Grain 500)
100 x 50 x 20 mm
135017
Grinding disc rough (Grain 60)
100 x 50 x 20 mm
135032
100 x 50 x 15 mm
135005
WSL
Corundum wheel (Grain 60)
34
Grinding solution WS01 1.5 kg
275001
Grinding solution WS01 3.2 kg
275003
Grinding solution WS01 5.4 kg
275006
Grinding solution WS01 11.0 kg
275011
HW-End milling cutter for worktop jig
Ø 12,7 x 50 mm, shaft-Ø 12 mm, total length 100 mm
131300
HW-Reversing teeth cutter for worktop jig
Ø 12,7 x 50 mm, shaft-Ø 12 mm, total length 100 mm
131305
HW-Reversing teeth for reversing teeth cutter, 10 pieces
131310
HW-Reversing blades for S381, 10 pieces
133000
25 1023
25 1023
25 1004
25 1004
25 1000
25 1220
25 1250
25 1050
25 1000
25 1050
25 1050
25 3000
25 1117
25 4552
25 1751
25 1730
25 1765
25 1417
25 1417
25 1731
25 1731
25 1731
25 1322
25 1322
Plano 45 S2/ Cantex S2
25 1855
25 1858
25 1810
25 1811
25 1812
Plano 45/ S/ Cantex/ S
25 1210
25 1520
25 1810
Tanga 180/ 1811
25 6101
25 1526
Plano
Plano 6114
Tanga 1811 S/ 1811 S2
Tanga Swiss
Tanga 150/1511
25 1210
25 7001
25 1532
3S L47
3S
Minispot G22
Minispot G20
Minispot G20 S2
Minispot G2
Minispot G2A
Cobra 10
Junior 10
Dynamic
Standard 10A
Classic
Classic C2
Experta / Classic C3
Top
Top 10
Top 20/ Top 20 S
Top 20 S2
Complete Lamello spare parts documentation
available on request
25 1517
25 1210
25 1210
25 1210
25 6101
25 1210
25 1702
25 4552
25 1065
25 1310
25 3010
25 1030
25 1230
25 4550
25 4550
25 1110
25 1010
25 4050
25 4301
25 1704
Anti-slip pad
25 1705
25 1005
25 3005
25 1005
25 1223
25 1255
25 1055
25 1005
25 1055
25 1055
25 1060
Swivelling stop
25 1300
25 3022
25 3020
Cassette
25 1004
25 3022
25 1020
25 1222
25 1252
25 1052
25 1120
25 1020
25 1052
25 1052
Base plate
25 1004
25 1023
25 3022
25 1023
25 1004
25 3022
25 3024
25 1024
33 1050
25 3024
25 3022
25 3022
25 3024
25 1024
Slip-on plate 4 mm
33 1050
25 1023
25 1023
25 1004
25 3024
Guide
25 1704
25 1320
25 1321
25 1024
33 1050
Slip-on plate 2 mm
25 1024
Base plate
incl. Swivelling stop
33 1050
Spare parts
Front stop, plastic
35
36
32 1830
32 1830
31 4043
31 4043
Ball set for height
adjustment
32 1057
Height scale
31 4043
Clamping lever for swivelling
stop
35 2812
25 1225
25 1025
25 3025
25 1025
25 1017
25 1017
25 1017
25 1025
25 1054
25 1017
25 1017
35 2812
25 1054
25 1018
25 1018
32 1040
32 1040
32 1040
25 1059
25 1059
35 2816
35 2812
35 2816
35 2812
35 2812
31 3160
25 1116
25 1016
25 1116
25 1016
25 1016
25 1116
25 1750
25 1850
Plano
Plano 6114
25 1016
35 2812
Plano 45 S2/ Cantex S2
Plano 45/ S/ Cantex/ S
Tanga 180/ 1811
Tanga 1811 S/ 1811 S2
Tanga Swiss
Tanga 150/1511
3S L47
Minispot G20
Minispot G20 S2
25 2028
25 2028
3S
35 2812
25 1736
Complete Lamello spare parts documentation
available on request
25 1850
Minispot G22
25 1736
25 1732
Minispot G2
25 1732
35 2812
25 1116
Minispot G2A
33 1700
35 2816
Cobra 10
Junior 10
Dynamic
Standard 10A
Classic
Classic C2
Experta / Classic C3
25 1016
35 2812
35 2812
35 2812
35 2816
35 2816
Top
Top 10
Top 20/ Top 20 S
Top 20 S2
33 1700
25 1116
25 1016
25 1016
25 1016
25 1016
35 2812
35 2812
35 2812
25 1017
25 1016
25 1016
25 1016
35 2812
25 1125
32 1040
25 1059
25 1016
25 1119
25 1018
25 1018
Slide shoe
25 1025
25 1059
Transparent bottom
covering
25 1054
25 1018
Handle
25 1017
25 1054
Screw for handle
25 1017
25 1017
Stop square incl. clamping
lever
32 1057
Clamping lever for
stop square
31 4043
Spare parts
25 1013
25 1706
25 1414
35 1111
35 1111
25 1414
25 1414
25 1530
25 1523
25 1706
25 1414
25 1414
25 1530
25 1513
35 1111
25 1212
35 1520
34 1112
34 1112
34 1112
34 1112
34 1112
34 1215
34 1215
34 1215
34 1215
34 1215
25 1519
Plano 45/ S/ Cantex/ S
Plano 45 S2/ Cantex S2
25 1852
25 1852
Plano
Plano 6114
Tanga 180/ 1811
Tanga 1811 S/ 1811 S2
Tanga Swiss
Tanga 150/1511
25 1521
25 1521
25 1524
3S L47
3S
Minispot G22
Minispot G20
Minispot G20 S2
Minispot G2
Minispot G2A
Cobra 10
Junior 10
Dynamic
Standard 10A
Classic
Classic C2
Experta
Complete Lamello spare parts documentation
available on request
35 1520
35 1520
35 1111
35 1111
35 1111
25 1212
25 1414
35 1712
25 1212
25 1212
25 1758
25 1212
25 1706
25 1706
25 1706
25 1012
25 1013
35 1111
35 1111
35 1111
35 1111
35 1111
35 1111
25 1012
25 1013
34 1112
Top 20/ Top 20 S
Top 20 S2
Top
Ring nut 10 x 6 x 1,5 mm
35 1111
Milled nut 10 mm
Top 10
Sliding guide
35 1111
35 1111
35 1111
25 1212
25 1012
25 1013
Depth adjusting sleeve
35 1111
25 1012
25 1013
Tension spring
25 1212
25 1012
25 1012
25 4051
25 1013
25 1012
25 4051
25 1012
25 1012
Depth adjuster
25 4051
Holder for depth adjuster
25 1012
Depth adjuster
25 4051
Spare parts
Depth adjuster
37
Survey of carbon brushes and motors
Machine typ
Motors
Carbon brushes
Dimensions
Top 20 S / S2 / S3
L43 / S / S2 / S3
31 4305
230 V / 6.2 x 5 mm
31 4305 US
120 V / 6.2 x 5 mm
31 4013
120 V / 6.2 x 7.9 mm
31 4014
230 V / 6.2 x 7.9 mm
31 3512
230 V / 6.3 x 7.9 mm
31 3522
120 V / 6.3 x 7.9 mm
Top 20
Top 10
L40 / L42
7115
Experta
L45 / L46
31 4514
230, 120 V / 5 x 7.9 mm
Classic C2 / C3
L45 / L46
31 4514
230, 120 V / 5 x 7.9 mm
Classic
6114 / 6114 C
31 3512
230 V / 6.3 x 7.9 mm
31 3522
120 V / 6.3 x 7.9 mm
31 3512
230 V / 6.3 x 7.9 mm
31 3522
120 V / 6.3 x 7.9 mm
31 3512
230 V / 6.3 x 7.9 mm
31 3522
120 V / 6.3 x 7.9 mm
31 5035
230 V / 5 x 7.9 mm
31 5036
120 V / 5 x 7.9 mm
Standard 10A
Junior / Directa / Plano
Cobra 10
6114 / 6114 C
6114
D7640 H (L49)
Minispot G2A
L45 / L46
31 4514
230, 120 V / 5 x 7.9 mm
Minispot G2
L45 / L46
31 4514
230, 120 V / 5 x 7.9 mm
Minispot G20 S / G20 S2
L62
31 6006
230, 120 V / 8 x 6.2 mm
Minispot G20 / G22 / G222
9123
31 3512
230 V / 6.3 x 7.9 mm
31 3522
120 V / 6.3 x 7.9 mm
Minispot G4
9123
31 3512
230 V / 6.3 x 7.9 mm
31 3522
120 V / 6.3 x 7.9 mm
Perfora E
L50
31 4514
230, 120 V / 5 x 7.9 mm
Patchmaker cutting unit
L50
31 4514
230, 120 V / 5 x 7.9 mm
L51
31 4305
230 V / 6.2 x 5 mm
Patchmaker sawing unit
31 4305 US
120 V / 6.2 x 5 mm
6139
31 3304
230 V / 6.3 x 6.3 mm
D7640 H (L49)
31 5035
230 V / 5 x 7.9 mm
31 5036
120 V / 5 x 7.9 mm
Plano 45 S / S2 / Cantex S / S2
L60
31 6006
230, 120 V / 8 x 6.2 mm
Plano 45 / Cantex
L40 / L42
31 4013
120 V / 6.2 x 7.9 mm
31 4014
230 V / 6.2 x 7.9 mm
Cantex Ergo
L63
31 6006
230, 120 V / 8 x 6.2 mm
Plano 6114
6114C
31 3512
230 V / 6.3 x 7.9 mm
31 3522
120 V / 6.3 x 7.9 mm
L45 / L46 , L47
31 4514
230, 120 V / 5 x 7.9 mm
9123
31 3512
230 V / 6.3 x 7.9 mm
31 3522
120 V / 6.3 x 7.9 mm
31 4305
230 V / 6.2 x 5 mm
31 4305 US
120 V / 6.2 x 5 mm
3S / 3S PA
Lamina E / Lamina E2
L56
Lamina P / Lamina P2
P50
Profila E / Profila P2
L48, L50
31 4514
230, 120 V / 5 x 7.9 mm
L51
31 4305
230 V / 6.2 x 5 mm
31 4305 US
120 V / 6.2 x 5 mm
Profila P
P50
Tanga Delta S
L72
31 7206
230 V / 6.2 x 10 mm
Tanga Delta S2 / H
L73
31 7206
230 V / 6.2 x 10 mm
Tanga Swiss / Tanga Dia M
L70
31 7006
230 V / 11 x 4.9 mm
Tanga 1811 S / 1811 S2
L61
31 6006
230, 120 V / 8 x 6.2 mm
Tanga 1511 / 1811
11150
31 3132
230 V / 6.3x 7.9 mm
38
Tanga 1811 S 1811 S2
Tanga 1511/ 1811
Tanga Swiss / Tanga Dia M
•
•
•
Profila E
•
•
•
•
•
•
•
•
27 1958
Fork wrench 10 mm
•
•
27 1959L long
Socket-head key 4 mm
•
27 1960
Socket-head key 6 mm
•
27 1973
Fork wrench 13 mm
•
•
•
•
•
•
•
27 1961
Socket-head key 3 mm
27 1962
Oil can
•
•
•
•
•
•
•
•
•
•
•
•
•
•
27 1957
Wire hock
•
27 1956
Face spanner A25
•
27 1954
Fork wrench 8 mm
•
•
27 1953L lang
Socket-head key 5 mm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
27 1950
Sickle spanner25 mm
27 1953
Socket-head key 5 mm
Lamina P
•
•
•
•
•
•
•
27 1949
Face spanner 30/5 mm
•
•
•
27 1943
Socket-head key 5mm2.5mm
27 1951
Face spanner 30/4 mm
Lamina E
3S
•
•
•
•
•
•
•
•
•
•
27 1931
Torx srewdriver T25
•
•
•
•
•
•
•
•
•
27 1917
Torx key T15
27 1942
Socket-head key 2 mm
Plano 45 S2/ Cantex S2
•
•
27 1916
Torx key T10
27 1930
Torx srewdriver T20
Plano 45/ S/ Cantex/ S
Patchmaker
Perfora E
Perfora P / Profila P
Minispot G22
Minispot G20
•
•
Minispot G20 S / G20 S2
Minispot G2
Minispot G2A
•
•
Dynamic
Standard 10A
Classic
Classic C2
Experta
•
27 1913
Cross-head screwdriver
Top
Top 10
Top 20/ Top 20 S
Art.No.
Description
Top 20 S2
Survey of tools
•
•
27 1981
Ended spanner pair 16+18
•
27 1980
Ended spanner pair 14+19 m
•
27 1979
Fork wrench 19 mm
39
Notes
40