Solenoid valves MH1, miniature
Complete product range
for a wide range of applications
Extremely small
The new miniaturised generation of
poppet valves offers flow rates of
14 l/min in the 2/2-way version or
10 l/min in the 3/2-way version.
Either as an individual sub-base or
pre-assembled on a PR manifold rail.
In addition, mounting on a PR manifold rail enables very compact assembly. For increased requirements and
speed, the bigger MH2 with a flow rate
of up to 100 l/min is the ideal
solution.
Totally coordinated
Festo offers an extensive product
range including drives, rodless drives,
mini slides, rotary drives and
accessories under the umbrella term
“compact”. Perfectly coordinated and
geared towards all production areas
for the manufacture and processing of
very small products. All the components comply with Festo’s proven
quality standards and include the
added value that only a global
company can offer.
Extremely versatile and fast
The miniature valves can be linked
together via a pneumatic multiple
connector plate or electrical multi-pin
plug. There is also a choice between
horizontal electrical connections, on
top and underneath. Furthermore, a
connection for mounting on a PCB is
available. All components are tested
and assembled for Festo plug and
work®. Need a system to run as fast
as possible? No problem! The
response time of the miniature valves
is an impressive 4 ms.
2
Internet: www.festo.com/catalogue/...
Subject to change – 2010/01
Miniature valves not just for the electronics industry …
… but also for the light assembly,
medical technology and semiconductor industries and wherever extremely
compact and fast-switching valves or
pilot valves are required for valves
coming into contact with media
(e.g. process industry). With response
times of approximately 4 ms, these
valves satisfy all requirements for
speed. Vacuum functions can also be
easily implemented. A 100% duty
cycle and even a three-shift operation
guarantee maximum costeffectiveness.
2010/01 – Subject to change
With flow rates of 10 and 14 l/min for
the miniature valves, there is always
sufficient volume for pilot control of
process valves. The flow rate is also
adequate for Festo’s wide range of
compact cylinders, rotary drives and
slides.
For increased requirements of up to
100 l/min: MH2.
Internet: www.festo.com/catalogue/...
3
-V- New
2x2/2-way valve
Solenoid valves MH1, miniature
Product range overview
Function
Circuit symbol
y
2/2-way
/
y valve
Version
Voltage [V DC]
5
12
Page/
g /
Internet
24
Standard nominal flow rate 14 l/min
Semi in-line valve
6
Sub-base valve
18
Standard nominal flow rate 30 l/min, controls vacuum or ejector pulse
–
–
35
Semi in-line valve
6
Sub-base valve
18
Sub-base valve with LED
–
–
18
35
Sub-base valve
3/2-way valve1)
Standard nominal flow rate 10 l/min
2x2/2-way valve
Standard nominal flow rate 30 l/min, controls vacuum and ejector pulse
Sub-base valve with LED
1)
–
–
Can be used as a 2/2-way valve by sealing port 1 or 3
Mounting options
Design
Semi in-line
valve
Without LED
Sub-base valve
Without LED
With LED
–
–
Individual sub-base
Manifold assembly
Individual sub-base with plug base
Manifold assembly with plug bases
Manifold assembly with plug bases and
electrical multi-pin plug
Manifold assembly
on PCB with soldering bases
Manifold assembly on PCB with soldering
bases and pneumatic multiple connector
plate
–
Electrical connection
Plug connection at rear (HC)
Individual sub-base
Manifold assembly
Sub-base with 2x2/2-way valve fully
assembled
Plug connection on top (TC)
Plug connection underneath (PI)
4
Internet: www.festo.com/catalogue/...
Subject to change – 2010/01
Solenoid valves MH1, miniature
Type codes
MH
A
1
–
M
4
L
H
–
3/2
–
O
–
M3
–
HC
Valve family
MH
Miniature and fast-switching valves
Design
P
A
Semi in-line valve
Sub-base valve
Size
1
Flow rate 10 … 14 l/min
Drive type
M
Solenoid, switching
Operating voltage
4
5
1
5 V DC
12 V DC
24 V DC
Signal status display
–
L
No
LED
Manual override
H
Non-detenting/detenting
Valve function
2/2
3/2
2/2-way valve
3/2-way valve
Normal position
G
O
Closed
Open
Pneumatic connection
0.6
0.9
M3
Nominal size 0.65 mm
Nominal size 0.9 mm
M3 thread
Electrical connection
HC
TC
PI
-H-
Plug connection at rear
for plug socket KMH
Plug connection on top
for plug socket KMH
Plug connection underneath
for plug-in connection
Note
Further variants and accessories can be configured
and ordered using the modular system.
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
5
Solenoid valves MHP1, miniature
Peripherals overview – Semi in-line valve, valve manifold
Plug connection at rear …-HC, plug connection on top …-TC
6
5
7
5
2
7
1
9
7
8
aJ
3
7
4
7 8
aJ
Accessories
Page/
Internet
1
2
3
4
5
6
Semi in-line valve MHP1-…-HC
Semi in-line valve MHP1-…-TC
Individual sub-base MHP1-AS-3-M3
Manifold block MHP1-PR…-3
Plug socket with cable KMH
9
9
12
12
37
Internet: www.festo.com/catalogue/...
Page/
Internet
6
7
8
9
aJ
Inscription label MH-BZ-80X
Push-in fittings QS/QSM
Silencer UC
Blanking plate MHAP1-BP-3 for sealing vacant positions
Blanking plug B
37
qs
uc
37
37
Subject to change – 2010/01
Solenoid valves MHP1, miniature
Peripherals overview – Semi in-line valve, valve terminal
Plug connection underneath …-PI
8
9
6
1
7
aA
aC
2
8
9 aJ
9
3
aJ
aC
9
4
5
aB
Accessories
Page/
Internet
1
2
3
4
5
6
Semi in-line valve MHP1-...-PI
Individual sub-base MHP1-AS-3-M3-PI
Manifold block MHP1-PR…-3-PI with plug bases
Manifold block MHP1-PR…-3-PI-D…
with plug bases and electrical multi-pin plug
Manifold block MHP1-PR…-3-PI-PCB
3
for mounting on PCB
Plug base MHAP-PI
2010/01 – Subject to change
Page/
Internet
9
12
12
14
7
8
9
aJ
Soldering base PCBC-A
Inscription label MH-BZ-80x
Push-in fittings QS/QSM
Silencer UC
37
37
qs
uc
15
aA
aB
aC
Blanking plate MHAP1-BP-3-PI for sealing vacant positions
PCB (user-specific)
Blanking plug B
37
15
37
37
Internet: www.festo.com/catalogue/...
7
Solenoid valves MHP1, miniature
Peripherals overview – 2x2/2-way valve
2x2/2-way valve
7
1
3
3
6
4
2
4
5
Accessories
Page/
Internet
1
2
3
4
8
Solenoid valve MHA1-2x2/2G-1,5-…
Sub-base
Solenoid valve MHA1-M1LCH-2/2G-1.5-HC
Push-in cartridge
35
–
35
–
Internet: www.festo.com/catalogue/...
Page/
Internet
5
6
7
Clip
Plug socket with cable KMH
Inscription label MH-BZ-80x
–
37
37
Subject to change – 2010/01
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
-P-
Function
-L-Q-
Voltage
5, 12, 24 V DC
Pressure
–0.9 … +8 bar
Temperature range
–5 … +50 °C
General technical data
Valve function
2/2-way, single solenoid
Constructional design
Sealing principle
Actuation type
Reset method
Type of pilot control
Direction of flow
Exhaust function
Manual override
Type of mounting
Mounting position
Nominal size
Standard nominal flow rate
Grid dimension
Pneumatic
Individual sub-base
connection
Manifold assemblyy
Product weight
[mm]
[l/min]
[mm]
1, 33
2
3, 11
1, 33
2
3, 11
[g]
Operating and environmental conditions
Valve function
Operating medium
Operating
p
g ppressure Normally closed
range
Normally open
Ambient
Individual mounting
temperature
Manifold assembly
Temperature
p
Individual mounting
of medium
Manifold assembly
Storage temperature
Corrosion resistance class CRC
1)
2)
[bar]
[bar]
[°C]
[°C]
[°C]
[°C]
[°C]
Poppet valve with spring return
Soft
Electric
Mechanical spring
Direct
Non-reversible
–
Non-detenting
On sub-base via through-holes
Any
0.9
14 (2 bar > 0 bar)
10
M3
M3
–
M7
M3
–
10
3/2-way, single solenoid
With flow control
0.65
10
10
M3
M3
M3
M7
M3
M7
10
2/2-way, single solenoid
3/2-way, single solenoid
Filtered compressed air,
lubricated or unlubricated,
unlubricated
grade of filtration 40 µm
Vacuum, grade of filtration 40 µm
–0.9 … +2
–
–5 … +50
–5 … +40
–5 … +50
–5 … +40
–20 … +60
22)
Filtered compressed air,
lubricated or unlubricated,
unlubricated
grade of filtration 40 µm
–
0 … 81)
0 … 61)
Vacuum operation possible with special connection method
Corrosion resistance class 2 as per Festo standard 940 070
Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or
lubricating agents.
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
9
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
Electrical data
Valve function
2/2-way, single solenoid
Operating voltage
Type of connection
Power consumption
Duty cycle
[V DC]
[W]
Protection class to EN 60529
With plug socket KMH
With plug base MHAP-PI
With soldering base PCBC-A
With Sub-D connector plug
3/2-way, single solenoid
5 ±10%, 12 ±10% or 24 ±10%
Plug connection
1
100%
IP40
Response times and switching frequencies
Valve function
Response time on/off
Maximum switching frequency
[ms]
[Hz]
2/2-way, single solenoid
3/2-way, single solenoid
4/5
20
4/4
Materials
1
2
4
3
1
2
3
4
–
Housing
Sub-base
Plug base
Coil housing
Seals
Note on materials
10
Internet: www.festo.com/catalogue/...
Polyphenylene sulphide
Aluminium
Polyamide
Polyamide
Fluoro elastomer,
nitrile rubber,
hydrogenated nitrile rubber
Free of copper and PTFE
Subject to change – 2010/01
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
Download CAD data www.festo.com
Dimensions
Plug connection on top
Plug connection at rear
Plug connection underneath
1 Plug socket KMH-…
2 Manual override
3 Coding pin
Hole pattern on sub-bases
-H1 Hole for coding pin
2010/01 – Subject to change
Note
With semi in-line valves, port 2 is not
used. If used as a 2/2-way valve,
normally closed, port 3/11 is not
used.
Internet: www.festo.com/catalogue/...
If used as a 2/2-way valve, normally
open, port 1/33 is not used.
11
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
Download CAD data www.festo.com
Dimensions – 2/2-way valve
Individual sub-base
1
2
3
4
5
Plug base MHAP-PI
Fitting QSM-...
Plug connection on top
Plug connection at rear
Plug connection underneath
1
2
3
4
5
6
Plug base MHAP-PI
Blanking plate MHAP1
Fitting QSM-...
Plug connection on top
Plug connection at rear
Plug connection underneath
Manifold assembly
Valve positions n
2
3
4
5
6
7
8
12
L1
±0.15
L2
±0.1
L3
Valve positions n
35
45
55
65
75
85
95
27
37
47
57
67
77
87
10
20
30
40
50
60
70
9
10
11
12
13
14
15
L1
±0.15
L2
±0.1
L3
105
115
125
135
145
155
165
97
107
117
127
137
147
157
80
90
100
110
120
130
140
Internet: www.festo.com/catalogue/...
Valve positions n
16
17
18
19
20
21
22
L1
±0.15
L2
±0.1
L3
175
185
195
205
215
225
235
167
177
187
197
207
217
227
150
160
170
180
190
200
210
Subject to change – 2010/01
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Individual sub-base
1
2
3
4
5
Plug base MHAP-PI
Fitting QSM-...
Plug connection on top
Plug connection at rear
Plug connection underneath
1
2
3
4
5
6
7
Plug base MHAP-PI
Blanking plate MHAP1
Fitting QSM-...
Silencer
Plug connection on top
Plug connection at rear
Plug connection underneath
Manifold assembly
Valve positions n
2
3
4
5
6
7
8
L1
±0.15
L2
±0.1
L3
Valve positions n
35
45
55
65
75
85
95
27
37
47
57
67
77
87
10
20
30
40
50
60
70
9
10
11
12
13
14
15
2010/01 – Subject to change
L1
±0.15
L2
±0.1
L3
105
115
125
135
145
155
165
97
107
117
127
137
147
157
80
90
100
110
120
130
140
Valve positions n
16
17
18
19
20
21
22
Internet: www.festo.com/catalogue/...
L1
±0.15
L2
±0.1
L3
175
185
195
205
215
225
235
167
177
187
197
207
217
227
150
160
170
180
190
200
210
13
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Manifold assembly with electrical multi-pin plug
1 Plug base MHAP-PI
2 Sub-D plug, plug exit on top
(standard)
3 Blanking plate MHAP1
4 Fitting QSM-...
5 Silencer
Valve positions n
2
4
6
8
L1
±0.15
L2
±0.1
L3
Valve positions n
70
90
110
130
63
83
103
123
10
30
50
70
10
12
14
16
L1
±0.15
L2
±0.1
L3
172
192
212
232
165
185
205
225
90
110
130
150
Valve positions n
18
20
22
L1
±0.15
L2
±0.1
L3
252
272
292
245
265
285
170
190
210
Electrical multi-pin plug – Plug directions
To pneumatic side
14
To electrical side
To top (standard)
Internet: www.festo.com/catalogue/...
Subject to change – 2010/01
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Manifold assembly on PCB
1 Soldering base PCBC-A-...
2 Blanking plate MHAP1
3 Fitting QSM-...
Hole pattern on PCB
-H-
Note
The PCB is not included in the scope
of delivery.
Valve positions n
2
4
6
8
10
L1
±0.15
L2
L3
±0.1
L4
±0.1
42
62
82
102
122
10
30
50
70
90
37
57
77
97
117
28.6
48.6
68.6
88.6
108.6
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
15
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
Ordering data – 2/2-way valves
Electrical connection
Operating voltage
M3 connecting thread
Plugg connection at rear
5 V DC
12 V DC
24 V DC
5 V DC
12 V DC
24 V DC
5 V DC
12 V DC
24 V DC
Normally closed
Part No.
Type
197 045
197 046
197 047
197 048
197 049
197 050
197 051
197 052
197 053
MHP1-M4H-2/2G-M3-HC
MHP1-M5H-2/2G-M3-HC
MHP1-M1H-2/2G-M3-HC
MHP1-M4H-2/2G-M3-TC
MHP1-M5H-2/2G-M3-TC
MHP1-M1H-2/2G-M3-TC
MHP1-M4H-2/2G-M3-PI
MHP1-M5H-2/2G-M3-PI
MHP1-M1H-2/2G-M3-PI
Ordering data – Product-specific accessories
Designation
Part No.
Type
Valves with plug connection at rear or on top
Individual sub-base
Manifold block for …
2 valves
4 valves
6 valves
8 valves
10 valves
197 188
197 196
197 197
197 198
197 200
197 201
MHP1-AS-2-M3
MHP1-P2-2
MHP1-P4-2
MHP1-P6-2
MHP1-P8-2
MHP1-P10-2
Plugg connection on topp
Plugg connection underneath
Valves with plug connection underneath
Individual sub-base
Manifold block
2 valves
with pplugg bases for …
4 valves
6 valves
8 valves
10 valves
16
-H-
Type 2/2G and type 3/2O valves
must not be mixed on a manifold
block.
-H197 190
197 217
197 218
197 219
197 220
197 221
MHP1-AS-2-M3-PI
MHP1-P2-2-PI
MHP1-P4-2-PI
MHP1-P6-2-PI
MHP1-P8-2-PI
MHP1-P10-2-PI
Internet: www.festo.com/catalogue/...
Note
Note
Manifold blocks with an uneven
number of valves and for 11 ... 22
valves as well as further variants
can be configured and ordered
using the MH1 modular product
system.
Subject to change – 2010/01
Solenoid valves MHP1, miniature
Technical data – Semi in-line valve
Ordering data – 3/2-way valves
Electrical
Operating
p
g Normally closed
connection
voltage
Part No.
Type
Normally open
Part No.
Type
M3 connecting thread
Plugg connection at 5 V DC
rear
12 V DC
24 V DC
Plugg connection
5 V DC
on topp
12 V DC
24 V DC
Plugg connection
5 V DC
underneath
12 V DC
24 V DC
197 027
197 028
197 029
197 030
197 031
197 032
197 033
197 034
197 035
197 009
197 010
197 011
197 012
197 013
197 014
197 015
197 016
197 017
MHP1-M4H-3/2G-M3-HC
MHP1-M5H-3/2G-M3-HC
MHP1-M1H-3/2G-M3-HC
MHP1-M4H-3/2G-M3-TC
MHP1-M5H-3/2G-M3-TC
MHP1-M1H-3/2G-M3-TC
MHP1-M4H-3/2G-M3-PI
MHP1-M5H-3/2G-M3-PI
MHP1-M1H-3/2G-M3-PI
MHP1-M4H-3/2O-M3-HC
MHP1-M5H-3/2O-M3-HC
MHP1-M1H-3/2O-M3-HC
MHP1-M4H-3/2O-M3-TC
MHP1-M5H-3/2O-M3-TC
MHP1-M1H-3/2O-M3-TC
MHP1-M4H-3/2O-M3-PI
MHP1-M5H-3/2O-M3-PI
MHP1-M1H-3/2O-M3-PI
Ordering data – Product-specific accessories
Designation
Part No.
Type
Valves with plug connection at rear or on top
Individual sub-base
Manifold block for …
2 valves
4 valves
6 valves
8 valves
10 valves
197 184
197 191
197 192
197 193
197 194
197 195
MHP1-AS-3-M3
MHP1-PR2-3
MHP1-PR4-3
MHP1-PR6-3
MHP1-PR8-3
MHP1-PR10-3
Valves with plug connection underneath
Individual sub-base
Manifold block
2 valves
with pplugg bases for …
4 valves
6 valves
8 valves
10 valves
Manifold block
4 valves
with pplugg bases and electrical
6 valves
multi-pin
p plug
p g for …
8 valves
10 valves
Manifold block
2 valves
for mountingg on PCB for …
4 valves
6 valves
8 valves
10 valves
197 186
197 212
197 213
197 214
197 215
197 216
197 233
197 234
197 235
197 236
197 242
197 243
197 244
197 245
197 246
MHP1-AS-3-M3-PI
MHP1-PR2-3-PI
MHP1-PR4-3-PI
MHP1-PR6-3-PI
MHP1-PR8-3-PI
MHP1-PR10-3-PI
MHP1-PR4-3-PI-D9
MHP1-PR6-3-PI-D9
MHP1-PR8-3-PI-D9
MHP1-PR10-3-PI-D25
MHP1-PR2-3-PI-PCB
MHP1-PR4-3-PI-PCB
MHP1-PR6-3-PI-PCB
MHP1-PR8-3-PI-PCB
MHP1-PR10-3-PI-PCB
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
-H-
Note
Type 3/2G and type 3/2O valves
must not be mixed on a manifold
block.
-H-
Note
Manifold blocks with an uneven
number of valves and for 11 ... 22
valves as well as further variants
can be configured and ordered
using the MH1 modular product
system.
17
Solenoid valves MHA1, miniature
Peripherals overview – Sub-base valve, valve manifold
Plug connection at rear …-HC, plug connection on top …-TC
5
6
5
5
4
3
2
1
aB
aJ
9
8
7
7
8
aA
8
aB
Accessories
Page/Internet
Page/Internet
1
2
3
4
Sub-base valve MHA1-…-HC
Sub-base valve MHA1-…-TC
Sub-base valve MHA1-…-HC with LED
Sub-base valve MHA1-…-TC with LED
20
20
28
28
7
8
9
aJ
5
6
Plug socket with cable KMH
Inscription label MH-BZ-80X
37
37
aA
aB
18
Internet: www.festo.com/catalogue/...
Push-in fittings QS/QSM
Silencer UC
Individual sub-base MHA1-AS-3-M3
Blanking plate MHAP1-BP-3 for sealing vacant
positions
Manifold block MHA1-PR…-3
Blanking plug B
qs
uc
22
37
22
37
Subject to change – 2010/01
Solenoid valves MHA1, miniature
Peripherals overview – Sub-base valve, valve terminal
Plug connection underneath …-PI
3
1
2
4
5
6
aB
aC
3
aA
aD
aA
aA
7
8
9
aC
aJ
aC
aD
aE
aD
Accessories
Page/Internet
Page/Internet
1
Sub-base valve MHA1-...-PI with LED
28
9
2
Sub-base valve MHA1-...-PI
20
aJ
3
4
5
6
Inscription label MH-BZ-80X
Plug base MHAP-PI
Soldering base PCBC-A
Individual sub-base MHA1-AS-3-M3-PI
with plug base
Manifold block MHA1-PR…-3-M3-PI
with plug bases
Manifold block MHA1-PR…-3-M3-PI-D…
with plug bases and electrical multi-pin plug
37
37
37
22
22
7
8
2010/01 – Subject to change
25
aA
aB
aC
aD
Manifold block MHA1-PR…-3-M3-PI-PCB
for mounting on PCB
Manifold block MHA1-PR…-3-M3-PI-PCBM
for mounting on PCB
with pneumatic multiple connector plate
Silencer UC
Blanking plate MHAP1 for sealing vacant positions
Blanking plug B
Push-in fittings QS
aE
PCB (user-specific)
25
25
uc
37
37
qs
24
Internet: www.festo.com/catalogue/...
19
Solenoid valves MHA1, miniature
Technical data – Sub-base valve
-P-
Function
-L-Q-
Voltage
5, 12, 24 V DC
Pressure
–0.9 … +8 bar
Temperature range
–5 … +50 °C
General technical data
Valve function
2/2-way, single solenoid
Constructional design
Sealing principle
Actuation type
Reset method
Type of pilot control
Direction of flow
Exhaust function
Manual override
Type of mounting
Mounting position
Nominal size
Standard nominal flow rate
Grid dimension
Pneumatic
Individual sub-base
connection
Manifold assemblyy
Product weight
[mm]
[l/min]
[mm]
1, 33
2
3, 11
1, 33
2
3, 11
[g]
Operating and environmental conditions
Valve function
1)
2)
20
With flow control
0.65
10
10
M3
M3
M3
M7 (PCB: M5)
M3
M7 (PCB: M5)
10
2/2-way, single solenoid
3/2-way, single solenoid
Filtered compressed air,
lubricated or unlubricated,
unlubricated
grade of filtration 40 µm
[bar]
[bar]
[°C]
[°C]
[°C]
Filtered compressed air,
lubricated or unlubricated,
unlubricated
grade of filtration 40 µm
Vacuum, grade of filtration 40 µm
–0.9 … +2
–
–5 … +50
–5 … +40
–5 … +50
[°C]
–5 … +40
[°C]
–20 … +60
22)
Operating medium
Operating
p
g ppressure Normally closed
range
Normally open
Ambient
Individual mounting
temperature
Manifold assembly
Temperature
Individual mounting
of medium
Temperature
Manifold assembly
of medium
Storage temperature
Corrosion resistance class CRC
Poppet valve with spring return
Soft
Electric
Mechanical spring
Direct
Non-reversible
–
Non-detenting
On sub-base via through-holes
Any
0.9
14 (2 bar > 0 bar)
10
M3
–
M3
M7
–
M7
10
3/2-way, single solenoid
0 … 81)
0 … 61)
Vacuum operation possible with special connection method
Corrosion resistance class 2 as per Festo standard 940 070
Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or
lubricating agents.
Internet: www.festo.com/catalogue/...
Subject to change – 2010/01
Solenoid valves MHA1, miniature
Technical data – Sub-base valve
Electrical data
Valve function
2/2-way, single solenoid
Operating voltage
Type of connection
Power consumption
Duty cycle
[V DC]
[W]
[%]
Protection class to EN 60529
With plug socket KMH
With plug base MHAP-PI
With soldering base PCBC-A
With Sub-D connector plug
3/2-way, single solenoid
5 ±10%, 12 ±10% or 24 ±10%
Plug connection
1
100
IP40
Response times and switching frequencies
Valve function
Response time on/off
Maximum switching frequency
[ms]
[Hz]
2/2-way, single solenoid
3/2-way, single solenoid
4/5
20
4/4
Materials
1
2
1
2
3
4
–
4
3
Housing
Sub-base
Plug base
Coil housing
Seals
Note on materials
Download CAD data www.festo.com
Dimensions
Plug connection on top
Polyphenylene sulphide
Aluminium
Polyamide
Polyamide
Fluoro elastomer,
nitrile rubber,
hydrogenated nitrile rubber
Free of copper and PTFE
Plug connection at rear
Plug connection underneath
1 Plug socket KMH-…
2 Manual override
3 Coding pin
Hole pattern on sub-bases
-H1 Hole for coding pin
2010/01 – Subject to change
Note
If used as a 2/2-way valve, normally
closed, port 3/11 is not used.
Internet: www.festo.com/catalogue/...
If used as a 2/2-way valve, normally
open, port 1/33 is not used.
21
Solenoid valves MHA1, miniature
Technical data – Sub-base valve
Download CAD data www.festo.com
Dimensions – 2/2-way valve
Individual sub-base
1
2
3
4
5
Plug base MHAP-PI
Fitting QSM-...
Plug connection on top
Plug connection at rear
Plug connection underneath
1
2
3
4
5
6
Plug base MHAP-PI
Blanking plate MHAP1
Fitting QSM-...
Plug connection on top
Plug connection at rear
Plug connection underneath
Manifold assembly
Valve positions n
2
3
4
5
6
7
8
22
L1
±0.15
L2
±0.1
L3
Valve positions n
35
45
55
65
75
85
95
27
37
47
57
67
77
87
10
20
30
40
50
60
70
9
10
11
12
13
14
15
L1
±0.15
L2
±0.1
L3
105
115
125
135
145
155
165
97
107
117
127
137
147
157
80
90
100
110
120
130
140
Internet: www.festo.com/catalogue/...
Valve positions n
16
17
18
19
20
21
22
L1
±0.15
L2
±0.1
L3
175
185
195
205
215
225
235
167
177
187
197
207
217
227
150
160
170
180
190
200
210
Subject to change – 2010/01
Solenoid valves MHA1, miniature
Technical data – Sub-base valve
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Individual sub-base
1
2
3
4
5
Plug base MHAP-PI
Fitting QSM-...
Plug connection on top
Plug connection at rear
Plug connection underneath
1
2
3
4
5
6
7
Plug base MHAP-PI
Blanking plate MHAP1
Fitting QSM-...
Silencer
Plug connection on top
Plug connection at rear
Plug connection underneath
Manifold assembly
Valve positions n
2
3
4
5
6
7
8
L1
±0.15
L2
±0.1
L3
Valve positions n
35
45
55
65
75
85
95
27
37
47
57
67
77
87
10
20
30
40
50
60
70
9
10
11
12
13
14
15
2010/01 – Subject to change
L1
±0.15
L2
±0.1
L3
105
115
125
135
145
155
165
97
107
117
127
137
147
157
80
90
100
110
120
130
140
Valve positions n
16
17
18
19
20
21
22
Internet: www.festo.com/catalogue/...
L1
±0.15
L2
±0.1
L3
175
185
195
205
215
225
235
167
177
187
197
207
217
227
150
160
170
180
190
200
210
23
Solenoid valves MHA1, miniature
Technical data – Sub-base valve
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Manifold assembly with electrical multi-pin plug
1 Plug base MHAP-PI
2 Sub-D plug, plug exit on top
(standard)
3 Blanking plate MHAP1
4 Fitting QSM-...
5 Silencer
Valve positions n
2
4
6
8
L1
±0.15
L2
±0.1
L3
Valve positions n
70
90
110
130
63
83
103
123
10
30
50
70
10
12
14
16
L1
±0.15
L2
±0.1
L3
172
192
212
232
165
185
205
225
90
110
130
150
Valve positions n
18
20
22
L1
±0.15
L2
±0.1
L3
252
272
292
245
265
285
170
190
210
Electrical multi-pin plug – Plug directions
To pneumatic side
24
To electrical side
To top (standard)
Internet: www.festo.com/catalogue/...
Subject to change – 2010/01
Solenoid valves MHA1, miniature
Technical data – Sub-base valve
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Manifold assembly on PCB
1 Soldering base PCBC-A-...
2 Blanking plate MHAP1
3 Fitting QSM-...
-H-
Note
The PCB is not included in the scope
of delivery.
Hole pattern on PCB 26
Manifold assembly with pneumatic multiple connector plate on PCB
1
2
3
4
Soldering base PCBC-A-...
Blanking plate MHAP1
Fitting QSM-...
Removable pneumatic multiple
connector plate
-H-
Note
The PCB is not included in the scope
of delivery.
Hole pattern on PCB 26
Valve positions n
2
4
6
8
10
L1
±0.15
L2
L3
±0.1
L5
±0.15
L6
L7
±0.1
L8
±0.2
L9
±0.1
42
62
82
102
122
10
30
50
70
90
37
57
77
97
117
–
46.7
66.7
86.7
106.7
–
68
88
108
128
–
71
91
111
131
–
75
95
115
135
–
38
58
78
98
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
25
Solenoid valves MHA1, miniature
Technical data – Sub-base valve
Dimensions
Hole pattern on PCB
-H-
Note
The PCB is not included in the scope
of delivery.
Ordering data – 2/2-way valves
Electrical connection
Operating
p
g voltage
g
M3 connecting thread
Plugg connection at rear
5 V DC
12 V DC
24 V DC
5 V DC
12 V DC
24 V DC
5 V DC
12 V DC
24 V DC
Normally closed
Part No.
Type
197 036
197 037
197 038
197 039
197 040
197 041
197 042
197 043
197 044
MHA1-M4H-2/2G-0,9-HC
MHA1-M5H-2/2G-0,9-HC
MHA1-M1H-2/2G-0,9-HC
MHA1-M4H-2/2G-0,9-TC
MHA1-M5H-2/2G-0,9-TC
MHA1-M1H-2/2G-0,9-TC
MHA1-M4H-2/2G-0,9-PI
MHA1-M5H-2/2G-0,9-PI
MHA1-M1H-2/2G-0,9-PI
Ordering data – Product-specific accessories
Designation
Part No.
Type
Valves with plug connection at rear or on top
Individual sub-base
Manifold block for …
2 valves
4 valves
6 valves
8 valves
10 valves
197 187
197 207
197 208
197 209
197 210
197 211
MHA1-AS-2-M3
MHA1-P2-2-M3
MHA1-P4-2-M3
MHA1-P6-2-M3
MHA1-P8-2-M3
MHA1-P10-2-M3
Plugg connection on topp
Plugg connection underneath
Valves with plug connection underneath
Individual sub-base
Manifold block
2 valves
with pplugg bases for …
4 valves
6 valves
8 valves
10 valves
26
-H-
Type 3/2G and type 3/2O valves
must not be mixed on a manifold
block.
-H197 189
197 227
197 228
197 229
197 230
197 231
MHA1-AS-2-M3-PI
MHA1-P2-2-M3-PI
MHA1-P4-2-M3-PI
MHA1-P6-2-M3-PI
MHA1-P8-2-M3-PI
MHA1-P10-2-M3-PI
Internet: www.festo.com/catalogue/...
Note
Note
Manifold blocks with an uneven
number of valves and for 11 ... 22
valves as well as further variants
can be configured and ordered
using the MH1 modular product
system.
Subject to change – 2010/01
Solenoid valves MHA1, miniature
Technical data – Sub-base valve
Ordering data – 3/2-way valves
Electrical
Operating
p
g Normally closed
connection
voltage
Part No.
Type
Normally open
Part No.
Type
M3 connecting thread
Plugg connection
5 V DC
at rear
12 V DC
24 V DC
Plugg connection
5 V DC
on topp
12 V DC
24 V DC
Plugg connection
5 V DC
underneath
12 V DC
24 V DC
197 018
197 019
197 020
197 021
197 022
197 023
197 024
197 025
197 026
197 000
197 001
197 002
197 003
197 004
197 005
197 006
197 007
197 008
MHA1-M4H-3/2G-0,6-HC
MHA1-M5H-3/2G-0,6-HC
MHA1-M1H-3/2G-0,6-HC
MHA1-M4H-3/2G-0,6-TC
MHA1-M5H-3/2G-0,6-TC
MHA1-M1H-3/2G-0,6-TC
MHA1-M4H-3/2G-0,6-PI
MHA1-M5H-3/2G-0,6-PI
MHA1-M1H-3/2G-0,6-PI
MHA1-M4H-3/2O-0,6-HC
MHA1-M5H-3/2O-0,6-HC
MHA1-M1H-3/2O-0,6-HC
MHA1-M4H-3/2O-0,6-TC
MHA1-M5H-3/2O-0,6-TC
MHA1-M1H-3/2O-0,6-TC
MHA1-M4H-3/2O-0,6-PI
MHA1-M5H-3/2O-0,6-PI
MHA1-M1H-3/2O-0,6-PI
Ordering data – Product-specific accessories
Designation
Part No.
Type
Valves with plug connection at rear or on top
Individual sub-base
Manifold block for …
2 valves
4 valves
6 valves
8 valves
10 valves
197 183
197 202
197 203
197 204
197 205
197 206
MHA1-AS-3-M3
MHA1-PR2-3-M3
MHA1-PR4-3-M3
MHA1-PR6-3-M3
MHA1-PR8-3-M3
MHA1-PR10-3-M3
Valves with plug connection underneath
Individual sub-base
Manifold block
2 valves
with pplugg bases for …
4 valves
6 valves
8 valves
10 valves
Manifold block
4 valves
with pplugg bases and electrical
6 valves
multi-pin
p plug
p g for …
8 valves
10 valves
Manifold block
2 valves
for mountingg on PCB for …
4 valves
6 valves
8 valves
10 valves
Manifold block
4 valves
for mountingg on PCB with pneup
6 valves
matic multiple
p connector plate
p
8 valves
for …
10 valves
197 185
197 222
197 223
197 224
197 225
197 226
197 238
197 239
197 240
197 241
197 247
197 248
197 249
197 250
197 251
197 253
197 254
197 255
197 256
MHA1-AS-3-M3-PI
MHA1-PR2-3-M3-PI
MHA1-PR4-3-M3-PI
MHA1-PR6-3-M3-PI
MHA1-PR8-3-M3-PI
MHA1-PR10-3-M3-PI
MHA1-PR4-3-M3-PI-D9
MHA1-PR6-3-M3-PI-D9
MHA1-PR8-3-M3-PI-D9
MHA1-PR10-3-M3-PI-D25
MHA1-PR2-3-M3-PI-PCB
MHA1-PR4-3-M3-PI-PCB
MHA1-PR6-3-M3-PI-PCB
MHA1-PR8-3-M3-PI-PCB
MHA1-PR10-3-M3-PI-PCB
MHA1-PR4-3-PI-PCBM
MHA1-PR6-3-PI-PCBM
MHA1-PR8-3-PI-PCBM
MHA1-PR10-3-PI-PCBM
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
-H-
Note
Type 3/2G and type 3/2O valves
must not be mixed on a manifold
block.
-H-
Note
Manifold blocks with an uneven
number of valves and for 11 ... 22
valves as well as further variants
can be configured and ordered
using the MH1 modular product
system.
27
-V- New
Solenoid valves MHA1, miniature
Technical data – Sub-base valve with LED
-P-
Function
-L-Q-
Voltage
24 V DC
Pressure
0 … +8 bar
Temperature range
–5 … +50 °C
General technical data
Valve function
3/2-way, single solenoid
Constructional design
Sealing principle
Actuation type
Reset method
Type of pilot control
Direction of flow
Exhaust function
Manual override
Signal status display
Type of mounting
Mounting position
Nominal size
Standard nominal flow rate
Grid dimension
Pneumatic
Individual sub-base
connection
Manifold assemblyy
Product weight
[mm]
[l/min]
[mm]
1, 33
2
3, 11
1, 33
2
3, 11
[g]
Operating and environmental conditions
Valve function
Operating medium
Operating
p
g ppressure Normally closed
range
Normally open
Ambient
Individual mounting
temperature
Manifold assembly
Temperature
p
Individual mounting
of medium
Manifold assembly
Storage temperature
Corrosion resistance class CRC
1)
2)
28
Poppet valve with spring return
Soft
Electric
Mechanical spring
Direct
Non-reversible
With flow control
Non-detenting/detenting
LED
On sub-base via through-holes
Any
0.65
10
10
M3
M3
M3
M7
M3
M7
11
3/2-way, single solenoid
[bar]
[bar]
[°C]
[°C]
[°C]
[°C]
[°C]
Filtered compressed air,
air lubricated or unlubricated,
unlubricated grade of filtration 40 µm
0 … 81)
0 … 61)
–5 … +50
–5 … +40
–5 … +50
–5 … +40
–20 … +60
22)
Vacuum operation possible with special connection method
Corrosion resistance class 2 as per Festo standard 940 070
Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or
lubricating agents.
Internet: www.festo.com/catalogue/...
Subject to change – 2010/01
-V- New
Solenoid valves MHA1, miniature
Technical data – Sub-base valve with LED
Electrical data
Valve function
3/2-way, single solenoid
Operating voltage
Type of connection
Power consumption
[V DC]
[W]
Protection class to EN 60529
With plug socket KMH
With plug base MHAP-PI
With soldering base PCBC-A
With Sub-D connector plug
24 ±10%
Plug connection
1.1
IP40
Response times and switching frequencies
Valve function
Response time on/off
Maximum switching frequency
3/2-way, single solenoid
[ms]
[Hz]
4/4
20
Materials
1
2
4
3
1
2
3
4
–
Housing
Sub-base
Plug base
Coil housing
Seals
Note on materials
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
Polyphenylene sulphide
Aluminium
Polyamide
Polyamide
Fluoro elastomer,
nitrile rubber,
hydrogenated nitrile rubber
Free of copper and PTFE
29
-V- New
Solenoid valves MHA1, miniature
Technical data – Sub-base valve with LED
Download CAD data www.festo.com
Dimensions
Plug connection on top
Plug connection at rear
Plug connection underneath
1 Plug socket KMH-…
2 Manual override
3 Coding pin
Hole pattern on sub-bases
-H1 Hole for coding pin
30
Internet: www.festo.com/catalogue/...
Note
If used as a 2/2-way valve, normally
closed, port 3/11 is not used.
If used as a 2/2-way valve, normally
open, port 1/33 is not used.
Subject to change – 2010/01
-V- New
Solenoid valves MHA1, miniature
Technical data – Sub-base valve with LED
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Individual sub-base
1
2
3
4
5
Plug base MHAP-PI
Fitting QSM-...
Plug connection on top
Plug connection at rear
Plug connection underneath
1
2
3
4
5
6
7
Plug base MHAP-PI
Blanking plate MHAP1
Fitting QSM-...
Silencer
Plug connection on top
Plug connection at rear
Plug connection underneath
Manifold assembly
Valve positions n
2
3
4
5
6
7
8
L1
±0.15
L2
±0.1
L3
Valve positions n
35
45
55
65
75
85
95
27
37
47
57
67
77
87
10
20
30
40
50
60
70
9
10
11
12
13
14
15
2010/01 – Subject to change
L1
±0.15
L2
±0.1
L3
105
115
125
135
145
155
165
97
107
117
127
137
147
157
80
90
100
110
120
130
140
Valve positions n
16
17
18
19
20
21
22
Internet: www.festo.com/catalogue/...
L1
±0.15
L2
±0.1
L3
175
185
195
205
215
225
235
167
177
187
197
207
217
227
150
160
170
180
190
200
210
31
-V- New
Solenoid valves MHA1, miniature
Technical data – Sub-base valve with LED
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Manifold assembly with electrical multi-pin plug
1 Plug base MHAP-PI
2 Sub-D plug, plug exit on top
(standard)
3 Blanking plate MHAP1
4 Fitting QSM-...
5 Silencer
Valve positions n
2
4
6
8
L1
±0.15
L2
±0.1
L3
Valve positions n
70
90
110
130
63
83
103
123
10
30
50
70
10
12
14
16
L1
±0.15
L2
±0.1
L3
172
192
212
232
165
185
205
225
90
110
130
150
Valve positions n
18
20
22
L1
±0.15
L2
±0.1
L3
252
272
292
245
265
285
170
190
210
Electrical multi-pin plug – Plug directions
To pneumatic side
32
To electrical side
To top (standard)
Internet: www.festo.com/catalogue/...
Subject to change – 2010/01
-V- New
Solenoid valves MHA1, miniature
Technical data – Sub-base valve with LED
Download CAD data www.festo.com
Dimensions – 3/2-way valve
Manifold assembly on PCB
1 Soldering base PCBC-A-...
2 Blanking plate MHAP1
3 Fitting QSM-...
-H-
Note
The PCB is not included in the scope
of delivery.
Hole pattern on PCB 34
Manifold assembly with pneumatic multiple connector plate on PCB
1
2
3
4
Soldering base PCBC-A-...
Blanking plate MHAP1
Fitting QSM-...
Removable pneumatic multiple
connector plate
-H-
Note
The PCB is not included in the scope
of delivery.
Hole pattern on PCB 34
Valve positions n
2
4
6
8
10
L1
±0.15
L2
L3
±0.1
L5
±0.15
L6
L7
±0.1
L8
±0.2
L9
±0.1
42
62
82
102
122
10
30
50
70
90
37
57
77
97
117
–
46.7
66.7
86.7
106.7
–
68
88
108
128
–
71
91
111
131
–
75
95
115
135
–
38
58
78
98
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
33
-V- New
Solenoid valves MHA1, miniature
Technical data – Sub-base valve with LED
Dimensions
Hole pattern on PCB
-H-
Note
The PCB is not included in the scope
of delivery.
Ordering data – 3/2-way valves
Electrical
Operating
p
g Normally closed
connection
voltage
Part No.
Type
M3 connecting thread
Plug connection 24 V DC
at rear
Plug connection 24 V DC
on top
Plug connection 24 V DC
underneath
Normally open
Part No.
Type
540 443
MHA1-M1LH-3/2G-0,6-HC
540 440
MHA1-M1LH-3/2O-0,6-HC
540 444
MHA1-M1LH-3/2G-0,6-TC
540 441
MHA1-M1LH-3/2O-0,6-TC
540 445
MHA1-M1LH-3/2G-0,6-PI
540 442
MHA1-M1LH-3/2O-0,6-PI
Ordering data – Product-specific accessories
Designation
Part No.
Type
Valves with plug connection at rear or on top
Individual sub-base
Manifold block for …
2 valves
4 valves
6 valves
8 valves
10 valves
197 183
197 202
197 203
197 204
197 205
197 206
MHA1-AS-3-M3
MHA1-PR2-3-M3
MHA1-PR4-3-M3
MHA1-PR6-3-M3
MHA1-PR8-3-M3
MHA1-PR10-3-M3
Valves with plug connection underneath
Individual sub-base
Manifold block
2 valves
with pplugg bases for …
4 valves
6 valves
8 valves
10 valves
Manifold block
4 valves
with pplugg bases and electrical
6 valves
multi-pin
p plug
p g for …
8 valves
10 valves
Manifold block
2 valves
for mountingg on PCB for …
4 valves
6 valves
8 valves
10 valves
Manifold block
4 valves
for mountingg on PCB with
6 valves
ppneumatic multiple
p connector
8 valves
plate for …
10 valves
197 185
197 222
197 223
197 224
197 225
197 226
197 238
197 239
197 240
197 241
197 247
197 248
197 249
197 250
197 251
197 253
197 254
197 255
197 256
MHA1-AS-3-M3-PI
MHA1-PR2-3-M3-PI
MHA1-PR4-3-M3-PI
MHA1-PR6-3-M3-PI
MHA1-PR8-3-M3-PI
MHA1-PR10-3-M3-PI
MHA1-PR4-3-M3-PI-D9
MHA1-PR6-3-M3-PI-D9
MHA1-PR8-3-M3-PI-D9
MHA1-PR10-3-M3-PI-D25
MHA1-PR2-3-M3-PI-PCB
MHA1-PR4-3-M3-PI-PCB
MHA1-PR6-3-M3-PI-PCB
MHA1-PR8-3-M3-PI-PCB
MHA1-PR10-3-M3-PI-PCB
MHA1-PR4-3-PI-PCBM
MHA1-PR6-3-PI-PCBM
MHA1-PR8-3-PI-PCBM
MHA1-PR10-3-PI-PCBM
34
Internet: www.festo.com/catalogue/...
-H-
Note
Type 3/2G and type 3/2O valves
must not be mixed on a manifold
block.
-H-
Note
Manifold blocks with an uneven
number of valves and for 11 ... 22
valves as well as further variants
can be configured and ordered
using the MH1 modular product
system.
Subject to change – 2010/01
-V- New
Solenoid valves MHA1, miniature
Technical data – 2x2/2-way sub-base valve with LED
-P-
Function
-L-Q-
2x2/2-way valve
Voltage
24 V DC
Pressure
– 0.95 … +1.5 bar
Temperature range
–5 … +50 °C
General technical data
Valve function
2/2-way, single solenoid
Constructional design
Sealing principle
Actuation type
Reset method
Type of pilot control
Direction of flow
Exhaust function
Manual override
Signal status display
Type of mounting
Mounting position
Nominal size
Standard nominal flow rate
Width
Grid dimension
Pneumatic connection
[mm]
[l/min]
[mm]
[mm]
1
11
2
Operating and environmental conditions
Valve function
Operating medium
Operating
p
g ppressure
Port 1
Port 11
Ambient temperature
Temperature of medium
Storage temperature
Corrosion resistance class CRC
1)
Poppet valve with spring return
Soft
Electric
Mechanical spring
Direct
Non-reversible
No flow control
Non-detenting
LED
On sub-base via through-holes
Any
1.5
30
10
10
–
–
–
2/2-way, single solenoid
[bar]
[bar]
[°C]
[°C]
[°C]
2x2/2-way, single solenoid
Via through-holes
20
QS3, QS4
QS3, QS4
QS3, QS4
2x2/2-way, single solenoid
Filtered compressed air,
air lubricated or unlubricated,
unlubricated grade of filtration 40 µm
0 … 1.5
– 0.95 … 0
–5 … +50
–5 … +50
–20 … +60
21)
Corrosion resistance class 2 as per Festo standard 940 070
Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants or
lubricating agents.
Electrical data
Valve function
Operating voltage
Type of connection
Power consumption
Max. length of connecting cable
Protection class to EN 60529
With plug socket KMH
2010/01 – Subject to change
2/2-way, single solenoid
[V DC]
[W]
[m]
2x2/2-way, single solenoid
24 ±10%
Plug connection
3, following current reduction 0.7
30
IP40
Internet: www.festo.com/catalogue/...
35
-V- New
Solenoid valves MHA1, miniature
Technical data – 2x2/2-way sub-base valve with LED
Response times and switching frequencies
Valve function
Response time on/off
Maximum switching frequency
2/2-way, single solenoid
[ms]
[Hz]
2x2/2-way, single solenoid
6/2
10
Materials
1
–
–
1
Housing
Screws
Seals
Note on materials
Reinforced PA, reinforced PPS
Steel
HNBR, NBR
Free of copper and PTFE
RoHS-compliant
Download CAD data www.festo.com
Dimensions – 2/2-way valve
1 Plug socket KMH-…
3 Coding pin
Download CAD data www.festo.com
Dimensions – 2x2/2-way valve
1 Push-in fitting 2
2 Push-in fitting 1
3 Push-in fitting 11
Ordering data – 2x2/2-way valve
Circuit symbol
Normal position
Push-in fitting for 1/11/2
[mm]
Weight
[g]
Part No.
Type
2x closed
4/4/3
30.6
560 372
MHA1-2X2/2G-1,5-4-4-3
4/4/4
30.6
566 175
MHA1-2X2/2G-1,5-4-4-4
3/3/3
30.6
562 051
MHA1-2X2/2G-1,5-3-3-3
–
10
557 864
MHA1-M1LCH-2/2G-1.5-HC
2x2/2-way valve
2/2-way valve
Closed
36
Internet: www.festo.com/catalogue/...
Subject to change – 2010/01
Solenoid valves MH1, miniature
Accessories
Part No.
Type
Soldering base
197 261
PCBC-A-101)
197 262
PCBC-A-1002)
197 260
MHAP-PI
M5
3843
B-M54)
M7
174 309
B-M74)
Plug base (IP40)
Plug socket with cable (IP40)
0.5 m
1m
Part No.
Type
197 263
KMH-0,5
197 264
KMH-1
197 259
MH-BZ-80X3)
197 257
MHAP1-BP-3
197 258
MHAP1-BP-3-PI
Inscription label
Blanking plug B
Blanking plate
Silencer UC
Plug
connection
Plug base
Push-in fittings QS/QSM
Internet: uc
Connecting cable KMP6 (up to 8 valves)
2.5 m
531 184
5m
531 185
10 m
531 186
KMP6-09P-8-2,5
KMP6-09P-8-5
KMP6-09P-8-10
Connecting cable KMP6 (up to 22 valves)
2.5 m
530 046
5m
530 047
10 m
530 048
KMP6-25P-22-2,5
KMP6-25P-22-5
KMP6-25P-22-10
Internet: quick star
Connecting cable KMP6 (up to 12 valves)
2.5 m
530 049
5m
530 050
10 m
530 051
KMP6-25P-12-2,5
KMP6-25P-12-5
KMP6-25P-12-10
1) Scope of delivery 10 pieces
2) Scope of delivery 100 pieces
3) Scope of delivery 80 pieces
4) Scope of delivery 10 pieces
2010/01 – Subject to change
Internet: www.festo.com/catalogue/...
37