Retractable Screen Measuring Instructions
STEP 1
Select the continuous flat surface (door jamb)
around the entire door frame. The surface must
have at least 1” of clearance for the frame housing
components to be installed on the hinged side of the
door. All other sides of the door frame require at
least 15/16” clearance for a trouble-free installation
of your Casper Disappearing retractable door screen.
STEP 2
Next, measure both the height and width of door
frame's mounting surface to the nearest 1/16".
STEP 3
The height should be measured on the "hinged" side
of the door frame.
Door Frame Height: (1) _______
(2) _______
STEP 4
The width should be measured twice; once at the top
of the door frame and once at the bottom of the
door frame.
Door Frame Width (top):
(1)________
Door Frame Width (bottom): (1)______
(2) ________
(2) ______
STEP 5
Repeat steps 3 & 4 to make sure the first measurement was correct.
CasperScreens.com
877-745-5525