UNIPRESS Family Overview
Status: November 28, 2014
UNIPRESS 500M
Flat
UNIPRESS 500M
UNIPRESS 500M ++
UNIPRESS 500PP
UNIPRESS 500
Compact
UNIPRESS 500E
UNIPRESS 500E
UNIPRESS 1000
Compact
Picture
Description
Manual Press
Manual Press
PAY483
PAY 486
Servo- Controlled Press with
flat bed
PAY 326
Servo- Controlled Press with Fixed
Anvil
PAY268A2
Servo- Controlled Press with a
Rising Post
PAY284A2
Semi-Automatic Press
Maximum Press force
Insertion tooling exchange
Board stuffing
Board positioning
PAY485 (With a fixed flat tool of 100mm)
PAY480 (with tool interface)
32 kN
Manually
Manually
Manually
Manual Press with insertion
force measurement system
PAY 23083
Pneumatic Portal Press
Cat. N°.
32 kN
Manually
Manually
Manually
32 kN
Manually
Manually
Manually
56 kN
Manually
Manually
Manually
25 kN
Manually
Manually
Manually
50 kN [100 kN is also available]
Manually
Manually
Manually
50 kN [100 kN is also available]
Manually
Manually
Automatically
Board support
With a flat bed
With a flat bed
No / optionally
Throat Depth 300 mm
With an anvil op optionally with
a flat bed
Yes
Throat Depth 300 mm
With a flat bed
Insertion force control system
Maximal board size
With an anvil or optionally with a
flat bed
No
Throat Depth 300 mm
Yes
Flat Bed 480 mm x 520 mm
Yes
600 mm between the posts of
the H- Bridge
With anvil or optionally with a flat
bed
Yes
720 x 580 mm
50 kN [100 kN is also available]
Manually
Manually
Manually or optionally with the
LMT- System
With an anvil
Yes
720 x 580 mm
Yes
On request
UNIPRESS
1000XXL
UNIPRESS 2000R
PAH 23095
With an anvil or backing board
(X stroke: 500 mm / Y stroke: 300 mm)
Föhrenbach Application Tooling Designs and Manufactures Insertion Tooling
for quite all Types of Press-Fit Connectors
Picture
Description
Semi-Automatic Press
Cat. N°.
Maximum Press force
Insertion tooling exchange
PAH 156
50 kN
Manually or optionally with an
automatic tool exchanger
Manually
Automatically
With an anvil or a backing
board
Yes
1200 x 625 mm
Board stuffing
Board positioning
Board support
Insertion force control system
Maximal board size
Fully Automatic Insertion and Press
Machine
PAH 23057
22 kN
Automatically
Automatically
Automatically
With an anvil
Yes
On request
The technical data in this publication has been carefully checked and assembled. No liability from inaccuracies or errors is assumed. The right to change or improve this document without notice is reserved.
Föhrenbach Application Tooling N.V.
Krijgsbaan 128
B-2640 Mortsel (Antwerpen)
Belgium
Tel: +32 (0)3 216 19 98
Fax: +32 (0)3 216 15 07
e-mail: [email protected]
www.foehrenbach.be