Kalebodur Ceramic Tiles conform to the Turkish and European standards indicated below.
TEST REPORT
EN
TECHNICAL CHARACTERISTICS
ISO 10545-3
60*60
GMB-U876 GARDEN STONE
BEIGE DJ
N ≥ 15 cm ; The permissble deviation of the
average size for each tile from the work size (W)
± %0,6 & ± 2,00 mm
Length and width
ISO 10545-2
TURKISH and EUROPEAN STANDARD
TS-EN 14411
ANNEX-G UGL GROUP BIa
±%0.3
Thickness
±%5 / ±0,5 mm
±%4
Rectangularity
±%0,5 / ±2,0 mm
±%0,3
Straghtness of Sides
±%0,5 / ±1,5 mm
±%0,2
Surcafe Flatness
±%0,5 / ±2,0 mm
±%0,3
Water Absorbtion
≤ 0,5 % Individual max. %0,6
E < 0,10 %
Thickness ≥ 7,5 mm ; Not less than 1300
> 2000 N
Thickness < 7,5 mm ; Not less than 700
-
Min.35 Individual min.32
> 45 N/mm
Test method available
AFFIRMATIVE
Breaking strength,in N
ISO 10545-4
2
Modules of Rupture (N/mm )
2
ISO 10545-5
Impact resistance
ISO 10545-6
Resistance to Deep abrasion-Unglazed Tiles Only
ISO 10545-8
Linear Thermal Expansion Coefficient
Test method available
AFFIRMATIVE
ISO 10545-9
Resistance to Thermal Shock
Test method available
AFFIRMATIVE
Required
RESISTANT
manufacturer to state classification
ULA-ULA-ULA
ISO 10545-12
Frost Resistance
Max.175 mm
3
< 130 mm
3
Resistance to chemical
Resistance to low concantrations of acids and alkalis
unglazed tiles
ISO 10545-13
Resistance to high concantrations of acids and alkalis
unglazed tiles
Resistance to household chemicals and swimming pool salts
unglazed tiles
Test method available
UHA-UHA-UHA
Min.UB
UA-UA
Resistance to Staining
ISO 10545-14
DIN 51130
DIN 51097
unglazed tiles
Ramp Slip resistance (Oil / Wet)
QUALITY CONTROL LAB. TECHNICIAN
manufacturer to state classification
Where required
CLASS-5
R-10
CLASS-B
QUALITY CONTROL MANAGER