References
Pushing car
Project and produc. documentation
Beginning of operation
Place of realisation
Cost of the project
September 1994
October 1999
NOVÁ HUT, a.s., plant 4
1 million CZK
Charakteristics
For the needs of plant 4 - Energetika was designed and elaborated in
workshop documentation a pushing car serving for lifting of coal from
slot storage tank to coal tippler. In comparison with previous
machine, this machine has greater pushing capacity, revolutions of
pushing wheels are controlled by frequency converter and the car
has its own drive for the movement. Pushing car is designed for
remote control without the need of local operator.
Deep coal storage tank
Project and produc. documentation
Beginning of operation
Place of realisation
Cost of the project
September 1994
November 1997
NOVÁ HUT, a.s., plant 4
17 million CZK
Charakteristics
Project and construction design for overhaul of deep coal storage
tank in plant 46 - Heating plant, NOVÁ HUT, a.s., Ostrava.
Elaboration of documentation for new steel coal storage tank
including entirely new concept of lifting the coal using pushing car,
which continuously pushes material on evacuating conveyor belt.
Modernisation of longitudinal slit
line Siemag
Project and produc. documentation
Beginning of operation
Place of realisation
Cost of the project
March - July 1998
January 1999
NOVÁ HUT, a.s., plant 14
47 million CZK
Charakteristics
Longitudinal slit line slits steel bands rolled into coils longitudinally
into narrower bands, these are then again rolled into coils which are
transversely and circumferentially tied and transferred outside of the
line. Modernisation of the line consisted in construction of a new
system for transport of coils to the unrolling unit, processing of coils,
installation of new unrolling unit and rolling unit and installation of
new controlling system. Manufacture documentation of bearing units
of the line was elaborated for company ŽDAS, a.s., which was the
supplier and contractor.
NOVÁ HUT - Projekce, spol. s r.o.