FOR IMMEDIATE RELEASE:
Gary Vest
Owner- GVPro Production
Hang’em High Guitar Hangers
[email protected]
480-277-3711
www.hangemhigh.net
New guitar hanger that you can hang and display your guitar on the wall at an angle.
Phoenix, AZ August 30th 2008
GVPro Production has a new guitar hanger that you can hang and display your instrument on the
wall at an angle.
The HANG'em HIGH guitar hanger is a patent pending design made of a two-piece system that
is mounted on the wall so you can proudly display and hang your guitar or bass on your wall at an
ANGLE. The angle can be adjusted from 15 to 90 degrees.
It is designed for both right or left handed electric and acoustic guitars and basses with bodies
from 1 to 6 inches thick, with or without headstocks. Works great for Fender Strats, Gibson Les Pauls,
Jackson Kellys, Jackson RR V's, BC Rich Warlocks, Parker Fly's, Steinberger's etc.....
The Hang’em High hanger is the best and safest way to hang your guitar. The instrument sets on
Durable Black Foam Rubber Grips that fully cover steel hanger brackets to protect the instrument from
scratches. The hanger creates the least amount of stress on the guitar neck than any other guitar wall
hanger because the weight is off of the guitar headstock and is placed on the guitar body and mid neck,
the same as when you are holding and playing the instrument. You can safely hang and display your
guitar without any long term damage and warping to the guitar neck and headstock.
You can remove and hang your instrument very easily within seconds with this hanger just as
simple as picking it up and setting it down, unlike other angled wall hangers where you have to remove
your guitar strap to hang your guitar. With the Hang’em High guitar hanger you can leave the guitar
strap on your instrument, ready to pick up and play.
You can organize your room and display that Guitar the right way! The Hang’em High guitar
hanger is a perfect gift for the musician in your life to get their room organized and finally get those
instruments off the floor and couch. Impress the guests with this hanger displaying your guitar in your
studio and home. Create that "Rock Star Lives here" look to your home like a "Hard Rock Cafe".
Museums, studios, restaurants, music stores, homes and offices around the country use these hangers.
GVPro Production
Page 1
The hangers are constructed with Strong Red Oak wood bases with counter sunk holes for the
mounting screws and come in three finishes, Black, Classic Oak and Natural Oak. The steel hanger
brackets are fully covered with Durable Black Foam Rubber Grips. The hangers come with mounting
hardware that gives the instrument the security it needs with 2 anchor points for each base rated at 50
lbs each to ensure the hanger and instrument will stay up on the wall. This is especially important
considering you're hanging something very valuable on it. Each Hanger is backed by a 30-Day
Satisfaction guarantee and a lifetime warranty.
Hangers are available Sept. 1st 2008 at www.hangemhigh.net
Model 3 for Electric guitars
For instruments with body thickness up to 3 inches.
Strong Red oak wood base with counter sunk holes for the mounting screws.
Dimensions- body base 1 X 2 X 8.25in, neck base 1 X 2 X 3.75in.
Durable Black Foam Rubber Grips on steel brackets to protect the instrument from scratches.
Mounting Hardware included - four 2 inch screws, four drywall anchors rated at 50lbs each.
The hanger can be installed to hang the guitar from 15 to 70 degree angles.
Shipping weight 1 lb.
Made in the USA.
Three finish options- Black, Classic Oak and Natural Oak
Model 6 for Acoustic guitars
For instruments with body thickness up to 6 inches.
Strong Red oak wood base with counter sunk holes for the mounting screws.
Dimensions- body base 1 X 2 X 8.25in, neck base 1 X 2 X 3.75in.
Durable Black Foam Rubber Grips on steel brackets to protect the instrument from scratches.
Mounting Hardware included - four 2 inch screws, four drywall anchors rated at 50lbs each.
The hanger can be installed to hang the guitar from 15 to 70 degree angles.
Shipping weight 1 lb.
Made in the USA.
Three finish options- Black, Classic Oak and Natural Oak
GVPro Production
Page 2