FLOWER-BOX Data Sheet
Product: EMA
Rectangular flower-box Ema is made by aesthetic load-bearing corners and lateral sheets.
Load-bearing corners in steel sheet of 2,5mm with reinforced edge without cutting parts.
Corners are reinforced by inner folds to reinforce structure and allow the fixing of lateral panels. The corners are
connected to adjustable feet by means of special 5mm steel brackets.
Lateral steel sheets with folds along the edge to reinforce the structure. The bottom of flower-box is made by
5mm steel sheet with reinforcing edge and grant anchoring with corners and lateral sheets. All fixings are in
stainless steel. The flower-box can be provided of inner basin with function of water reservoir (optional) with
capability of 100 liters. The inner basin is made by stainless steel sheet of 2mm with holes for connection with
the upper soil.
Dimensions:
Length:
Depth:
Height:
Heavy:
1500 mm
400 mm
550 mm
88 kg (flower-box) 15 kg (basin for collection of water)
Versions:
In stainless steel AISI 304 electro polished
In stainless steel AISI 430 powder painted polyester
Fixing system:
N°4 Adjustable feet with n°1 hole Ø12,5mm each feet
Recommended fixing by means of n°4 dowels M10.
The kind of ground fixing must be checked according to the existing floor.
The responsibility of the type of ground fixing is of the installation company.
Ferrinox S.r.l. unipersonale
Via Fornace, 3 fraz. Arsego – 35010 SAN GIORGIO DELLE PERTICHE (PD) Italy - ℡ +39 049 9330195 Capitale sociale euro 95.000,00 i.v. – www.ferrinox.it – [email protected]
+39 049 9334077 – Partita IVA – ISO/codice fiscale/Iscr. Reg. Imprese IT 01341740288 – R.E.A. 205422
Fixing instructions
FLOWER-BOX mod. EMA
N°4 adjustable plates on the corners
Fixing through M10 anchor bolts for installation
with concrete plinth
Fixing with bolts M10 on existing floor / hardsurface
On existing not hard-surface we recommend to create a concrete plinth and fix the flower-box
with anchor bolts (see picture no.2)
On existing hard-surface we recommend to fix the flower-box with M10 bolts (see picture no.3)
Ferrinox S.r.l - via Fornace, 3 - 35010 Arsego di S. Giorgio delle Pertiche (PD) - Italy
www.ferrinox.it - [email protected] - +39 049.9330195