Ref. No.: 150.527
MHL-715WISPOT 7X 15W QUAD
DMX 2.4GHZ
MANUAL
-1-
Thank you for purchasing our company products.
Please read these instructions carefully to enjoy optimum performance and a longer service life before
you start to use.
UNPACKING INSPECTIONS
Unpacking instructions


Please unpack the carton and check the goods carefully when you receive it , if discover
packing damage, shortage or quality problem, please notify the shipper and reject the goods.
Before using this product, please read the instructions carefully and keep it in a safe place for
future reference.
Checking the contents of the carton:
The product, Power cord, Instruction Manual, Mounting Bracket
-2-
Safety Instructions
















Safety and regulatory power socket with high quality output should be used .
Always connect the product to a grounded circuit to avoid the risk of electrocution.
Never put tiny metal objects such as a screwdriver, iron wire and coins, etc. into the internal or
stretch into the machine in case of short circuit .
Please make sure to connect the proper voltage and do not higher or lower than that stated on
the decal or rear panel of the product .
Avoid hitting, crashing or squeezing with other objects in transportation. Never carry the
product from the power cord or any moving part . Always use the hanging / mounting bracket
or the handles.
The product is used in door only .
Never pull or tug on the cord and change it for another one , stop using it when it is damaged
or becomes hot .
Stop using the product once there is sparks when connecting with the power plug .
Can not operate product with wet hands and never place it near the water or other liquid.
Make sure there are no flammable materials close to the fixture while operating . Always install
it in a location with adequate ventilation.
Never replace the lighting source with different specification and rating when the original one
is damaged.
Make sure to power off before replacing the light source or the fuse. Never do it while it is on.
The ambient temperature is no more than 40°C(104°F) .
Never clean the fixture by water, thinner or other dissolved agent .
Stop using the product in case of a serious operating problem and send it to our maintenance
agent immediately. Never repair by non-professional workers .
Avoid direct eye exposure to the light source while the product is on.
PRODUCT OVERVIEW
FUNCTIONS INTRODUCTIONS
Main Functions






9 or 12 DMX channels .
Sound active, (wireless) DMX, master/slave mode .
7x 15W high quality QUAD LEDs.
With static colors, strobe, dimmer, color mixing and changing effects.
Pan/Tilt inversion
Electronic dimming 0 – 100%
-3-
System menu
-4-
DMX Address – Set the DMX address
Press the UP or DOWN button until “DMX address” is displayed, press ENTER.
“X” will now be displayed, (“X” represents the displayed address). Press the UP or DOWN button to
find the desired address. Press ENTER to confirm
System Reset – Use this function to reset the fixture.
Press the UP and DOWN button until “System Reset” is displayed, press ENTER.
The fixture will reset.
Firmware Version – This will display the software version
Press the UP or DOWN button until “Firmware Version” is displayed, press ENTER.
The software version will be displayed.
Fixture Time – With this function you can display the running time of the fixture.
Press the UP or DOWN button until “Fixture Time” is displayed, press ENTER.
The running time of the fixture will be displayed.
White Balance – This menu will let you select your desired strobe mode
Press the MENU button and UP button or DOWN button until “White Balance”is displayed, press
ENTER.
Press ENTER to display the “red” “green” “blue” and then press ENTER, the “RXXX” “GXXX” “BXXX”
XXX is the value of red, green and blue, then press the UP or DOWN to adjust the value.
Auto Test – With this function you can manually test the individual features.
Press the UP and DOWN button until “AutoTest” is displayed, press ENTER.
Use the UP and DOWN button to find the function or colors that you wish to test.
Once you find a function or color you wish to test, Press the ENTER button. Now you can adjust the
values by pressing UP and DOWN buttons. Once you have finished testing, press the ENTER button.
Tilt Invert – Tilt Inversion
Press the UP and DOWN button until “Tilt Invert” is displayed, press ENTER.
To activate the Tilt inversion press the UP or DOWN buttons until “yes” is displayed, press ENTER to
confirm. To deactivate Tilt inversion, select “No” and Press ENTER.
PAN Invert – Tilt Inversion
Press the UP and DOWN button until “Pan Invert” is displayed, press ENTER.
To activate the Tilt inversion press the UP or DOWN buttons until “yes” is displayed, press ENTER to
confirm. To deactivate Tilt inversion, select “No” and Press ENTER.
Pan Angle – Pan Angle
Press the UP or DOWN button until “Pan Angle” is displayed, press ENTER.
Press the UP or DOWN buttons to set your rotation.
-5-
Back LCD – Back LCD
Press the UP or DOWN button until “Black LCD” is displayed, press ENTER.
Press the ON or OFF buttons to set your desired LCD mode.
Show Mode – In this mode you can select your desired master mode
Press the UP or DOWN button until “Show Mode” is displayed, press ENTER.
Press the UP or DOWN buttons to select your desired master mode.
Slave Mode – In this mode the fixture will be a slave
Press the UP or DOWN button until “Slave Mode” is displayed, press ENTER.
Press the UP or DOWN buttons to select Master or Slave mode.
Channel mode – Select the desired channel mode
Press the UP or DOWN button until “Channel mode” is displayed, press ENTER.
“X Ch” will now be displayed, “X” represents the displayed channel mode. Press the UP or DOWN
buttons to find the desired channel mode. Press ENTER to confirm.
Wireless DMX
Switch the wireless system on with the on/off switch on the back panel.
Press the wireless button on the front panel to connect the system with your wireless transmitter. After
the connection is linked the LED will flash faster.
To reset the wireless connection, press and hold the button until the LED stops flashing.
-6-
Operation Instructions
DMX connection.
Master / Slave
connection.
-7-
DMX Channel settings
12 Channel settings:
DMX 12 Channel
1
2
Dimmer
Macro Color
DMX
Description
001 - 255
000 – 009
010 – 014
015 – 019
020 – 024
025 – 029
030 – 034
035 - 038
039 – 043
044 – 048
049 – 053
054 – 058
059 – 063
064 – 067
068 – 072
073 – 077
078 – 082
083 – 087
088 – 091
092 – 096
097 – 101
102 – 106
107 - 111
112 – 116
117 – 120
121 – 125
126 – 130
131 – 135
136 – 140
141 – 145
146 – 149
150 – 154
155 – 159
160 – 164
165 – 169
170 – 173
174 – 178
179 – 183
184 – 188
189 – 193
194 – 198
199 – 202
203 – 207
208 – 212
Dimmer 0 – 100%
Unused
Red
Green
Blue
Macro Color 1
Macro Color 2
Macro Color 3
Macro Color 4
Macro Color 5
Macro Color 6
Macro Color 7
Macro Color 8
Macro Color 9
Macro Color 10
Macro Color 11
Macro Color 12
Macro Color 13
Macro Color 14
Macro Color 15
Macro Color 16
Macro Color 17
Macro Color 18
Macro Color 19
Macro Color 20
Macro Color 21
Macro Color 22
Macro Color 23
Macro Color 24
Macro Color 25
Macro Color 26
Macro Color 27
Macro Color 28
Macro Color 29
Macro Color 30
Macro Color 31
Macro Color 32
Macro Color 33
Macro Color 34
Macro Color 35
Macro Color 36
Macro Color 37
Macro Color 38
Macro Color 39
-8-
3
4
5
6
Red
Green
Blue
White
7
Strobe
8
9
10
11
12
Pan
Pan Fine
Tilt
Tilt Fine
Function
Over 5 seconds on each value
213 – 217
218 – 222
223 – 227
228 – 231
232 – 236
237 – 241
242 – 246
247 – 251
252 - 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 009
010 – 255
000 – 255
000 – 255
000 – 255
000 – 255
000 – 127
128 – 255
Macro Color 40
Macro Color 41
Macro Color 42
Macro Color 43
Macro Color 44
Macro Color 45
Macro Color 46
Macro Color 47
Macro Color 48
Red Dimmer
Green Dimmer
Blue Dimmer
White Dimmer
No strobe
Strobe from slow to fast ( 1Hz-25Hz)
Pan Moving 0-630°
Speed fine moving
Tilt Moving 0-270°
Speed fine moving
Unused
Auto sound function
DMX
Description
000 – 255
000 – 255
000 – 255
000 – 255
000 – 200
201 – 247
248 – 255
000 – 255
000 – 255
000 – 255
000 – 255
Pan Moving 0-630°
Tilt Moving 0-270°
Pan fine moving
Tilt fine moving
Dimmer 0-100%
Strobe slow-fast
Full on
Red Dimmer
Green Dimmer
Blue Dimmer
White Dimmer
9 Channel settings:
DMX 9 Channel
1
2
3
4
Pan
Tilt
Pan Fine
Tilt Fine
5
Dimmer/Strobe
6
7
8
9
Red
Green
Blue
White
-9-
MAINTENANCE
The unit should be cleaned periodically to ensure the optimum performance, the smudginess can
decrease the life of light and the output of light is affected by the dust which can make the machine
overheating. In general, make the maintenance at least two times a month. Be sure to power off the
unit before cleaning .
Do not clean until the unit recovers normal temperature since high temperature for using, use the lens
tissue or soft cotton cloth with alcohol to wipe gently.
Cleaning frequency depends on the environment in which the fixture operates, damp, smoky or dirty
surrounding can cause greater accumulation of dirt on the optics. Never rub or press strongly on the
panel.
Specification
Pan movement: 630°
Tilt movement: 270°
Beam angle:
10°
Light intensity: 20000 lux @ 2m
No. of LEDs:
7x 15W Quad LEDs
DMX channels: 9 or 12
Connector:
3-pin XLR
Power Supply: 100-240Vac / 50Hz
Dimensions:
273 x 167 x 331mm
Weight:
4.5kg
CE (!) : Explanation - This Class-I 2.4GHz equipment can be placed on the market without restrictions.
Please consult the authorities of your own country for detailed information regarding the licensing
regime! In the following countries the regulative frequencies are :
NL:
B:
I:
RUS:
POR:
2245-2495.0 MHz,
2400-2483.5 MHz,
2215-2500.0 MHz,
2200-2500.0 MHz,
2483.5 MHz
D:
F:
E:
CZ:
2384.0-2483.5 MHz,
2465.0-2475.0 MHz,
2304.5-2480.5 MHz,
2200.0-2500.0 MHz,
- 10 -
CE & R&TTE Declaration of Conformity
Importer:
TRONIOS BV
Bedrijvenpark Twente 415
7602 KM - ALMELO
Tel :
0031546589299
Fax :
0031546589298
The Netherlands
Product number:
150.527
Product Description:
MHL-715WiSpot 7x 15W QUAD DMX 2.4Ghz
Regulatory Requirement:
EN 60598-1/-2-17
EN 55015
EN 61547
EN 61000-3-2/-3-3
EN 300 440-1/-2
The product meets the requirements stated in Directives 2006/95 and 2004/108/EC
and 1999/5/EC and conforms to the above mentioned Declarations.
Almelo,
13-12-2012
Signed:
P. Feldman
- 11 -
- 12 -
Specifications and design are subject to change without prior notice..
www.tronios.com
Copyright © 2013 by TRONIOS the Netherlands
- 13 -