TRANSLUCENT
TILES
%
00
RECYCLA
BL
G
Y
ENER
L
E
00
1
SA
VIN G
1
NOSITY
MI
E
MORE LU
MORE ILLUMINATION
AND ENERGY SAVINGS.
% R E C Y C LAB
Make it Easier with Brasilit
TRANSLUCENT TILES
More illumination, which results
in energy savings
The Brasilit translucent tiles provide beauty, comfort
and savings, enabling the entrance of up to 70% of the
light falling upon the roof, and distributing the natural
luminosity throughout the entire environment.
Made of PP (polypropylene), they are durable, resistant
to the sunbeams and practical for installation, perfectly
fitting to the traditional Brasilit fiber cement tiles.
ADVANTAGES AND BENEFITS
EXCELLENT
ILLUMINATION:
MATERIAL
RECYCLABLE
70% LIGHT TRANSMISSION
+DURABILITY
PROTECTION AGAINST UV
RAYS
LIGHTNESS
BETTER
FACILITATES
FLEXIBILITY
DOES NOT TURN YELLOWISH
THE LIGHT DIFFUSION
COST-BENEFIT RATIO
SAVINGS
OF ENERGY
TECHNICAL DATA
Ondulada tile – Wave Length 177/51
e = 1,1 mm
177
153
51
Total width 1100 mm
Available Dimensions
1,22 m
1,6 kg
1,53 m
2,0 kg
Also available in width of 920 mm
1,22 m
1,53 m
1,83 m
1,3 kg
1,7 kg
2,0 kg
1,83 m
2,4 kg
2,13 m
2,8 kg
2,13 m
2,3 kg
2,44 m
3,2 kg
2,44 m
2,7 kg
3,05 m
3,3 kg
Fibrotex tile - Wave Length 075/21
75
75
21
e = 1,0 mm
Total width 500 mm
Available Dimensions
1,22 m
0,6 kg
2,13 m
1,1 kg
2,44 m
1,3 kg
3,05 m
4,0 kg
3,66 m
4,0 kg
3,66 m
4,8 kg
INSTALLATION
Before installation, the translucent polypropylene tiles
shall be perforated using a drilling machine. The flat
part shall be placed upwards and the fixing shall be
done by means of nails or screws, according to the
structure (wood or metal), with the help of plastic
shims. The correct installation avoids leakage, cracks
and displacement of the tiles. The maximum distance
between supports is 1 m and the fixation shall be
done at least at 50 mm from the edge of the tile.
Purlin/structure
Wave 75
Wood
Galvanized nail 18 mm x 27 mm
Metal
Self-drilling screw 1/4” x 38 mm
Purlin/structure
Wave 177
Wood
Wood-thread nail 5/16” x 110 mm
Metal
Self-drilling screw 5/16” x 76 mm
Fixing nail or screw
with rubber washer and
metal washer
Translucent Tile Brasilit
Re-mount 1 wave and 1/4
Plastic support (shim)
Estimated consumption: 5 sets per m² of Translucid tiles.
In the lateral coating, consider a tab fixator at each 50cm.
Important: All fixations be provided with a sealing set (metal washer +
sealing rubber), and shims shall be installed to assure stability. The
tiles shall be stored in covered places (without exposure to the
sunlight).
Attention: For your safety, never walk directly on the tiles.
August/2016 / All information and images in this material are property of
Brasilit. Brasilit may change the information in this leaflet at any time,
when deemed necessary. For complete instructions about the
installation of the Brasilit products, check the site www.brasilit.com.br.
Sales Network: 55 11 2246 7166 / www.brasilit.com.br
E-mail: [email protected]
/Brasilit Saint-Gobain
/ BrasilitOficial