Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
ORGANIC CHEMISTRY SECTION
SAMPLE NAME
TEST NAME
FUELS AND PETROLUEM PRODUCTS
API Gravity/Specific Gravity/ Density
Liquid Fuels/ Lubricants
Ash, straight
Ash, Sulfated
Color
Copper Corrosion test
Flashpoint
Cleveland Open Cup (COC)
Penky Martens Closed Cup (PMCC)
Tag Closed Tester (TCT)
Kinematic viscosity
Total Acid Number
Viscosity index
Water & sediments
Water content
Compatibility Test
Sulfur
TEST METHOD
ASTM D4052/ASTM D1298
ASTM D 482
ASTM D 874
ASTM D1500
ASTM D130
TEST FEE
(PhP)
SAMPLE
REQUIREMENT
700.00
670.00
840.00
360.00
700.00
500mL
100mL
100mL
100mL
100mL
700.00
700.00
700.00
800.00
520.00
1,320.00
840.00
840.00
1,300.00
500mL
500mL
500mL
200mL
200mL
200mL
1L
1L
500mL
100mL
ASTM D 92
ASTM D 93
ASTM D 56
ASTM D 445
ASTM D 974
ASTM D 2270
ASTM D 1796/ASTM D2709
ASTM D 95
ASTM D 4740
Combustion
2000.00 1st spl,
Combustion
3100.00 1st spl,
900.00 next
CHN
100mL
1,500.00 next
Heating value
Pour Point
Solid Fuels (charcoal,wood Proximate Analysis
biomass)
Ash
Moisture
Volatile Combustible Matter
Fixed Carbon (by difference)
Heating value
Sulfur
ASTM D240
ASTM D97
ASTM D 1762
1,500.00
100mL
1,500.00
200mL
1,990.00 100g finely ground
ASTM D 1762
ASTM D 1762
ASTM D 1762
ASTM D 1762
ASTM D 3286
ASTM D 4239
840.00
450.00
700.00
1,990.00
1,500.00
2000.00 1st spl
ASTM D 5373
3100.00 1st spl,
900.00 next
Ultimate analysis
1,500.00 next
Acid solubility
Hardness, Mohs' scale
Dropping Point
Grease
Penetration Worked
Dry ERBP
Brake Fluid
Loss on Evaporation
pH
Specific Gravity
Kinematic viscosity @ 100 °C
Drop Melting Point
Waxes
Penetration, Needle
Penetration, Needle
Asphalt
Softening point
PLANTS AND PHARMACUETICAL PRODUCTS
Proximate Composition of Acid insoluble ash
Plant & Plant Products and Crude Fat
Herbal Food Supplements Crude Fiber
Crude Protein
Essential Oil content
Fixed Oil content
Moisture
Total Ash
Anthracite Coals
CHL-OCS - Schedule of Test Fee
ANSI/AWWA B100-96
ASTM D 566
ASTM D 217
PNS 239
PNS 239
PNS 239
ASTM D 1298
ASTM D 445
ASTM D 127
ASTM D 1321
ASTM D 5
ASTM D 36
1,500.00
300.00
600.00
650.00
480.00
2,200.00
400.00
700.00
800.00
720.00
720.00
720.00
720.00
1000 g granules
100 g blocks
100 g
500g
1L
USP 23, [561]
AOAC 920.39
USP 23, [561]
AOAC 955.04
USP 23, [561]
USP 23, [401]
USP 23, [921]
USP 23, [561]
1,080.00
960.00
1,380.00
1,120.00
1,080.00
840.00
600.00
720.00
20 g
20g
20 g
20 g
500g per set up
500g
20 g
20 g
Page 1 of 17
100g
200 g
200 g
50 g
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
ORGANIC CHEMISTRY SECTION
SAMPLE NAME
Plant Components
TEST NAME
Phytochemical (alkloids, flavonoids,
glycosides saponins, sterols,
tannins,triterpenes
Alkaloids
Flavonoids
Glycosides
Hydrogen Cyanide
Sterols
Sugar (Glucose, Fructose, Sucrose)
TEST METHOD
BTD Manual Qualitative
TLC
TLC
TLC
BTD Manual Qualitative
TLC
HPLC
TEST FEE
SAMPLE
(PhP)
REQUIREMENT
650.00
300 g
1,200.00
1,200.00
1,200.00
600.00
1,200.00
2500.00 any 1st
analyte
add'l analyte
300 g
300 g
300 g
300 g
300 g
100 – 150g dried or
fresh spl
600.00 each
Triterpenes
Plant Oils (Essential & Fixed Iodine value
Oil) Plant Extracts
Refractive Index
Saponification Value
Acid Value
Specific Gravity
Total Essential oil Content
Total Fixed Oil Content
Viscosity (Brookfield)
Scavenging activity of plant extracts
Antioxidant activity of plant extracts
Carvacrol
Citral
Citronellal
Citronellol
Eucalyptol/Cineole
Eugenol
Geraniol
Limonene
Linalool
Myrcene
ą-Pinene
ß-Pinene
Terpineol
Caffeine
Alkaloids
Catechol
Tannins
Pyrogallol
Calcium
Liquid Nutritional
Supplement
Phosphorous
Sodium
ß-Carotene
Plant Products & Herbal
Supplements
Vitamin A
Vitamin B1
Vitamin B2
Vitamin B6
Vitamin E
Camphor
Topical Preparations,
Liniments, Ointments
Menthol
Eucalyptol/Cineole
TLC
1,200.00
USP [401]
USP [831]
USP [401]
Titration
USP [841]
AOAC 932.11
USP [401}
ASTM D 2556
Spectrophotometer
Spectrophotometer
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
HPLC
TLC
TLC
AOAC 929.07
AOAC 930.35
AOAC 966.16
HPLC
HPLC
HPLC
HPLC
HPLC
HPLC
GC
GC
GC
600.00
400.00
800.00
600.00
500.00
1,080.00
840.00
840.00
3,960.00
1,160.00
Methyl Salicylate
Medicated Cosmetic Soaps Camphor
Menthol
CHL-OCS - Schedule of Test Fee
GC
GC
GC
Page 2 of 17
1,800.00 any 1st
analyte add'l.
Analyte 600.00
each
2,800.00
1,200.00
1,200.00
1,920.00
1,440.00
1,920.00
4,000.00
3,750.00
3,500.00
3,500.00
3,500.00
3,600.00
1,800.00 any 1st
analyte 600.00 per
add'l analyte
1,800.00
1,800.00
5-10g extract
50g dried part
10g
5 mL
20 g
100 mL
100 mL
300 mL
250 g
500 mL
200 g
200 g
5mL
5mL
5mL
5mL
5mL
5mL
5mL
5mL
5mL
5mL
5mL
5mL
5mL
100 g
100 g
100 g
1L
500 mL
1L
100 g
100 g
100 g
100 g
100 g
100 g
60 – 100mL
60 – 100mL
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
ORGANIC CHEMISTRY SECTION
SAMPLE NAME
TEST NAME
TEST METHOD
HPLC
Medicated Cosmetic Liquid
Preparations
Retinoic Acid (Tretinoin)
Fineness of Grind
Gloss Measurement
Pigment and Vehicle content
Titanium Dioxide
Organic solvent-based
Paints, Enamel, White;
Polyurethane
Primer Paints: Zn Yellow,
Red Lead, Ferrous Oxide
CHL-OCS - Schedule of Test Fee
If requested alone
Total Solids, % weight
Viscosity (KU) (Stormer)
Volume non-volatile matter
If requested alone
Water resistance
Adhesion
Density
Dry/Cure time
Fineness of Grind
Flexibility
Gloss Measurement
Hardness
Pigment and Vehicle content
Titanium Dioxide
If requested alone
Total Solids, % weight
Viscosity (KU)
Volume non-volatile matter
or Total Solids, % volume
If requested alone
Adhesion
Density
Dry/Cure time
Fineness of Grind
Flexibility
Gloss Measurement
Hardness
Iron Oxide (Iron Oxide Primer)
If requested alone
Pigment and Vehicle content
Red Lead (Red Lead Primer)
If requested alone
Total Solids, % weight
Viscosity (KU)
Volume non-volatile matter
or Total Solids, % volume
If requested alone
Chromium (Zn Yellow Primer)
If requested alone
Zinc (Zn Yellow Primer)
If requested alone
SAMPLE
REQUIREMENT
4 bots in orig. pack
3,750.00
Ethanol / 2-Propanol
Drug, Pharmaceuticals and pH
Cosmetic Preparations
Viscosity (Brookfield)
Moisture
PAINTS AND ALLIED PRODUCTS
Water-based Paints, Latex, Chemical resistance
White; Elastomeric; Acrylic
Spot Test
Polymer, Copolymer
Immersion Test
Density
Dry/Cure time
TEST FEE
(PhP)
GC
USP 23
ASTM D 2556
USP 23
1,800.00 any 1st
analyte 600.00 per
add'l analyte
325.00
840.00
600.00
ASTM D 1308
ASTM D 1475
ASTM D 1640
400.00
650.00
515.00
400.00
ASTM D 1210
ASTM D 523
ASTM D 2371
ASTM D 1394
380.00
500.00
1,000.00
1,300.00
ASTM D 2369
ASTM D562
ASTM D2697
ASTM D870
ASTM D 3359
ASTM D 1475
ASTM D 1640
ASTM D 1210
ASTM D 522
ASTM D 523
ASTM D 3363
ASTM D 2371
ASTM D 1394
ASTM D 2369
ASTM D 562
ASTM D 2697
250 mL
100 mL
500 mL
100 g
At least 4L sample
Test panels
1,920.00
500.00
500.00
500.00
1,200.00
390.00
375.00 At least 4L sample
515.00
Test panels
400.00
380.00
400.00
500.00
375.00
1,000.00
1,300.00
1,920.00
500.00
500.00
ASTM D 3359
ASTM D 1475
ASTM D 1640
ASTM D 1210
ASTM D 522
ASTM D 523
ASTM D 3363
500.00
1,200.00
375.00 At least 4L sample
515.00
Test panels
400.00
380.00
400.00
500.00
375.00
AAS
ASTM D 2371
1,920.00
1,000.00
AAS
ASTM D 2369
ASTM D 562
ASTM D 2697
1,920.00
500.00
500.00
ASTM D 444
500.00
1,515.00
1,200.00
1,920.00
AAS
1,920.00
Page 3 of 17
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
ORGANIC CHEMISTRY SECTION
SAMPLE NAME
Reflectorized Traffic
Marking Paints: White and
Yellow
Thermoplastic Powder
Paints White and Yellow
Aluminum Paints
Avion Blue Enamel Paint
CHL-OCS - Schedule of Test Fee
TEST NAME
TEST METHOD
Density
Dry/Cure time/No-Pick-Up time
Glassbeads
Content
Density
Gradation
Lead, Total (for yellow paint)
If requested alone
Pigment & Vehicle Content
Titanium Dioxide (for white paint
ASTM D 1475
ASTM D 1640/D711
Total Solids, % weight
Water resistance
Calcium Carbonate
If requested alone
Dry/Cure time
Glassbeads
Content
Density
Gradation
Lead, Total (for yellow paint)
If requested alone
Pigment
Softening Point
Titanium Dioxide (for white paint)
If requested alone
Chrome Yellow (for yellow paint)
If requested alone
Density
Dry/Cure time
Pigment and Vehicle content
Viscosity (Ford Cup #4 )
Volatile and nonvolatile Matter
Water content
Adhesion
Chemical resistance
Spot Test
Immersion Test
Additional substrate
Heat resistance
Total Solids, % weight
Total Solids, % volume
If requested alone
Adhesion
Chemical resistance
Spot Test
Immersion Test
Additional substrate
Density
Dry/Cure time
Fineness of Grind
Flexibility
Hardness
Total Solids, % weight
Viscosity (Ford Cup #4)
Water resistance
ASTM D2369
ASTM D870
ASTM C25
JIS K5665
JIS R3301
ASTM D1214
AAS
ASTM D237/D4451
ASTM D1394
700.00
700.00
1,250.00
1,920.00
1,000.00
1,300.00
ASTM D1640
500.00
390.00
1,100.00 At least 1kg sample
1,560.00
400.00
JIS K5665
JIS R3301
ASTM D1214
700.00
515.00
1,250.00
AAS
ASTM D4451
ASTM E28
ASTM D1394
1,920.00
1,000.00
870.00
1,300.00
ASTM D1394
1,300.00
ASTM D1475
ASTM D1640
ASTM D2371
ASTM D1200
ASTM D2369
ASTM D95
ASTM D3359
ASTM D1308
450.00 At least 4L sample
400.00
Test panels
1,000.00
500.00
600.00
950.00
375.00
ASTM D2485
ASTM D2369
ASTM D2697
ASTM D3359
ASTM D1308
ASTM D1475
ASTM D1640
ASTM D1210
ASTM D522
ASTM D3363
ASTM D2369
ASTM D1200
ASTM D870
Page 4 of 17
TEST FEE
SAMPLE
(PhP)
REQUIREMENT
515.00 At least 4L sample
400.00
Test panels
400.00
650.00
120.00
3,000.00
500.00
500.00
1,200.00
375.00 At least 4L sample
Test panels
400.00
600.00
120.00
450.00
400.00
380.00
400.00
375.00
500.00
500.00
390.00
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
ORGANIC CHEMISTRY SECTION
SAMPLE NAME
Epoxy Paints
Adhesives
Glue
Physical analysis of
Fingerprint Taker
Indelible Ink
FOOD AND FEEDS
Foods/Feeds
CHL-OCS - Schedule of Test Fee
TEST NAME
TEST METHOD
Adhesion
Chemical resistance
Spot Test
Immersion Test
Additional substrate
Density
Dry/Cure time
Flexibility
Hardness
Total Solids, % weight
Total Solids, % volume
If requested alone
Viscosity (KU)
Water resistance
Viscosity, Krebs Unit
Total Solids (non volatile content)
Viscosity (Brookfield)
pH
Free formaldehyde
Solid Content
Thumbprint Impressions, plain
ASTM D3359
ASTM D1308
ASTM D1475
ASTM D1640
ASTM D522
ASTM D3363
ASTM D2369
ASTM D2697
ASTM D562
ASTM D870
ASTM D1084
ASTM D4426
ASTM D1084
PNS 1800:2000
Sirchie Fingerprint
Method
ISTD (Gravimetry/
Titrimetry)
Silver Nitrate, % w/w
Protein
Ash
Ash-Acid insoluble
Ash-Water soluble & insoluble
Ash-Alkalinity
Ash-Alkalinity of Water, Insoluble
Ash-Alkalinity of Water Soluble
Ash-Sulphated
Crude Fiber
Moisture
Crude Fat
Starch
Food Energy ( Calories)
Total carbohydrate
Total Dietary Fiber
pH
Cholesterol
Caffeine
Sorbic Acid
Benzoic Acid
Nitrite in meat
Calcium
Iron
Magnesium
Manganese
Potassium
Sodium
Zinc
Lead
Cadmium
Mercury
Copper
Phosphorous
Arsenic
Acidity (Titratable) in fruit/ veg. product
Acidity (Volatile) in fruit/ veg. product
Solids (Soluble) in fruit/ veg. Product
Solids (Water-insoluble) in fruit/ veg. Product
Sodium Chloride
Solids (Total)
Block Digestion Method
AOAC
Gravimetric
Gravimetric
Gravimetric
Gravimetric
Gravimetric
Gravimetric
Gravimetric
Gravimetric
Acid hydrolysis
Direct acid hydrolysis
By computation
By difference
AOAC
AOAC
HPLC
HPLC
HPLC
HPLC
AOAC
AOAC
AOAC
AOAC
AOAC
AOAC
AOAC
AOAC
AOAC
AOAC
Cold Vapor AAS
AOAC
AOAC
AOAC
AOAC
AOAC
Page 5 of 17
AOAC
AOAC
AOAC
AOAC
TEST FEE
SAMPLE
(PhP)
REQUIREMENT
375.00 At least 4L sample
Test panels
400.00
650.00
120.00
450.00
380.00
400.00
375.00
500.00
500.00
1,200.00
500.00
390.00
500.00 At least 1L/analyte
500.00
840.00
400.00 At least 1L/analyte
700.00
500.00
960.00 at least 10 pcs.
1,920.00 at least 150 mL
1,120.00
550.00
900.00
1,020.00
1,000.00
1,440.00
1,320.00
1,000.00
1,380.00
400.00
1,200.00
1,200.00
90.00
90.00
7,200.00
325.00
3,960.00
2,800.00
4,400.00
4,400.00
1,500.00
1,920.00
1,920.00
1,920.00
1,920.00
1,920.00
1,920.00
1,920.00
1,920.00
1,920.00
1,920.00
1,920.00
1,920.00
2,300.00
540.00
480.00
480.00
360.00
700.00
400.00
200 mL or 200 g
200 g
200 g
200 g
200 g
200 g
200 g
200 g
200 g
200 g
200 g
200 g
500 g
500 g
300 g
200 g
300 g
300 g
300 g
300 g
400 g
1L
500 mL
1L
1L
1L
1L
500 mL
500 mL
500 mL
500 mL
500 mL
500 mL
500 mL
300 mL
300 mL
200 mL
200 mL
200 g
200 g
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
ORGANIC CHEMISTRY SECTION
SAMPLE NAME
TEST NAME
TEST METHOD
Total Reducing Sugar
Free Reducing Sugar
Density
Specific Gravity
Total Solids (% in syrup)
Lactose Purity
Fructose Purity
Glucose Purity
Sucrose Purity
Sucrose
Aspartame (Beverage)
Lactose in milk
Glycerol
Acid (as Acetic Acid), Total
Vinegar
Alcohol
Alkalinity of soluble ash
Ash
Nonvolatile acids
Nonvolatile reducing substances
Permanganate Oxidation Number
Total Solids
Total soluble solids
Volatile Acids
If requested alone
Specific Gravity
Fats and Oils
Fatty Acid Profile
(For solid food, additional fee for extraction)
Free Fatty Acid/Acid No.
Index of Refraction
Iodine Absorption Number
Melting Point of Fat/Fatty Acid
Moisture/Volatile Matter
Peroxide Value
Saponification Value
Specific Gravity
Unsaponifiable Matter
Viscosity (Brookfield)
Viscosity (Cannon-Fenske)
Vitamin A (Retinol)
Vitamins in Food/Feeds
Total Vitamin A (Retinol + ß-carotene)
ß-carotene
Vitamin E
Niacinamide in juice
Vitamin B1
Vitamin B2
Vitamin B6
Vitamin C
Distilled Liquors/Wines/Beer Acids
Total Acids
Fixed Acids
Volatile acids (If requested alone)
Alcohol
Ash
Ethanol/Methanol
AOAC
AOAC
AOAC
AOAC
AOAC
HPLC
HPLC
HPLC
HPLC
AOAC
HPLC
HPLC
HPLC
AOAC 930.35
AOAC 930.35
AOAC 900.02
AOAC 930.35
AOAC 930.35
AOAC 930.35
AOAC 944.10
AOAC 930.35
AOAC 930.35
AOAC 930.35
Sugar and sugar products
AOAC 985.19
GC
AOAC 940.28
AOAC 921.08
AOAC 920.158/159
AOAC 920.157
AOAC 962.12
AOAC 965.33
AOAC 920.160
AOAC 920.212
AOAC 033.08
ASTM D 2564/1084
ASTM D445
HPLC
HPLC
HPLC
HPLC
HPLC
HPLC
HPLC
HPLC
HPLC
AOAC
GC
AOAC
GC
TEST FEE
(PhP)
1,100.00
840.00
480.00
500.00
480.00
2,500.00
2,500.00
2,500.00
2,500.00
1,125.00
2,400.00
2,400.00
2,400.00
560.00
600.00
800.00
550.00
650.00
1,200.00
1,200.00
400.00
480.00
480.00
1,140.00
500.00
2,400.00
1,080.00
500.00
400.00
600.00
500.00
450.00
600.00
800.00
500.00
1,320.00
840.00
600.00
3,750.00
7,000.00
4,000.00
4,200.00
3,500.00
3,500.00
3,500.00
3,500.00
3,000.00
SAMPLE
REQUIREMENT
200 g
200 g
200 g
200 g
100 g
100 g
100 g
100 g
100 g
200 g
200 g
200 g
200 g
200 mL/ analyte
200 mL/analyte
1L
200 mL/ analyte
300 g/analyte
1L
560.00
600.00
1,140.00
1,800.00
550.00
1,800.00 1st analyte
1L
500 mL
1L
+600.00 add'l
analyte
GC
AOAC
Fusel Oil
Higher Alcohol & Ethly Acetate
1,800.00
1,800.00 1st analyte
1L
1L
+600.00 add'l
analyte
Specific Gravity
Total Aldehydes
Total Acidity (for wines as Tartaric, Malic or
Citric)
CHL-OCS - Schedule of Test Fee
Page 6 of 17
AOAC
AOAC
AOAC
500.00
600.00
560.00
500 mL
1L
500 mL
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
ORGANIC CHEMISTRY SECTION
SAMPLE NAME
Ethyl Alcohol
Organic Solvent and
Chemicals
Disinfectant
Toilet Soap/Laundry Soap
Other Test
Toilet Soap/Laundry Soap
Other Test
CHL-OCS - Schedule of Test Fee
TEST NAME
Acetone
Benzene
Purity
Fusel Oil & Amyl Alcohol
Density
Acidity
Water Miscibility
pH
Purity
Residue on Evaporation
Refractive Index
Viscosity (Brookfield)
Flash Point, TCT
Benzalkonium Chloride content
Viscosity (Brookfield)
pH
Moisture & Volatile Matter
Total Matter Insoluble (alcohol+NaCl)
Free Alkali (as NaOH or Na2O)
Matter insoluble in Water
If requested alone
Anhydrous soap
FTRI Scan
Viscosity (Brookfield)
pH
Moisture & Volatile Matter
Total Matter Insoluble (alcohol+NaCl)
Free Alkali (as NaOH or Na2O)
Matter insoluble in Water
If requested alone
Anhydrous soap
FTRI Scan
TEST METHOD
GC
GC
GC
GC
ASTM
ASTM D1613
ASTM D1722
ASTM E 70
GC
ASTM D 1353
Refractometric Method
ASTM
ASTM
USP
ASTM
ASTM E 70
PNS
PNS
PNS
PNS
PNS
PNS
FTIR
ASTM
ASTM E 70
PNS
PNS
PNS
PNS
PNS
PNS
FTIR
Page 7 of 17
TEST FEE
SAMPLE
(PhP)
REQUIREMENT
1,800.00
200 mL
1,800.00
200 mL
1,800.00
200 mL
1,800.00
200 mL
480.00
200 mL
840.00
200 mL
480.00
200 mL
360.00
200 mL
1,800.00
200 mL
720.00
200 mL
400.00
200 mL
840.00
500 mL
700.00
300 mL
1,200.00
200 mL
840.00
1L
400.00
200 mL
720.00
200 g
1,320.00
200 g
720.00
200 g
720.00
200 g
1,080.00
200 g
1,440.00
200 g
620.00
840.00
1L
360.00
200 mL
720.00
200 g
1,320.00
200 g
720.00
200 g
360.00
200 g
1,080.00
200 g
1,440.00
200 g
590.00
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
INORGANIC CHEMISTRY SECTION
SAMPLE NAME
Water (Deepwell,
Spring, Distilled,
Deionized, Bottle) and
Wastewater (Effluent,
Influent)
TEST NAME
Acidity as CO2
Titrimetry
Alkalinity as CaCO3
Titrimetry
GF-AAS
HVG-AAS
IC
Aluminum
Arsenic
Anions
(F, Cl, NO2, Br, NO3,PO4, SO4)
Succeeding ions
Bicarbonates
Cadmium
Cadmium
Calcium
Calcium
Chloride
Chlorine (Residual)
Chromium
Chromium
Color
Conductivity
Copper
Copper
Extractable Chloride
Extractable Ions
Iron
Iron
Lead
Lead
Magnesium
Magnesium
Manganese
Manganese
Mercury
Mercury
Nickel
Nickel
Nitrogen (Ammonia-Nitrogen)
Nitrogen (Organic)
pH
Phosphorus
Potassium
Silica
Silicon
Silver
Sodium
Sulfate
Total Hardness
Total Dissolved Solids
Total Suspended Solids
Total Solids
Turbidity
Zinc
Zinc
CHL-ICS - Schedule of Test Fee
TEST METHOD
Titrimetry
AAS
GF-AAS
AAS
EDTA Titration
Argentometric titration
Iodometric
AAS
GF-AAS
Platinum Standard
Electrical Conductivity
Method
AAS
GF-AAS
Titrimetry(Argentometric)
IC
AAS
GF-AAS
AAS
GF-AAS
AAS
EDTA-By difference
AAS
GF-AAS
Cold Vapor AAS
CV-AFS
AAS
GFAAS
Distillation/Titration
Kjeldahl Titration
pH Potentionetry
Colorimetry
AAS/Flame Emission
Gravimetry
UV-Vis
AAS
AAS/Flame Emission
Turbidimetry/Gravimetry
EDTA Titration
Gravimetry
Gravimetry
Gravimetry
Turbidimetry
GF-AAS
AAS
Page 8 of 17
TEST FEE
(PhP)
500.00
500.00
1,500.00
1,500.00
1,100.00
(1st analyte)
800.00
500.00
1,200.00
1,500.00
1,200.00
700.00
750.00
750.00
1,200.00
1,500.00
700.00
350.00
1,200.00
1,500.00
1,000.00
1,100.00
1,200.00
1,500.00
1,200.00
1,500.00
1,200.00
700.00
1,200.00
1,500.00
1,500.00
1,550.00
1,200.00
1,500.00
850.00
950.00
350.00
700.00
1,200.00
800.00
800.00
800.00
1,200.00
850.00
700.00
600.00
650.00
700.00
300.00
1,500.00
1,200.00
SAMPLE
REQUIREMENT
Not less than 6L
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
INORGANIC CHEMISTRY SECTION
SAMPLE NAME
TEST NAME
TEST METHOD
TEST FEE
SAMPLE
(PhP)
REQUIREMENT
6,400.00 3 pcs sample if diameter
 5 cm length –
0.5m
6 pcs
sample if diameter
 5 cm length – 1m
(Max diam
accepted = 10 cm)
Sealed at one end
Pipes (uPVC, etc.)
Extractable Pb (First and Third
Extraction)
GF-AAS
Ceramics and Plastic
Containers for
Foodstuff
Extractable Metals
GF-AAS
2000 per
element
Toys and Other Related
Materials
Chemical/Reagents
KOH – Caustic potash
NaOH – Caustic Soda
NaHCO3 – Baking Soda
NaHCO3 – tartaric acid
+ baking powder
Na2CO3 – Soda ash
Extractable Metals
GF-AAS
1800 per
at least 100mL
element
800.00 For powder sample –
1,500.00 100g
650.00 For liquid sample –
100mL
700.00
800.00
600.00
400.00
300.00
500.00
850.00
1,200.00
Bleaching Powder/
Solution, Detergents,
Sodium/Calcium
Hyprochloride
Available Chlorine
Alkalinity
Plating Solution
Metals (Ag, Au, Cd, Cr, Cu, Fe, Mg,
Mn, Ni, Pb, Zn, etc)
Bulk/Packed Density
pH
Sieve Analysis (one mesh)
Sieve Analysis (succeeding mesh)
Complete Chemical Analysis (NaCl.
Moisture,, Water Insolubles, Ca, Mg,
SO4)
Acid Insolubles
Calcium
Iodine (as received)
Magnesium
Arsenic
Arsenic
Assay
Chloride
Heavy Metals as Pb
Insoluble Residue
pH (liquid)
Specific Gravity, Hydrometer
Specific Gravity, Pycnometer
Sulfate
Trace Metals
Mercuric Bromide Stain
HVG-AAS
Titrimetry
Titrimetry
Colorimetry
Gravimetric
ASTM E70
ASTM D891
ASTM D891
Turbidimetry
AAS (Std addition)
at least 100mL
per element
Powder Granules
Salt/Sodium Chloride
Moisture
Assay, NaCl (as received)
Sulfate
Water Insolubles
Soil, Sediments, Sludge Arsenic
Metals (Cd, Ca, Cr, Cu, Fe, Pb, Mg,
Mn, Ni, P, K, Na, Zn)
CHL-ICS - Schedule of Test Fee
ASTM D2022
ASTM D2022
AAS
ASTM C110
pH Potentiometry
ASTM C110
ASTM C110
AOAC 925.55
AOAC 925.55
ASTM E534
AOAC 925.56
ASTM E534
AOAC 925.55
Argentimetric Titration
AOAC 925.55
AOAC 925.55
HVG AAS
AAS
700.00 For powder sample –
650.00 100g
For liquid sample –
100mL
880.00
per metal
450.00
at least 500g
400.00
400.00
230.00
5,000.00 at least 250g
1 kg sample for
Complete Chemical
600.00 Analysis
700.00
700.00
700.00
650.00
700.00
800.00
600.00
1,500.00
1,000.00
per element
Page 9 of 17
at least 100mL
at least 250g
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
INORGANIC CHEMISTRY SECTION
SAMPLE NAME
Clay and Related
Materials, Pozzalan
Cement/Perlite/
Zeolite/Refractories/ Fly
Ash Sand/Silica Sand
(99.9 % SiO2)
Diatomaceous Earth
(77% SiO2) Rice Hull
(90% SiO2)
Ceramics/Glass
Borosilicate glass
TEST NAME
Complete Chemical Analysis
(SiO2, Fe2O3, Al2O3, TiO2, CaO,
MgO, Na2O, K2O, LOI)
Alumina
Calcium Oxide
Iron Oxide
Loss on Ignition
Magnesium Oxide
Moisture
Potassium Oxide
Silica
JISM 5584
TEST FEE
(PhP)
6,500.00
JISM 5584
JISM 5584
JISM 5584
JISM 5584
JISM 5584
JISM 5584
JISM 5584
JISM 5584
850.00
800.00
850.00
700.00
1,100.00
600.00
800.00
1,070.00
Sodium Oxide
JISM 5584
800.00
Titania
Manganese Oxide
Boron Oxide
Complete Chemical Analysis (SiO2,
Limestone (CaCO3),
Fe2O3, Al2O3, CaO, MgO, LOI
Quicklime (CaO),
Hydrated Lime
Alumina
(Ca(OH)2), Scales, etc. Available Lime Index
Calcite -CaCO3
Calcium Oxide
Lime – CaO (apog)
Iron Oxide
Loss on Ignition
Magnesium Oxide
Moisture
Potassium Oxide
Sodium Oxide
Silica
Phosphorous Pentoxide, (P2O3)
Gypsum (CaSO4.2H2O) Complete Chemical Analysis
and Gypsum Products, (CaSO4.2H2O, CaSO4, SIO2 and
Insoluble, R2O3, CaO, MgO, SO3)
Aluminum Oxide
Anhydrite (CaSO4)
Calcium Oxide
Combined Water
Free Water
Iron and Aluminum Oxides (mixed
oxides)
Iron Oxide
Magnesium Oxide
Purity as CaSO4.2H2O
Silica and Insoluble Matter
Sodium Chloride
Sulfate/Sulfur Trioxide
Moisture
Boiler Scale
Organic & Volatile Matter
Silica
Iron & Aluminum Oxide
Lime (CaO)
TEST METHOD
JISM 5584
AAS
Titrimetry ASTM 169-92
ASTM C25
800.00
900.00
1,500.00
4,500.00
at least 250g
ASTM C25
ASTM C25
ASTM C25
ASTM C25
ASTM C25
ASTM C25
ASTM C25
ASTM C25
ASTM C25
ASTM C25
ASTM C25
ASTM C471
1,310.00
500.00
650.00
800.00
600.00
1,100.00
600.00
800.00
800.00
1,320.00
1,310.00
6,500.00
at least 250g
ASTM C471
ASTM C471
ASTM C471
ASTM C471
ASTM C471
ASTM C471
805.00
800.00
800.00
750.00
500.00
700.00
ASTM C471
ASTM C471
ASTM C471
ASTM C471
ASTM C471
ASTM C471
Tech. Method of Analysis
by Griffin
Magnesia (MgO)
Sulfur Trioxide
Fertilizers and Related
Materials
Organic Fertilizer
CHL-ICS - Schedule of Test Fee
Chloride
Phosphate
Micronutrients (Ca, Cu, Fe, Mg, Mn,
Ni, Zn)
Moisture
Nitrogen
Phosphorus
Potassium
SAMPLE
REQUIREMENT
at least 250g
850.00
1,100.00
800.00
800.00
500.00
930.00
600.00
650.00
1,320.00
1,320.00
650.00
100-150 g
1,100.00
930.00
AAS
AOAC
Kjeldahl Titration
Colorimetry
AAS
Page 10 of 17
700.00
800.00
1,200.00 For solid sample–at least
per element 200g For liquid sample–
600.00 at least 200mL
1000.00
1,000.00
1,000.00
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
CHEMISTRY LABORATORY
INORGANIC CHEMISTRY SECTION
SAMPLE NAME
Cement (Hydraulic,
Portland)
Aggregates
CHL-ICS - Schedule of Test Fee
TEST NAME
Complete Chemical Analysis (SiO2,
Fe2O3, Al2O3, TiO2, CaO, MgO,
SO3, LOI, Insoluble Residue)
Alumina
Silica
Calcium Oxide
Insoluble Residue
Iron Oxide
Loss on Ignition
Magnesium Oxide
Potassium Oxide
Sodium Oxide
Sulfate/Sulfur Trioxide
Titania
TEST METHOD
ASTM C114
TEST FEE
(PhP)
5,800.00
ASTM C114
ASTM C114
ASTM C114
ASTM C114
ASTM C114
ASTM C114
ASTM C114
ASTM C114
ASTM C114
ASTM C114
ASTM C114
850.00
800.00
800.00
700.00
850.00
700.00
1,100.00
800.00
800.00
930.00
800.00
Page 11 of 17
SAMPLE
REQUIREMENT
at least 250g
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
4
Effectivity Date :
Oct 1, 2014
TEST FEE
(PhP)
SAMPLE REQUIREMENT
PHYSICAL AND PERFORMANCE TESTING LABORATORIES
SAMPLE NAME
Sacks
Duty Free Shopping bag
Perlite Insulation
TEST NAME
Breaking Strength
One Way
Other Way
Bursting Strength
Fabric Count
One Way
Other Way
Required Test
Tensile / Elongation
Tear Strength
Sealing Strength
Handle Performance
Thickness
Sample Conditioning
Density
Moisture content
PVC Pipes
TEST METHOD
ASTM D5034
ASTM D5034
ASTM D3786
600.00
600.00
450.00
ASTM D3775
ASTM D3775
ASTM D882
ASTM D882
ASTM D1004
ASTM D882
ASTM D882
200.00
200.00
ASTM D618
ASTM C303
ASTM C610 sec 11.1.7
20 Bags/Size
600.00
600.00
600.00
600.00
200.00
1,500.00
350.00 200mm x 100mm x 50mm,
5 pcs
350.00 150mm x 150mm x 50mm ,
5 pcs
1,000.00
Conditioning ( Oven & 24 Hr. @ 23 C ,
50% RH)
Flexural Strength
ASTM C203
600.00
Compressive Strength
Resistance to Acetone
ASTM C165
ISO 3472
600.00 4 in x 6 in x ½ in , 5 pcs
250.00 5 pcs ( 100mm x 25 mm )
ISO 3473
Longitudinal Heat Reversion Test
Vicat Softening Point
ISO 2505
ISO 2507
350.00
5 pcs ( L = 200 mm )
1,000.00 5 pcs ( L = 50 mm , W = 10
to 20mm , t= 2.4 to 6 mm)
( if t= 2.4 mm , use two
layers of at least t=2.4 total.
Thickness )
Water Absorption
ISO 2508
1,000.00 5 pcs ( area / pc 50 cm2 for
pipes w/ 32 mm OD or L = 5
cm and arc 5 cm for pipes
with OD > 32 mm )
Flattening Test
Resistance of External Blows ( Drop
Impact )
Hydrostatic Test
ASTM D2241
ISO 3127
Aging Test
ASTM D573
ISO 1167
22 h
48 h
70 h
72 h
96 h
100 h
168 h
336 h
PPTL - Schedule of Test Fee
12 in x 4 in x 1 in , 5 pcs
Resistance to H2SO4 for 14 days days
@ 55°C
9,400.00
700.00
Rubber Products
3 pieces of whole sack per
sample
1,000.00
1,500.00
5 pcs. ( L = 2 inches
pcs. ( L= 10 inches )
1,500.00 250mm + 3x O.D + 100 mm,
5 pcs pipe
Same as Tensile & tear
Resistance Test
1,100.00
2,400.00
3,500.00
3,600.00
4,800.00
5,000.00
8,400.00
16,800.00
Page 12 of 17
5 pcs (area / pc 45 ± 3
cm3 ) (for 3 size
additional)
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
PHYSICAL AND PERFORMANCE TESTING LABORATORIES
SAMPLE NAME
TEST NAME
TEST METHOD
Compression Set
ASTM D395
Density / Specific gravity
ASTM D792
TEST FEE SAMPLE REQUIREMENT
(PhP)
1,000.00 5 pieces , cylindrical disk
type, 1”diameter
@ 12 mm Thickness
Durometer Hardness
Tensile Strength & Elongation
ASTMD2240 ISO 868 vol.1
ASTM D412
450.00 50 grams , granule, pellets ,
solids 1mm thickness /
1gram
250.00 2 pieces flat surface 10 x 10
cm , t=6mm min
600.00
2 sheets , 305mm x
305mm x t mm (1.3 < t <
3)
Plastic Products
Tear Resistance
Sampling Fee
Abrasion Resistance
ASTM D624
ASTM D4060
Chemical Immersion Test
ASTM D543
Compression (W x H x L)
ASTM D695
Flexural Strength
ASTM D790
600.00/
½ “x ½ “ x 2 , 5 pcs
1,000.00
600.00/
5 pieces , smooth flat
1,000.00 surface , L=16 x thickness
+20mm Depth = 13mm ,
Width 3 to 13mm
Water Absorption
ASTM D570
350.00 50mmL x 25.4mm W, 5 pcs
Tension Test
ASTM D638/
D882
600.00/ 5 pieces dumbbell shape ,
1,000.00 or W= 10 mm to 25.4 mm
(15mm Preferably)
L=125mm to 250 mm
Heat Deflection Temperature
ASTM D648
1,000.00
Vicat Softening Point
ASTM D1525
1,000.00 5 pcs ( L = 50 mm , W = 10
to 20mm , t= 2.4 to 6 mm)
( if t= 2.4 mm , use two
layers of at least t=2.4 total
Thickness )
Izod Impact
ASTM D256
Charpy Impact
ASTM 179
Hardness Test
ASTM 2240
Abrasion Resistance Test
ASTM D4060
600.00
150.00/ test
1,500.00 4” x 4”, 1/8 “t or less, 5 pcs
350.00 50mm L x 25.4mm W, 5 pcs
5 pieces, smooth flat
surface, L =127mm
Width=13mm, Thickness= 3
to 13mm
650.00 L=63.5 or 60.3mm, t=3.17 to
3.4 mm, W= 12.7 mm,
10 pcs
650.00 4.0 mm x 80 mm, 10 pcs
250.00 2 pieces flat surface 10 x 10
cm , t=6mm min
2,000.00
4” x 4” 1/8”t or less
5 pcs
Epoxy
Conditioning ( at least 40 Hrs @ 23 +/2° C , 50 +/- 5 % RH)
Compression
ASTM C356
Plastic Resin
Melting point
ASTM D2117
600.00/
1,000.00
300.00
Melt flow Rate
ASTM D1238
1,000.00
Density
ASTM D792
450.00
PPTL - Schedule of Test Fee
1,000.00
Page 13 of 17
2” x2 “ x 2”, 5 pcs
100 grams ( granules ,
pellets or powder
100 grams ( granules ,
pellets or powder
100 grams ( granules ,
pellets or powder
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
PHYSICAL AND PERFORMANCE TESTING LABORATORIES
SAMPLE NAME
PVC Powder
Particle Board
Adhesive / Sealant
Vinyl Tiles
TEST NAME
Bulk Density/Apparent Density
Density
Block
Pipe
Compression
Flexural
PPTL - Schedule of Test Fee
ASTM D1895
Philsa 106 / App.B/D
ASTM D903
Shear strength
ASTM D1002
Sampling Fee
Tension Test
BS 3261
Tension
Appearance
Peeling Off
Tension After heat Aging @ 100°C for 4
hr.
Load Testing, 50 Tons & 200 Tons
TEST FEE SAMPLE REQUIREMENT
(PhP)
250.00
0.5 kilograms
350.00
5 pcs , 6 “ x 6 “
350.00
1 pipe section
600.00
5 pcs , 6 “ x 6 “
600.00 5 pcs , 12 “ L x 4 “ W x 2 “ T
Water Absorption
Linear shrinkage
Peel strength
Resistance Test/ chemicals
Dimension Test
Size
Thickness
Width
Taber Abrasion
Compression
Joint Filler
Recovery Density
Water Absorption
School and Office Supplies:
Adhesive Strength
Masking / Scotch /
Packaging Tape
Adhesive Strength
Glue
Tensile Strength / Elongation/
Rubber Band
Dimensional Measurements
Ball Point Pens & Refills Writing Performance
Drying Time Test
Water resistance
Writing Performance
White Board Marker
Impact Resistance
Heat Resistance
Shaft Holding Force Point
Primary Erase ability
Writing Performance
Permanent Pen
Impact Resistance
Shaft Holding Force Point
Drying Time
Resistance to Water
Bend Test
Paper Fastener
Breaking Strength
Chalk
Breaking Strength
Pencil
Bending Strength
Lead for Mechanical
Pencil
Performance Test
Crayons
Adhesive Strength
Adhesive Tape
Exposure to Heat 113°C (168 h )
PVC Electrical Tape
Crane and other Lifting
Equipment
TEST METHOD
5 pcs , 6 “ x 6 “
5 pcs , 6 “ x 6 “
10 pcs , 12 “ L x 1 “ W
overlap by 6”
10 pcs , 5 “ L x 1 “ W
overlap by 1 “
ASTM D4060
ASTM D505
350.00
400.00
600.00/
1,000.00
600.00/
1,000.00
150.00
600.00/
1,000.00
350.00
600.00
200.00
200.00
200.00
1,500.00
2,200.00
PNS 712
1,000.00
3 rolls
PNS 1800-2006
PNS 1479
ISO 12757 – 2
PNS 558
PNS 1227
PNS 2049
PNS 235
PNS 1122
PNS 1413
PNS 1471 -3 ( ISO 9177-3
PNS 1224
PNS 712
PNS: 79
600.00
600.00
200.00
400.00
400.00
350.00
400.00
600.00
600.00
400.00
400.00
600.00
600.00
400.00
400.00
400.00
600.00
600.00
600.00
600.00
1,000.00
8,400.00
600.00
250.00
600.00
700.00
ISO 4310
Page 14 of 17
3,500.00
10 pcs , 12 “ x 12 “
4 “ x 4” , 5 pcs
2 pcs , 12“ x 12“
2 jar
1 box or 100 pcs
10 pcs.
15 pcs.
15 pcs
10 pcs.
25 pcs.
10 pcs.
12 pcs. Or 1 box
1 box
5 rolls
10 rolls
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
PHYSICAL AND PERFORMANCE TESTING LABORATORIES
SAMPLE NAME
Burned Refractory Brick
Concrete Interlocking
Roofing Tiles
TEST NAME
Bulk Density
Water Absorption
Transverse
Concrete Hollow Block
Concrete Cylinder
Water Absorption
Compression
Compression
Wire Rod
Tension Test
Flexural/Bend Test
Hydraulic Cement Mortar Compression
Permeability Test/ Fineness of Hydraulic
Cement Powder
Cement
Weathermeter
Initial & Final Setting of cement
Exposure test
TEST METHOD
ASTM C20-Sec 12
Philsa 242
ASTM A370
350.00
1,000.00
5pcs /size
1,000.00 3 pcs, 152.4 mm x 304 mm
with capping
600.00
3 pcs, 13” L
ASTM C109
ASTM C204
600.00
1,000.00
400.00
ASTM C39
ASTM C191
ASTM G155
Observation
PPTL - Schedule of Test Fee
TEST FEE SAMPLE REQUIREMENT
(PhP)
400.00
3 pcs, 50 mm cube
350.00
3 pcs 76.2 mm cube
400.00
6 pcs full size
Page 15 of 17
800.00
6000.00/
day
300.00/
sample
5 pcs, 12” L
3 pcs, min. 50 mm cube
1 kg powder cement
Tray size: 28” x 17.5”
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
BIOLOGICAL LABORATORY
PHARMACOLOGY AND TOXICOLOGY SECTION
SAMPLE NAME
TEST NAME
TEST METHOD
Plant Isolates/ Food
Supplements
Approximate Lethal Dose
Analgesic (Plantar)
Anti-inflammatory Test
Diuretic Test
Acute Oral Toxicity (LD50)
OECD Guideline 401
Hargreaves Method
Winter Method
Lipschitz Method
OECD Guideline 401
TEST FEE
(PhP)
7,900.00
4,800.00
4,200.00
3,800.00
20,000.00
Cosmetics
Preliminary Dermal Irritation
Dermal Irritation
Preliminary Eye Irritation
Eye Irritation
Dermal Sensitization
OECD Guideline 404
OECD Guideline 404
OECD Guideline 405
OECD Guideline 405
OECD Guideline 406
7,250.00
11,750.00
7,250.00
11,750.00
48,500.00
50 g
100 g
50 g
100 g
500 g/1 L
Pesticides
Acute Oral Toxicity (LD50)
Acute Dermal Toxicity
Dermal Irritation
Eye Irritation
Dermal Sensitization
OECD Guideline 401
OECD Guideline 402
OECD Guideline 404
OECD Guideline 405
OECD Guideline 406
42,500.00
52,500.00
20,000.00
25,000.00
48,500.00
1L
1L
1L
1L
1L
Household Pesticides
Acute Oral Toxicity (LD50)
Acute Dermal Toxicity
OECD Guideline 401
OECD Guideline 402
21,200.00
29,000.00
1L
1L
Aerosols, EC
Fumigants, Insect
Sprays
Knockdown and Mortality For
Flying and Crawling Insects
Glass Cylinder Method
33,000.00
Larvicides
Mosquito Larvicidal Test
Probit Method
23,000.00
50g
Lotion, Spray, Soap,
Mothballs
Repellency Test for Mosquitoes
Arm in Cage Method
33,000.00
100 g
Repellency Test for Cockroaches Ebeling Method
33,000.00
100 g
Fumigants, Insect
Spray, EC
Residual Activity Test
Cone Test Method
35,000.00
Mosquito Coil
Knockdown and Mortality For
Flying and Crawling Insects
Glass Cylinder Method
33,000.00
Plant extracts
Knockdown and Mortality Test
Glass Cylinder Method
7,500.00
50 g
Mosquito Larvicides
Probit Method
6,840.00
100 g
Repellency Test
Arm in Cage Method
7,500.00
100 g
50g
Note: Fees are exclusive of laboratory animals and animal feeds.
BIO-PTS - Schedule of Test Fee
SAMPLE
REQUIREMENT
50 g
50 g
50 g
50 g
500 g/1 L
Page 16 of 17
100 g
25g
Industrial Technology Development Institute
STANDARDS AND TESTING DIVISION
SCHEDULE OF FEES AND CHARGES FOR TESTING
AND ANALYTICAL SERVICES
Revision No.
:
Effectivity Date :
4
Oct 1, 2014
BIOLOGICAL LABORATORY
MICROBIOLOGY SECTION
TEST FEE (PhP)
SAMPLE NAME
Water
TEST NAME
Bacteriological Examination A (HPC +
Coliform Count)
Bacteriological Examination B (HPC,
Coliform Count + E. coli Count)
Bacteriological Examination C (HPC,
Coliform Count + Fecal Coliform Count)
Bacteriological Examination D (Total
Coliform Count+ Fecal Coliform Count)
Heterotrophic Plate Count (HPC)
Total Coliform Count
E. coli Count
Pseudomonas sp. Count
Aerobic / Total / Standard Plate Count
Food, Cosmetics,
Extracts, Veterinary Total Coliform Count
Products etc.
E. coli Count
Molds and Yeast Count
Salmonella sp. Detection, Presumptive
(Conventional)
Staphylococcus aureus Count
Pseudomonas sp. Count
Commercial Sterility (Low acid, pH more
than 4.6)
Plant Extracts,
Cosmetics,
Disinfectants etc.
Antimicrobial Activity
(E. coli, S. aureus, P. aeruginosa, S.
typhimurium, B. subtilis)
Antifungal Activity
Single Sample
Testing
1,100.00
TEST METHOD
Standard Methods for the
Examination of Water and
nd
1,700.00 Wastewater (SMEWW) 22
Edition, 2012 APHA, AWWA,
WEF
1,200.00
SAMPLE REQUIREMENT
-At least 120 mL x 1
-FDA Requirement: At least 120
mL x 5
Sample Submission: Mondays,
Tuesdays and Wednesdays 8:00
AM – 12:00 NN
650.00
550.00
550.00
1,000.00
900.00
550.00
Bacteriological Analytical -At least 100 g/mL x 1
550.00 Manual, Online 2001 US Food -FDA Requirement: At least 100
and Drug Administration
g/mL x 5
1,000.00
550.00
900.00
1,200.00
720.00
2,000.00
-At least 100 g/mL x 5
-FDA Requirement: At least 100
g/mL x 10
600.00 The US Pharmacopeia 30 NF -At least 50 mL
25, 2007 (Disc Diffusion
Test depends on the availability
Method)
of cultures especially fungal
cultures
600.00
(S.
cerevisiae, C. albicans, A. niger, F.
monoliforme, T. mentagrophytes,
T. rubrum, Microsporum canis)
Culture Media
Media Quality Control – Growth Promoting
and Inhibitory Properties
1,600.00 The US Pharmacopeia 30 NF -6 Plates / Test tubes of
25, 2007
prepared media
Test is not available for all types
of media
Turn around time: Under normal conditions, Report of analysis is available two weeks from the date of submission. This
maybe extended due to high volume of samples being analyzed at the time of submission.
BIO-MICRO - Schedule of Test Fee
Page 17 of 17