Epson PowerLite Pro G5350NL
INSTALLATION HANDBOOK
Remote Control Information
note
If a button is pressed longer
than 30 seconds, the remote
control stops operating to
conserve battery power.
When you release the
button, normal operation
resumes.
Using the Remote Control
Make sure batteries are installed as described on page 130. Follow
these tips for using the remote control:
Point the remote control at the front of the projector or at the
screen.
Stand within 49 feet (15 meters) of the projector.
Controlling the Picture and Sound
note
Using the remote under
bright fluorescent lamps or
in direct sunlight may affect
projector response.
You can use the remote control to preview and select your picture
sources, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, and adjust the volume.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
The easiest way to select your source is to press the Search button
on the remote control (or the Source Search button on the
projector) repeatedly until you see the image you want on the
screen.
On the remote control, you can press one of the Source buttons
to select the connected device you need.
After you select a source, the screen goes dark for a moment before the
image appears.
1
Epson PowerLite Pro G5350NL
INSTALLATION HANDBOOK
Remote Control Information
Turning Off the Picture and Sound
You can temporarily turn off the image and sound by pressing the
A/V Mute button on the remote control. This turns the image black
and stops the sound. To turn the image and sound back on, press the
button again.
You can have the screen turn blue (using the Display setting as
described on page 107) or display an image such as a company logo
when you press the A/V Mute button. (See page 104 for more
information on displaying an image.)
Stopping Action
Press the Freeze button on the remote control to stop the action in
your video or computer image. The image freezes but the sound
continues.
To restart the action, press the Freeze button again.
note
This function pauses the
image, not the sound.
Because the source continues
to transmit signals, when
you resume the action, it
won’t be at the point you
stopped it.
2
Epson PowerLite Pro G5350NL
INSTALLATION HANDBOOK
Remote Control Information
Zooming Part of Your Image
You can zoom in on a portion of the image using the E-Zoom buttons
on the remote control.
1. Press the E-Zoom
button on the remote control.
You see a crosshair indicating the center of the zoom-in area.
2. Use the
pointer button to position the crosshair.
3. Continue pressing the E-Zoom
area up to 4 times.
button to enlarge the selected
4. While the image is enlarged, you can:
Use the
note
You cannot use the
Progressive or Noise
Reduction features (see
page 98) while you are using
E-Zoom.
pointer button to move around the screen.
Press the E-Zoom
button to zoom out.
5. When done, press the ESC button to return the image to its
original size.
Controlling the Volume
To change the volume, press the
control.
or
button on the remote
note
To temporarily shut off the
sound and picture, press the
A/V Mute button.
You can also adjust the volume using the projector’s menu system.
3