Time and temperature display 25 cm
DESCRIPTION
•Time and temperature display kit to be integrated inside information signs.
•Full set ready for installation in the sign behind a protective glass.
•Single (main display only) or double sided (main + slave displays) kit.
•25 cm red or yellow LED digits.
•Optimal viewing distance 100 metres with a viewing angle of 160°.
•Setting by 2 keys on the casing or wireless remote control.
•Optional radio synchronisation: DCF or GPS antenna.
The display kit must be integrated into a sign with a protective glass front.
Display
•High readability display in day or night conditions thanks to high luminosity SMD LEDs.
•Fix or alternate display of time, date and temperature. Adjustable alternation period (from 2 to 6 seconds).
•Automatic brightness adjustment for sun, cloud and night.
Date display
•Temperature offset adjustment.............
•Display mode.........................................
•Temperatures displayed in degree.........
•Accuracy...............................................
•Display resolution..................................
•Summer/winter time changes................
•Display test...........................................
– 9.5° to + 9.5°.
12 or 24 h.
-55°C to +99°C or -67 °F to +99°F.
± 0.5°.
1°.
Automatic.
Available.
Test mode
Technical features
•Keyboard HF communication.................. 433 MHz radio band (approx. 20m range).
The keyboard (remote control) is powered by a 3V battery (CR2032).
•Slave display.......................................... Powered and controlled by the master.
•Time accuracy........................................ 0.2 second/day.
•Service life............................................ High luminosity LED = 100 000 h. Luminosity = 2000 mcd.
•Digit made............................................. 7 Segment with 16 LED (2 lines with 7 LED).
•Environment.......................................... Indoor or outdoor use in a waterproof sign.
•Electronic cards.................................... Tropicalized.
mEcHaniCAL FEATURES
Master
Slave
[email protected]
>> www.bodet-time.com <<
Non-contractual document. © 2016, Bodet SA. All rights reserved.
Réf.: 643921 N 10/16
•Construction......................................... Black flush-fitting case including LED digits, power unit and control board.
The slave display is delivered apart with the flat cable to be connected to the
master.
•Operating temperature.......................... -20°C to +70°C.
•Humidity............................................... 93 % at +40°C.
•Fixing by............................................... 4 screws 4 mm Ø.
Time and temperature display 25 cm
ElectriCAL FEATURES
•Power supply........................................ 100-240VAC 50/60 Hz.
•Backup of the parameters.................... During power failure.
•Consumption........................................ Single sided = 55W, double sided = 110W.
REfErences
In red
939 142R
939 149R
In yellow
939 142J
939 149J
907 026
907 037
935 011
LED KIT H/T 25cm + wireless remote control
LED KIT H/T 25cm slave display
DCF antenna
GPS antenna
Wire temperature probe (5 metres)
DIMENSIONS
Dimensions in mm
969
648
336
320
9,5
75
20
See product page on
>> www.bodet-time.com <<
[email protected]
>> www.bodet-time.com <<
Non-contractual document. © 2016, Bodet SA. All rights reserved.
Réf.: 643921 N 10/16
L1
L2
H1
H2
D
E1 (master)
E2 (slave)