TECHNICAL DATA SHEET
SENSO
INFORMATION ON USAGE
Substrate preparation
SENSO is a water –based textured finish with opaque,
velvet metallic effect, for interior use. In SENSO plaster the
light merges with matter, thanks to the combination of
iridescent pearls and rough inert particles. This visual
effect is inspired by the Italian renaissance process of
cameo still seen today in the priceless De Medici family’s
collections. SENSO thick plaster is similar to a metallic
stucco and is developed only in delicate color tones,
reminding the reflections of ancient silk and cameos , yet
its versatility allows for both classical and modern textured
effects. SENSO plaster is designed and formulated in Ivas
factory in Italy , uniquely to achieve high hardness,
consistency and durability performances, together with a
VOC level close to zero (5x-10 x less than the average on
the market , providing a uniquely Italian , eco –FRIENDLY
decorative coating.
Masonry , Drywall & Plasterboard substrates:
The substrates should be thoroughly prepared by brushing
manually. Poorly adhering coats of old paint should be
removed or sanded. Make sure that fresh plaster has set
before applying. Apply one coat of Metro Fix followed by
one coat of Metro Cover to provide a smooth substrate.
Pre-painted or varnished wood substrates:
Partially or entirely scrape to remove any loose paint or
varnish remaining or remove the paint entirely using
chemical or solvent paint stripper.
New or old wood substrates already treated as above:
Spot grout to fill any gaps and micro-cracks using Metro
Stuc.
Lightly sand to make the surface to be treated smooth and
even.
Apply one coat of Metro Fix and sand lightly. Next, check
the soundness of the substrate: if there is any dusting or
if there are loose areas, another coat of Metro Fix should
be applied. Apply one coat of Metro Cover to provide a
smooth background.
Thick-coat paint for the topcoat in a one-pack, physical
drying, semi-gloss acrylic dispersed in water
(B4.C.O.A.0.FA)
Type: Mini roller , Gauguin Plastic Trowel , Mondrian Pad,
Stainless Steel Pollock Trowel, Modigliani Serrated
Spatula, depending on the desired effect.
Indoors
Ready to use.
Cementitious plaster, painted plaster, exposed reinforced
concrete, precast concrete panels, fibre cement, wood.
SENSO requires a smooth substrate.
Tape off all adjacent surface with the appropriate saferelease masking tape. Over primed or previously painted
surfaces apply one coat of Metro Coat primer tinted to the
desired color.
Suede Effect: 1- Apply the SENSO using a microfiber roller
sleeve in random curving “X’s”. Be certain to distribute
into corners, ceiling and trim edges to achieve full
coverage. Work an area that you can complete in 5-10
minutes and, while rolling across and down the wall ,
leave random jagged edges rather than straight
rectangular edges to better blend each section as you
complete the surface. 2-While the SENSO is still damp and
workable , gently smooth and flatten the finish in random
curving motions using Gauguin plastic trowel to create a
soft random sueded effect. Be certain to float out and
smooth the jagged edges , as you finish each section
When blending sections , random roll over a portion of the
previous section and gently smooth and soften with the
same random curving technique.
Textile effect: 1- Apply SENSO abundantly using a mini
roller. 2- While still wet, drag horizontally with a Mondrian
Pad and while the SENSO is still damp and workable,
gently smooth and flatten using Stainless Steel Pollock
Trowel.
Name
SENSO
Description
UNI 8681 classification
Equipment
Intended use
Dilution
Suitable substrates
Application
CHARACTERISTICS
Composition/appearance
Physical state: pasty liquid
Type of resin/binder: acrylic (UNI 8681: FA)
Appearance: semigloss-metallic
Dimensional properties
Bulk volume of silver base: 1280 ± 50 g/l
Performance characteristics
pH: 8-9
Colours available
Senso colour chart. Silver Base.
Can be coloured by tinting machine.
APPLICATION
Environmental conditions
Ambient temperature: min +5°C, max +40°C min. +41°F,
max. +104°F)
Relative ambient humidity: max 80%
TECHNICAL DATA SHEET
SENSO
Industrial effect 1-Apply SENSO abundantly using mini
roller. 2- Start working in a random chess board pattern
while leaving 1/8” - 1/4” thick raised edges to your random
rectangular shapes. Allow to partially dry for 10-20
minutes, then repeat the procedure until the depth of the
squared-scratched effect is achieved. 3- Once the SENSO is
slightly dry compress and burnish the entire surface in
horizontal and vertical motions, highlighting the geometric
industrial effect.
Juta wallpaper effect: 1- Roller apply the SENSO in random
curving “X’s”. 2- While the product is still wet , drag
horizontally with a Mondrian Pad (2a) and, with the help
of a second person , drag vertically with Modigliani
serrated spatula (2b).
Steel Effect: Apply two Senso skim coats using a stainless
steel Pollock Trowel, working in different directions to
achieve a wavy effect.
Drying or curing time at ≈ 23°C (73.4°F)
Touch: 3 hours
Recoat: 24 hours
Drying times may vary depending on environmental
conditions and the thickness of the coats.
Coverage
4-7 m2/l (43-75.3 sq ft/l; 160-280 sq ft/US gal)
Coverage varies depending on the type of application.
Overpainting
Compatibility with other products: compatible with all
solvent free products
N.B.
For each specific area, we recommend using paint from
the same product batch, because there may otherwise be
slight differences in shade.
STORAGE
Packaging
1 l - 2.5 l – 3 l
26 fl oz (1 20/32 US pt) – 769 ml
102 fl oz (3 3/16 US qt) – 3.02 l
Storage
Minimum and maximum temperatures: +5°C to +30°C
(+41°F to +86°F)
Stability in original containers: 365 days
SAFETY INFORMATION
Warning advice for the user
See safety sheet
Acceptability of odour
Odourless
Identification of waste material type
Complies with decision 2000/532/EC amended by: 2001/118/EC,
2001/119/EC, 2001/573/EC and subsequent amendments.
Plastic containers:
These can be classified as code 150102. Potentially
treatable as urban waste according to individual local
authority regulations
Metal containers:
These can be classified as code 150104. Potentially
treatable as urban waste according to individual local
authority regulations
If undried paint remains in the containers these can be
classified as code 080112
Dispose of in accordance with local regulations.
N.B. This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are responsible, as
the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
www.metropolis-ivas.com - www.metropolis-ivas.us
Company with quality management system certified UNI EN ISO 9001
Issue 11-2015
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 Fax +39 0541 815815
Distributed in North America by IVAS USA Inc.