ES4-W SERIES TWO-STAGE WATER-TOWATER SYSTEM Jump in to Comfort... Feet First Get comfortable, and let the power of water warm your wonder how you ever lived without it. Go ahead. Discover feet. With our TETCO ES4-W Series, the options are the most efficient source of hydronic heating and cooling endless. As a radiant system, our water-to-water unit available. circulates warm water through tubes installed under the floor. The result leaves your feet toasty warm, and your It’s everything you want - superior comfort, phenomenal room comfortable from the ground up. And that’s just savings, and environmentally friendly. In fact, you can the beginning. It’s also capable of providing domestic hot have it all with this TETCO unit. The U.S. EPA and Natural water, pool and spa heat, and can even melt snow from Resources Canada both recognize geothermal systems driveways and sidewalks. When paired with a fan coil, as the most environmentally friendly and energy efficient water-to-water systems can heat and cool with forced heating and cooling systems on the market today. And air as well. By taking a cue from Mother Nature, you’ll that means you’ll save money and the planet at the same time, all without sacrificing comfort. It’s everything you want- superior comfort, phenomenal savings, and environmentally friendly. Rebates and Incentives Many states/provinces and utilities offer incentives to help you save even more. Ask your TETCO dealer about available rebates or visit dsireusa.org. Mother Nature meets Human Nature Bring the comfort of the earth into your home with a TETCO Geothermal System, and discover why it’s simply the best heating and cooling system you’ll ever install. WATER-TO-WATER SYSTEM ES4-W SERIES Unit Features Engineered to heat water for radiant floors, plus is reversible to provide chilled water for air conditioning. TETCO also offers a selection of hydronic fan coils that are a perfect match for each unit size and application. Two-stage Copeland® UltraTech® compressor offers superior partload performance, providing better humidity control, greater efficiency and quieter operation. Meets ENERGY STAR® requirements. High efficiency TETCO geothermal systems qualify for many state/provincial and utility rebates. Digital controls ensure proper operation, providing a variety of field selectable settings for each installation. Advanced safety controls help protect the equipment. Factory installed desuperheater (hot water generator) allows the capture of free unused heat, which is then used to heat domestic water. This application can cut hot water costs by up to 50%. TETCO has you covered with a full range of warranty options to protect your investment. Talk to your dealer for more details. YEAR STANDARD Insulated cabinet panels combined with compressor isolation provide superior sound/vibration absorption. Unit Performance Model TWT036 TWT048 TWT060 TWT092 How the Process Works Heating Capacity Cooling Btu/hr COP Btu/hr EER Full Load 36,400 3.0 42,000 16.0 Part Load 29,200 3.1 33,300 20.6 Full Load 44,100 3.0 49,400 15.1 Part Load 35,700 3.1 38,800 19.2 Full Load 53,200 3.0 57,800 14.6 Part Load 44,400 3.1 46,100 18.1 Full Load 92,400 3.1 100,200 15.2 Part Load 72,200 3.1 75,700 18.6 TWT120 Nominal 97,400 2.8 114,800 15.4 TWT144 Nominal 109,400 2.7 124,500 13.5 In heating mode, the system circulates fluid in the loop system, extracting heat from the ground. Heat is transferred to the geothermal unit where it is compressed to a high temperature then delivered through the home by a system of ductwork (forced air) or a radiant heat system (hydronic). For cooling, the process is simply reversed. Utilizing the cooler temperature of the earth as opposed to the warm air above ground, the TETCO geothermal system takes the heat from the home and transfers it into the ground via the loop system. Notes: Rated in accordance with ISO Standard 13256-2 which includes Pump Penalties. Heating capacities based on 32°F EST & 104°F ELT. Cooling capacities based on 77°F EST & 53.6°F ELT. Entering load temperature over 120°F heating and under 45°F Cooling is not permissible. Floor heating is most generally designed for 85°F entering load temperature. Notice: Model 144 is outside the scope of the ENERGY STAR program MEMBER Enertech Global is continually working to improve its products. As a result, the design and specifications of each product may change without notice and may not be as described herein. EMTL0002 ©2017 ENERTECH GLOBAL, LLC. www.tetcogeo.com REV: 3JAN2017P
© Copyright 2024 Paperzz