PUNCH MACHINE
MANUAL
Model Νο 2
www.aluminco.com
1
FOR PUNCHING HOLES ON PROFILES, IN THE PRODUCTION OF ALUMINIUM FIXTURES
• 9 punching tools system
• High quality output, long-lasting machine
• Good punching mechanism, powered by gears and gear racks
• Easy to close the press - lever operated punching, spring operated punch returning
• Tool steel punches therm ally treated
• Aluminium-base alloy upper plate and carriage, steel axle
Technical data
Code
ΕΑ010.15PSU.01
Processing materials
Aluminium profiles ( ALUMINCO system)
Working stroke
23mm
Dimensions (length x height x width)
480x380x180mm
Mass
37kg
ALUMINCO profile types for processing
AL410, AL450, AL510, AL520, AL540
OPERATION INSTRUCTIONS
An operator can transport, carry or mount the punch machine without assistance of another person. For safety reasons, it is recommended that two persons handle the device.
Put the device on a strong and stable workbench size 155 x 400mm and secure it with four screws
M10mm (in disposition 130 x 280mm). It is highly recommended that the stand is leveled before
placing the device on it. The device is designed for indoor use. It is easy to operate it and operators need no extensive training.
Device components
13
4
11
14 3 15 9
10
6 7
2
2
5
12 8
1
1
Punching tool
EA010-15.01
2
Punching tool
EA010-15.02
3
Punching tool
EA010-15.03
4
Punching tool
EA010-15.04
5
Punching tool
EA010-15.05
6
Punching tool
EA010-15.06
7
Punching tool
EA010-15.07
8
Punching tool
EA010-15.08
9
Punching tool
EA010-15.09
10
Cover plate
EA010-15.10
11
Base plate
EA010-15.11
12
Guide
EA010-15.12 (2τεμ)
13
Coupling
EA010-15.13
14
Orizontal shaft
EA010-15.14
15
Retro spring
EA010-15.15
! Tools components available only as a set
1. Punching tool ΕΑ010-15.01
ΕΑ010-15.01
Without stopper
Stopper
With stopper
6
6
Profile:
410-301
450-301
510-302, 303, 304, 305
520-302, 303, 304, 305, 306, 308
540-311
2
1
6
10,4
36
10,4
7
3
41
4
10
5
10
1. Bracket
2. Punch
3. Guide
4. Matrix
5. Ring
6. Set of screws
7. Stopper
With stopper
Without stopper
www.aluminco.com
3
2. Punching tool ΕΑ010-15.02
7
Profile:
410-102, 106, 108, 111, 112, 202, 204, 207, 209, 212,
225, 401
450-101, 102, 103. 104, 105, 201, 202, 203, 204, 903
510-101, 102, 103, 104, 105, 106, 107, 108, 109, 112,
113, 115, 116, 117, 121, 201, 202, 203, 204, 205,
207, 208, 209, 210, 211, 213, 215, 221, 401
520-101, 102, 103, 104, 105, 106, 107, 108, 109, 110,
111, 112, 201, 202, 203, 204, 205, 206, 208, 209
540-103, 113, 115, 202, 203, 206, 207, 212, 213, 214,
215
1
2
3
4
6
16
46,1
17,9
11,4
10,5
4
5
6
1. Bracket
2. Punch
3. Guide
4. Matrix
5. Ring
6. Sheets Metals
7. Set of Screws
3. Punching tool ΕΑ010-15.03
7
3
2
1
or
4
6,35
4,95
32,5
5
32,5
32,5
4,95
2
6
3
3
4,5
4,5
Profile:
450-201, 202
520-201, 202, 204, 209
1. Bracket
2. Punch 4,5mm
3. Punch 3,0 mm
4. Guide
5. Matrix
6. Ring
7. Set of Screws
Profile:
450-101, 203, 204, 903
510-205, 211
520-101, 109, 203, 205, 206, 208
www.aluminco.com
5
4. Punching tool ΕΑ010-15.04
3
4
Profile:
450-103, 104, 105
510-102, 103, 104, 105, 115
520- 102, 107, 111, 112
1
2
28
5
6
4
1. Punch
2. Element for Undressing
3. Set of Screws
4. Bracket
5. Holder
5. Punching tool ΕΑ010-15.05
6
5
1
2
Profile:
410-102, 106, 108
450-103, 104, 105
510- 102, 103, 104, 105, 107, 115, 121
520-102, 107, 110, 111, 121
3
4
4
5,8
28
1. Punch
2. Guide
3. Matrix (Left & Right)
4. Ring
5. Bracket
6. Set of Screws
www.aluminco.com
7
6. Punching tool ΕΑ010-15.06
7
1
2
3
4
Prοfile:
410-102, 209, 212, 225
450-201, 202, 203
510-201, 202, 203, 204, 205, 208, 210, 211
520-201, 202, 203, 204, 205, 208, 209
540- 202, 203, 212, 213, 215
86
86
7
7
4,2
10,3
10,3
104
8
104
6
6
5
6
1. Bracket
2. Blade
3. Punch (2pcs)
4. Guide
5. Matrix
6. Ring
7. Set of Screws
7. Punching tool ΕΑ010-15.07
6
2
7
1
3
4
5
1. Punch 1 8mm
2. Punch 1 6mm
3. Guide
4. Matrix
5. Rings
6. Set of Screws
7. Bracket
Prifile:
410-905, 908
8
8
6
8
www.aluminco.com
9
8. Punching tool ΕΑ010-15.08
4
5
1
2
3
Prifil:
410-202, 204, 207, 212, 225
450-201, 202, 203, 204
510-201, 202, 203, 204, 205, 207, 208, 209, 210,
211, 212, 215, 221
520-201, 202, 203, 204, 205, 206, 208, 209
540- 202, 203, 206, 207, 208, 212, 213, 214, 215
4,5
7,5
20
10
1. Blade
2. Matrix
3. Ring
4. Blade Support
5. Set of Screws
9. Punching tool ΕΑ010-15.09
6
2
1
3
Profil:
410-111, 112, 301
450-101, 102, 301, 903
510-101, 106, 109, 113, 114, 117, 301, 302, 305
520-101, 105, 106, 108, 109, 305, 308
540-103, 113, 115, 311
4
5
4
28
1. Blade Support
2. Blade
3. Matrix
4. Matrix Support
5. Ring
5. Set of Screws
www.aluminco.com
11
PUNCH MACHINE
MANUAL
11/2014
12
Aluminium Building Systems Industry - 320 11 Inofita Viotia - Greece
tel. +30 22620 47000 - fax +30 22620 47090 - [email protected], [email protected]