®
Table of Contents
Page Topic
2-13
T-Legs & Post Legs Installation
14
Typical Table Configurations
15
Wire Manager Installation
Groupwork™ Tables
NOTE: To ensure stability and prevent possible
injury, standing height and standard height post
legs with casters are not permitted on any 18"
deep tables and half-round tables smaller than
30 x 60. Standing height post legs with casters
are not permitted on 24 x 42 kidney shape
top and 24 x 48 trapezoid shape tops.
NOTES:
• T-Legs and Post Legs provide a
nominal table height of 28-1/2".
• Glides and casters are
interchangeable, while keeping
the same table height.
• The height range is 25-1/2" to
31-1/2" for adjustable T-Legs and
adjustable Post Legs.
• The height range is 28-1/2" to
45" for standing height adjustable
Post Legs.
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2014 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Page 1 of 15
939503268 Rev G
®
NOTE:
There is no difference in
installation of fixed height
and adjustable height legs.
Attaching Legs to Worksurfaces
Post Leg
(Fixed Height
and Adjustable
Height)
Standing Height
Post Leg
(Adjustable
Height Only)
T-Leg
(Fixed Height
and Adjustable
Height)
CAUTION:
Post legs with casters are not to
be used with 18" deep tables.
See note on page 1 for details.
Page 2 of 15
939503268 Rev G
®
Rectangular Worksurfaces 18" and 24" Deep Pilot Hole Locations
Post Leg
Angled T-Leg
CAUTION:
Post legs with casters are
not to be used with any 18"
deep rectangular tops. See
note on page 1 for details.
A
18"Deep
24"Deep
24"Deep
B
24" x 84"
A
B
18" x 84"
A
NOTE:
Keep screws in the first t-leg loose until the
second t-leg, on the same end, is loosely
attached to the table top. Tighten the screws
starting from the middle of the table top and
working towards the outside corner.
B
24" x 84"
B
A
A
A
B
B
NOTE:
18" deep rectangular
worksurfaces accommodate
post legs only.
Size
(LPL
or
HPL)
Post
Leg
Brace
Size
18x60
18x66
18x72
18x84
24X60
24X66
24X72
24X84
30X60
30X66
30X72
39"
48"
48"
57"
57"
57"
57"
72"
57"
57"
57"
T-Leg
Brace
Size
(inline)
Not needed
Not needed
Not needed
Not needed
Not needed
Not needed
Not needed
Not needed
48"
57"
57"
T-Leg
Brace
Size
(angled)
Not needed
Not needed
Not needed
Not needed
39"
39"
47"
57"
57"
57"
57"
B
A
A
B
Page 3 of 15
939503268 Rev G
®
Post Leg
A
Rectangular Worksurfaces 30" Deep Pilot Hole Locations
Angled T-Leg
T-Leg
B
A
A
A
B
B
B
A
B
NOTE:
Keep screws in the first
t-leg loose until the second
t-leg, on the same end, is
loosely attached to the table
top. Tighten the screws
starting from the middle of
the table top and working
towards the outside corner.
B
A
B
B
A
A
A
B
A
B
B
A
B
A
Page 4 of 15
939503268 Rev G
®
Half Round Table without Cutout and (3) Legs
CAUTION:
Post legs with casters are not to be used on
any half round tops smaller than 30" x 60".
See note on page 1 for details.
Post Leg
A
Post Leg
T-leg
B
A
18" x 36"
24" x 48"
B
A
B
NOTE:
18" x 36" half round table
w/o cutout accommodate
post legs only.
A
B
B
A
A
A
B
B
B
A
B
A
A
B
Page 5 of 15
939503268 Rev G
®
Half Round Table without Cutout and (4) Legs
A
Post Leg
A
Angled T-Leg
and T-leg
B
30" x 60"
30" x 60"
A
B
B
A
A
B
B
A
B
B
B
A
A
A
B
B
B
A
A
A
B
Page 6 of 15
939503268 Rev G
®
Half Round Table with Cutout and (3) Legs
CAUTION:
Post legs with casters are not to be used on
any half round tops smaller than 30" x 60".
See note on page 1 for details.
Post Leg
A
Post Leg
T-leg
B
A
21" x 42"
27" x 54"
B
A
B
NOTE:
21" x 42" half round table
w/ cutout accommodate
post legs only.
A
B
B
A
A
B
A
B
B
A
A
A
B
B
Page 7 of 15
939503268 Rev G
®
Half Round Table with Cutout and (4) Legs
Post Leg
A
Angled T-Leg
and T-leg
B
A
A
30" x 60"
A
B
B
30" x 60"
B
A
A
B
B
B
B
A
A
A
B
B
B
A
A
A
B
Page 8 of 15
939503268 Rev G
®
Personal Tables
Post Leg
Angled T-leg
24" x 42"
KIDNEY SHAPED
NOTE:
18" x 36" personal table
accommodate post legs only.
24" x 42"
A
24" x 42"
KIDNEY SHAPED
NOTE:
Keep screws in the first
t-leg loose until the second
t-leg, on the same end, is
loosely attached to the table
top. Tighten the screws
starting from the middle of
the table top and working
towards the outside corner.
24" x 42"
B
18" x 36"
B
A
B
A
B
CAUTION:
Standing height and standard height
post legs with casters are not to be
used on any of the above mentioned
tops. See note on page 1 for details.
A
B
B
A
B
A
B
A
A
Page 9 of 15
939503268 Rev G
®
Trapezoid Tables
NOTE:
24" x 48" trapezoid tables
accommodate post legs only.
Post Leg
24" x 48"
T-Leg
Angled T-Leg
30" x 60"
30" x 60"
30" x 60"
A
CAUTION:
Standing height post legs with
casters are not to be used on
24" x 48" trapezoid tops. See
note on page 1 for details.
B
A
B
A
NOTE:
Standard height post legs with
casters are allowed on 24" x 48"
trapezoid tops.
B
A
B
A
B
B
A
A
B
A
A
B
B
B
A
A
NOTE:
Keep screws in the first
t-leg loose until the second
t-leg, on the same end, is
loosely attached to the table
top. Tighten the screws
starting from the middle of
the table top and working
towards the outside corner.
B
A
B
Page 10 of 15
939503268 Rev G
®
Triangle Tables
NOTE:
Triangle tables
accommodate post legs only.
A
NOTE:
This product has been culled
as of March 2007.
CAUTION:
Post legs with casters are not to
be used on these triangular tops.
B
24"
Straight
30"
Straight
A
B
36"
Convex
42"
Convex
A
A
B
B
B
A
B
A
Page 11 of 15
939503268 Rev G
®
Square Concave Tables
Post Leg
Angled T-leg
42"
A
A
B
42"
B
36"
36"
A
A
B
B
B
B
A
A
A
B
A
B
Page 12 of 15
939503268 Rev G
®
Corner Bubble Tables
Post Leg
Angled T-leg
NOTE:
This product has been culled
as of March 2007.
A
A
B
36"
36"
B
30"
30"
A
A
B
B
B
B
A
A
B
A
A
B
Page 13 of 15
939503268 Rev G
®
Use style # TSATTIE when requiring (6) Tie Plates and (24) Screws.
Use style # TSATPL14 when requiring a 14" Support Plate and (8) Screws.
Use style # TSATPL20 when requiring a 20" Support Plate and (8) Screws.
Typical Table Configurations
NOTE: Post legs and T-legs are interchangeable
for all configurations. Post legs are shown.
Triangle Table with
Three Rectangular Tables
14"D brackets
for 24"D Tops
24"/30"
20"D brackets
for 30"D Tops
Corner Bubble Table with
Two Rectangular Tables
NOTE:
This product has been culled
as of March 2007.
Two Half Round Tables with
Two Rectangular Tables
27" x 54"
24"
27" x 54"
30"
24"
24"/30"
24"/30"
30"
45º Corner Table with
Two Rectangular Tables
NOTE:
The 18", 24" & 30"
product has been
culled as of March
2007.
18"
90º Corner Table with
Two Rectangular Tables
18"
24" x 48"
NOTE:
The 18" product has been
culled as of March 2007.
24"
24" x 48"
24"
24"
21" x 42"
30"
18"
18"
21" x 42"
30"
18"
Page 14 of 15
939503268 Rev G
®
Modesty Panel Installation
Wire Manager Installation
Prior to May 2007
1.
2.
Place wire manager underneath worksurface where desired.
Attach with three (3) screws.
NOTE: Wire manager can be mounted with the opening towards the
user or away from the user.
1
1.
2.
3.
Place modesty panel hole through bracket bolt.
Fasten with nut and washer.
Position modesty panel and bracket to underside of worksurface. Align modesty
panel bracket with edge of table as shown (3a) and attach bracket to underside of
worksurface using four (4) screws (3b).
1
2
Flush
2
Worksurface
3a
Modesty
Panel
3b
Page 15 of 15
939503268 Rev G