CALLISTO
SERIES
Product Overview and Technical information
>>
luminaire > CAL2
CALLISTO
SERIES
CALM
CAL
CAL1
CAL2
Helping shape a new era / Inspired by classical and
contemporary elements, the Callisto Series casts a timeless light on
any project. The combination of two lighting technologies assures
maximum light control while contributing to the spirit of a project’s
settings and preserving the dark skies. The Callisto is the perfect
choice for those looking for sophistication, unique styling, and
performance.
>>
luminaire > CAL1
FOREVER BEAUTIFUL
Create harmony in any environment with the refined lines of the Callisto Series. Since it combines both
classic and contemporary features, the Callisto Series blends in seamlessly to any project. Walkways, parks,
public areas, and almost any other setting, all benefit from the added safety and harmony created by the
Callisto. With an almost infinite amount of colour and accent combinations, the Callisto will contribute to
the timeless beauty of your projects.
FORM AND FUNCTION
IN HARMONY
Quality of production and attention to detail ensures the Callisto’s durability, even in the most
challenging environments. Smartseal™ (IP66) precision cut-off optics provide long term photometric
performance that control light pollution and minimize light trespass; this creates a more harmonious
nighttime environment that is both comfortable and secure. The Callisto Series offers refinement,
originality, and performance that will surpass even your greatest expectations.
>>
BENEFITS
>>High-quality die-cast acrylic globe with a hydroformed and anodized reflector that guarantees
precise lighting.
>>Unique design with a cage inside the globe that greatly diminishes its vulnerability to outside dirt.
>>Decorative refractor with an integrated colored LED option for orientation and light ambiance.
>>Toolfree access to lamp and electrical components for ease of maintenance.
>>Comes standard with the most efficient HID optics available on the market.
>>Available with metal halide (MH), high pressure sodium (HPS) and compact fluorescent (CF) lamps
sources.
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
>>
CAL
CALLISTO SERIES
LUMINAIRES
Conform to the UL 1598 and CSA C22.2 No. 250.0-08 standards
CAL
CAL-S
CAL2
CAL1
CAL1-S
CAL2-S
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
70
18.0
70
18.0
70
15.5
70
18.0
70
18.0
70
18.0
80
18.0
80
17.0
80
14.0
80
18.0
80
18.0
80
18.0
87.5
18.0
87.5
16.0
87.5
13.0
87.5
18.0
87.5
18.0
87.5
18.0
100
16.5
100
14.5
100
11.5
100
18.0
100
18.0
100
18.0
110
15.5
110
13.5
110
11.0
110
18.0
110
18.0
110
17.5
aluminum
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
steel
SPECIFICATIONS
Pole Shaft
Made from 4» (102 mm) round extruded 6061-T6 aluminum tubing with a 0.226» (5.7 mm) wall thickness, welded to both
bottom and top of the anchor plate.
Maintenance Opening
A 2» x 4 1/2» (51 mm x 114 mm) maintenance opening centered 20» (508 mm) from the bottom of the anchor plate, complete with a
weatherproof aluminum cover and a factory assembled copper ground lug.
Base Cover
Round shape, two-piece, cast 356 aluminum base cover, mechanically fastened with stainless steel screws.
Finish
“Hot dip” chemical etching preperation. Lumital™ polyester powder coat finish. Excellent color retention as per #ASTM D2244,
and outstanding salt-spray resistance according to #ASTM B117 testing procedures.
Hardware
All exposed hardware is stainless steel. All seals and sealing devices are made of and/or lined with EPDM and/or silicone.
OPTIONS
LEDR
LEDG
Stainless steel accent (ST)
LEDB
LEDA
Copper accent (CU)
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
>>
ORDERING INFORMATION
PRODUCT
Lamp
Reflector
VOLTAGE
LUMINAIRE OPTION
POLE HEIGHT 3
POLE OPTIONS
finish 1
CAL
50MH
2V
120
CU
8
16.5
BA4
BE2/TX
CAL1
70MH
4V
208
ST
8.5
17
DR2
BE6/TX
CAL2
100MH
240
LEDA (amber)
150MH
277
LEDB (blue)
9
17.5
35HPS
347
LEDG (green)
9.5
18
50HPS
LEDR (red)
10
70HPS
LEDW (white)
10.5
100HPS
150HPS
18 CF
26 CF
4V
32 CF
GFI2
BE8/TX
PH
BK/TX
S
BR/TX
GN/TX
11
GN4/TX
11.5
GN6/TX
12
GN8/TX
12.5
GY3/TX
13
RD2/TX
13.5
RD4/TX
14
WH/TX
14.5
NP
15
TG
15.5
TS
16
Consult Philips Lumec’s color chart.
120 volt only.
3
Refer to luminaire configuration for maximum height.
4
Specify single or double.
1
2
>
>
>
>
> S: Steel
>C
U: Copper accent
> ST: Stainless steel accent
BA: Banner arm
D
R: Duplex receptable
GFI: Duplex receptable with ground fault interuptor
P
H: Photocell
ORDERING SAMPLE
PRODUCT
Lamp
Reflector
VOLTAGE
LUMINAIRE OPTION
POLE HEIGHT
POLE OPTIONS
finish CAL
100HPS
2V
120
-
12
PH-S
BE2TX
assembly exampleS
CAL
CAL1
CAL2
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
CAL61
CALLISTO SERIES
LUMINAIRES
Conform to the UL 1598 and CSA C22.2 No. 250.0-08 standards
CAL61
CALM
CAL6
CAL6-S
CAL62
CAL61
CAL61-S
CAL62-S
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
Wind speed
(mph)
Maximum
pole height
(ft.)
70
18.0
70
18.0
70
17.0
70
18.0
70
18.0
70
18.0
80
18.0
80
18.0
80
15.5
80
18.0
80
18.0
80
18.0
87.5
18.0
87.5
17.5
87.5
14.5
87.5
18.0
87.5
18.0
87.5
18.0
100
17.5
100
15.5
100
13.0
100
18.0
100
18.0
100
18.0
110
17.0
110
15.5
110
12.0
110
18.0
110
18.0
110
18.0
steel
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
SPECIFICATIONS
Arm
Made of die cast aluminum, mechanically assembled to the pole.
Central Tubing
Made of die cast 356 aluminum, 4’’ (102 mm) outside diameter c/w a tenon that slips 9’’ (229 mm) inside the pole. Mechanically fastened
by two sets of three set-screws at 120 degrees around the pole.
Pole Shaft
Made from 4’’ (102 mm) round extruded 6061-T6 aluminum tubing with a 0.226’’ (5.7 mm) wall thickness, welded to
the pole base.
Pole Base
Made from 6 5/8’’ (168 mm) round extruded 6061-T6 aluminum tubing base with a 0.134’’ (3.4 mm) wall thickness, welded to both bottom
and top of the anchor plate.
Maintenance Opening
A 4’’ x 9’’ (102 mm x 229 mm) maintenance opening centered 21’’ (533 mm) from the bottom of the anchor plate,
complete with a weatherproof aluminum cover and a factory assembled copper ground lug.
Base Cover
Round shape, two-piece, cast 356 aluminum base cover, mechanically fastened with stainless steel screws.
Finish
“Hot dip” chemical etching preperation. Lumital™ polyester powder coat finish. Excellent color retention as per #ASTM D2244, and outstanding salt-spray resistance according to #ASTM B117 testing procedures.
Hardware
All exposed hardware is stainless steel. All seals and sealing devices are made of and/or lined with EPDM and/or silicone.
ORDERING INFORMATION
PRODUCT
Lamp
Reflector
VOLTAGE
LUMINAIRE OPTION
POLE HEIGHT 3
POLE OPTIONS
CAL6, CAL61, CAL62
finish 1
CAL6
50MH
2V
120
CU
8
16.5
BA4
BE2/TX
CAL61
70MH
4V
208
ST
8.5
17
DR2
BE6/TX
CAL62
100MH
240
PH5
CALM
150MH
277
LEDA (amber)
9
17.5
35HPS
347
LEDB (blue)
9.5
18
50HPS
LEDG (green)
10
70HPS
LEDR (red)
10.5
100HPS
LEDW (white)
150HPS
18 CF
26 CF
4V
32 CF
GFI2
BE8/TX
PH
BK/TX
S
BR/TX
GN/TX
11
GN4/TX
11.5
GN6/TX
12
GN8/TX
12.5
GY3/TX
13
RD2/TX
13.5
RD4/TX
14
WH/TX
14.5
NP
15
TG
15.5
TS
16
Consult Philips Lumec’s color chart.
120 volt only.
3
Refer to luminaire configuration for maximum height.
4
Specify single or double.
5
Available only on the CALM model.
1
2
>
>
>
>
> S: Steel
>C
U: Copper accent
> ST: Stainless steel accent
BA: Banner arm
D
R: Duplex receptable
GFI: Duplex receptable with ground fault interuptor
P
H: Photocell
ORDERING SAMPLE
PRODUCT
Lamp
Reflector
VOLTAGE
LUMINAIRE OPTION
POLE HEIGHT
POLE OPTIONS
finish CAL6
100HM
4V
240
LEDR
12
ba
BE2TX
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
assembly exampleS
CAL6
CAL61
CAL62
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
>>
BOLLARD/CALB1
CALLISTO SERIES
LUMINAIRES
Conform to the UL 1598 and CSA C22.2 No. 250.0-08 standards
SPECIFICATIONS
Hood
Made of die cast 356 aluminum, assembled mechanically.
Lens
Made of glass.
Louvers
Made of die cast 356 aluminum, assembled mechanically.
Base
Made of die cast 356 aluminum, mechanically assembled to the anchor plate.
Ballast
High power factor of 98%. Electronic compact fluorescent ballast, operating range: 50 Hz-60 Hz. Programmed rapid start. Lamp starting
capacity of 0°F (-18°C), c/w auto reset shutdown circuit. Assembled on a tray with quick disconnect plug.
6LEDA/6LEDB/6LEDG/6LEDR/6LEDW
Lamp
6-watt light-emitting diodes (LEDs).
Driver
High power factor of 90%. Electronic driver, operating range 50 Hz-60 Hz. Lamp starting capacity of -40°F (-40°C). Assembled on a tray
with quick disconnect plug.
Finish
“Hot dip” chemical etching preperation. Lumital™ polyester powder coat finish. Excellent color retention as per #ASTM D2244, and
outstanding salt-spray resistance according to #ASTM B117 testing procedures.
Hardware
All exposed hardware is stainless steel. All seals and sealing devices are made of and/or lined with EPDM and/or silicone.
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
ORDERING INFORMATION
PRODUCT
Lamp
VOLTAGE
CALB1
50MH
120
PH
BE2/TX
70MH
208
VPA
BE6/TX
35HPS
240
50HPS
277
70HPS
347
BOLLARD OPTIONS
finish 1
BE8/TX
BK/TX
18CF
BR/TX
26CF
GN/TX
32CF
GN4/TX
42CF
GN6/TX
GN8/TX
GY3/TX
RD2/TX
6LEDB (blue)
120
6LEDR (red)
208
6LEDW (white)
240
RD4/TX
WH/TX
NP
TG
TS
>C
U: Copper coated decorative grid
> P H: Photocell
> VPA: Vandalproof hardware
Consult Philips Lumec’s color chart.
1
ORDERING SAMPLE
PRODUCT
Lamp
VOLTAGE
LUMINAIRE OPTION
finish CALB2
50HPS
240
PH VPA
BE2TX
>>
BOLLARD/CALB2
CALLISTO SERIES
LUMINAIRES
Conform to the UL 1598 and CSA C22.2 No. 250.0-08 standards
SPECIFICATIONS
Hood
Made of die cast 356 aluminum, assembled mechanically.
Lens
Made of glass.
Louvers
Made of die cast 356 aluminum, assembled mechanically.
Base
Made of die cast 356 aluminum, mechanically assembled to the anchor plate.
Ballast
High power factor of 98%. Electronic compact fluorescent ballast, operating range: 50 Hz-60 Hz. Programmed rapid start. Lamp starting
capacity of 0°F (-18°C), c/w auto reset shutdown circuit. Assembled on a tray with quick disconnect plug.
6LEDA/6LEDB/6LEDG/6LEDR/6LEDW
Lamp
6-watt light-emitting diodes (LEDs).
Driver
High power factor of 90%. Electronic driver, operating range 50 Hz-60 Hz. Lamp starting capacity of -40°F (-40°C). Assembled on a tray
with quick disconnect plug.
Finish
“Hot dip” chemical etching preperation. Lumital™ polyester powder coat finish. Excellent color retention as per #ASTM D2244, and
outstanding salt-spray resistance according to #ASTM B117 testing procedures.
Hardware
All exposed hardware is stainless steel. All seals and sealing devices are made of and/or lined with EPDM and/or silicone.
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
ORDERING INFORMATION
PRODUCT
Lamp
VOLTAGE
CALB2
50MH
120
PH
BE2/TX
70MH
208
VPA
BE6/TX
35HPS
240
50HPS
277
70HPS
347
BOLLARD OPTIONS
finish 1
BE8/TX
BK/TX
18CF
BR/TX
26CF
GN/TX
32CF
GN4/TX
42CF
GN6/TX
GN8/TX
GY3/TX
RD2/TX
6LEDB (blue)
120
6LEDR (red)
208
6LEDW (white)
240
RD4/TX
WH/TX
NP
TG
TS
> P H: Photocell
> VPA: Vandalproof hardware
Consult Philips Lumec’s color chart.
1
ORDERING SAMPLE
PRODUCT
Lamp
VOLTAGE
LUMINAIRE OPTION
finish CALB2
50HPS
240
PH VPA
BE2TX
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
>>
PHOTOMETRY
High-Intensity Discharge Sources
2V
Type II
Asymmetrical distribution spreads light
forward and on both sides.
Recommended applications
> Pedestrian walkway/bicycle path
> Building entryway
> Narrow roadway
> Interior and exterior pedestrian malls
4V
Type IV
Asymmetrical distribution spreads light
forward.
Recommended applications
> Parking lot
> Interior and exterior pedestrian malls
> Building perimeter (security)
> Roadway
CAL
Compact Fluorescent
4V
Type III
Asymmetrical distribution spreads light
forward.
Recommended applications
> Interior and exterior pedestrian malls
> Building entryway
> Entry hall and drop-off area
Philips Lumec reserves the right to substitute materials or change the manufacturing process of its products without prior notification.
For the latest updates go to www.lumec.com
CAL61
CALM
luminaire > CAL
www.lumec.com
PHILIPS LUMEC HEAD OFFICE
ONTARIO OFFICE
T: 450.430.7040
F: 450.430.1453
T: 416.223.7255
F: 866.971.2825
640, Curé-Boivin Boulevard
Boisbriand, Québec
Canada J7G 2A7
189 Bullock Drive
Markham, Ontario
Canada L3P 1W4
For the details of our different agents and representatives, please consult the Contact us
section of our Website.
© 2010 Philips Group.
All rights reserved. We reserve the right to change details of design, materials and finishes.
/ Some luminaires use fluorescent or high intensity discharge (HID) lamps that contain
small amounts of mercury. Such lamps are labeled ‘‘Contains Mercury’’ and/or with the symbol
‘‘Hg.’’ Lamps that contain mercury must be disposed of in accordance with local requirements.
Information regarding lamp recycling and disposal can be found at www.lamprecycle.org
>>
The choice to not print paper brochures anymore but to make them available on-line
is an example of the positive environmental actions that Philips Lumec has decided to
undertake. This not only considerably reduces our paper consumption but also guarantees
the exactitude of the information our clients receive.