ROYAL PAVILION ROUND DOLL
CRIB WITH CANOPY BEDDING
Assembly and Use Instructions. Adult assembly Required.
Read all instructions before use.
This manual is part of the product and
must be saved for future reference.
MODEL NUMBER*:
17900
VERSION CODE*:
3.0/0514/HF
* Model and Version numbers are needed
if replacement parts are requested
If you need product
parts, see below or Page 2!
FOR REPLACEMENT PARTS:
Go to our web site: http://www.badgerbasket.com/parts
Or scan QR code at right with your smartphone
3.0/0514/HF
BEFORE YOU BEGIN ASSEMBLY:
Check all parts. If anything is missing or not
satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When contacting us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: 17900
Your Version Code is: 3.0/0514/HF
CARE INSTRUCTIONS:
The canopy, liner/skirt, and padded mat are all removable for cleaning. For longevity of the
product, hand wash in cold water with mild detergent. Allow to Air Dry.
If you machine wash, please use cold water and gentle cycle and tumble dry low or no heat.
Wipe the metal/plastic frame clean as needed with a damp cloth and dry thoroughly.
WARNING
ADULT ASSEMBLY REQUIRED
DUE TO THE PRESENCE OF SMALL PARTS AND SHARP POINTS
DURING ASSEMBLY, KEEP OUT OF REACH OF CHILDREN UNTIL
ASSEMBLY IS COMPLETE.
WARNING - CAUTION
READ ALL INSTRUCTIONS before use of this
product. Use only the parts and hardware provided
by Badger Basket. Keep instructions for future use.
Do not use the product if it is damaged or broken. Periodically inspect the
product to ensure all parts remain tight. This item is a toy for dolls only. It
is never to be used for real infants or pets. No product is a substitute for
adult supervision. Always supervise your child during play.
For children ages three (3) years and older. Never sit or stand on the toy.
Badger Basket Company, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: 715-352-2311 • Fax: 715-352-3163
3.0/0514/HF
PARTS INCLUDED:
A x 4 - CURVED CRIB SIDE PANELS
C x 4 - CASTER WHEEL POSTS
E x 1 - ROUND BOTTOM PANEL
G x 4 - CURVED CANOPY SUPPORTS I x 1 - FABRIC CANOPY WITH DRAPES
B x 4 - VERTICAL FRAME POSTS
D x 1 - FABRIC LINER/SKIRT
F x 1 - ROUND FABRIC PADDED MAT
H x 2 - CANOPY RODS
STEPS FOR ASSEMBLY:
1. Assemble the round crib frame using the
(A x 4) Crib Side Panels, (B x 4) Vertical Frame
Posts, and (C x 4) Caster Wheel Posts.
(1)
(2)
2. Insert the (D x 1) Fabric Liner/Skirt and snap
the eight snaps to secure it around the top rim
of the frame.
(3)
3. Insert the (E x 1) Round Bottom Panel.
4. Insert the (F x 1) Round Fabric Padded
Mat.
(4)
(5)
5. Using the outer holes at the tops of the
(B x 4) Vertical Frame Posts, insert the (G
x 4) Curved Canopy Supports.
6. Thread the (H x 2) Canopy Rods
through the fabric guide channels on the
(I x 1) Fabric Canopy with Drapes. They
will cross in the center like a ‘X’.
(6)
(8)
7. Insert the ends of the (H x 2)
Canopy Rods into the center holes at
the tops of the (B x 4) Vertical Frame
Posts.
Arrange the (I x 1) Fabric canopy and tie
the Drapes to the posts.
Also, there are four holes in the canopy
for the round finials at the top of the (B x
4) Vertical Frame Posts.
(7)
8. The Doll Crib is now assembled!
If your doll needs more privacy, untie the
drapes and let them hang to fully
enclose the crib.
3.0/0514/HF