[Digitare il testo]
Doc. n°: 11C141050 Rev.00 Date: 14/03/2011
ANGLE TEE ‐ TYPE STRAINERS FATE M.Ghisoni Pag.1/3
SIZES
GENERAL NOTE ‐ STRAINERS PRODUCTION Permanent filter, right angle, suitable for filtering fluids in either the liquid state (water, seawater, petroleum and its derivatives) or the gaseous state (gas, air, chemical products) through a perforated plate filter element placed perpendicular to the direction of flow. Obtained from an extruded or welded T‐joint, it ensures a large surface area for flow and thus offers a high filtration capacity with a low loss of capacity even at high speeds. The standard equipment includes a screen suitable for high pressures, which is easy to maintain and replace and capable of filtration of more than 300% of the inlet area. OPEN AREA RATIO= 100 x Mesh Open Area x Screen Area Inlet area (The calculations are based on the filtering percentage of the mesh’s surface area only.) All of Blu Zac products have been designed to satisfy the requests and specific requirements of the customer, including high pressure applications. Designed and fabricated to ASME VIII Div.1 as standard but can also be supplied to other pressure vessel codes. I.e. ASME B31.3 etc. SIZES 2”‐ 3”‐ 4”‐ 6”‐ 8”‐ 10”‐ 12”‐ 16”‐ 18”‐ 20”‐ 24” CONNECTIONS Buttweld BW ANSI B16.25 Flanged FLG ANSI B16.5 GENERAL NOTE ‐ STRAINERS STANDARD PRODUCTION
INSTALLATION Internal Flow External Flow COVER Bolted Cover DRAIN Drain NPT Bolted Cover with Hinge Drain Flanged+Blind SUPPORT Without support With support BASKET Cylindrical Bolted Cover with Davit Blu Zac srl reserves the right to carry-out any necessary modification without prior notice
[Digitare il testo]
Doc. n°: 11C141050 Rev.00 Date: 14/03/2011
ANGLE TEE ‐ TYPE STRAINERS FATE DIMENSION TOLLERANCE DIMENSION* SIZE TEE S SF & A H & H1 1/2" to 2.1/2" ± 3,2 ± 5 3" to 4" ± 3,2 ± 5 6" to 8" ± 3,2 ± 5 10" to 18" ± 4,6 ± 7 20" to 24" ± 4,6 ± 7 26" to 30" ± 6 ± 8 32" to 48" ± 9,6 ± 12 *S, SF, A, H and H1 are in millimeters (mm) Size 150RF 300RF 600RF 900RF 1500RF S 2500RF (mm) 150RJ 300RJ 600RJ 900RJ 1500RJ 2500RJ 150RF 300RF 600RF 900RF 1500RF SF 2500RF (mm) 150RJ 300RJ 600RJ 900RJ 1500RJ 2500RJ 150RF 300RF 600RF 900RF 1500RF A 2500RF (mm) 150RJ 300RJ 600RJ 900RJ 1500RJ 2500RJ 150RF 300RF 600RF 900RF 1500RF H 2500RF (mm) 150RJ 300RJ 600RJ 900RJ 1500RJ 2500RJ 150RF 300RF H1 600RF (mm) 900RF 1500RF 2500RF 2" 194
200
209
238
238
263
198
206
211
240
240
265
259
265
275
304
304
329
264
272
276
305
305
330
130
136
145
174
174
199
134
142
147
176
176
201
216
226
245
280
286
324
226
238
248
283
289
327
528
543
553
611
610
661
3" 244
253
263
282
298
349
249
260
265
284
299
352
316
325
335
354
370
421
321
332
336
355
371
424
158
167
177
196
212
263
163
174
179
198
213
266
271
285
305
330
356
425
281
298
308
333
359
431
641
663
673
711
743
847
4" 5" 6" 288 339 377 298 348 386 320 371 412 333 383 434 342 412 466 409 485 568 293 344 382 304 355 393 322 372 413 334 385 436 344 414 469 414 491 574 366 430 468 376 439 477 398 462 503 411 474 525 420 503 557 487 576 658 371 435 473 382 446 484 400 463 504 412 476 527 422 504 560 492 582 665 183 215 234 193 224 243 215 247 269 228 259 291 237 288 323 304 361 425 188 220 239 199 231 250 217 248 270 229 261 293 239 290 326 309 367 431 316 366 406 333 387 427 368 425 470 387 444 500 406 495 558 495 587 685 325 376 415 346 400 439 371 428 473 390 447 503 409 498 565 504 599 698 742 869 945 764 891 967 799 926 1009
825 952 1053
844 1009 1120
984 1164 1329
M.Ghisoni Pag.2/3
8" 460 469 498 526 577 682 464 475 499 528 582 690 563 573 601 630 681 786 568 579 603 631 685 793 282 291 320 348 399 504 286 297 321 350 404 512 492 514 563 600 679 819 501 526 566 603 688 835 1136
1158
1206
1263
1371
1587
10" 536 552 593 625 694 860 540 558 594 626 699 871 639 655 696 728 798 963 644 661 698 730 803 974 320 336 377 409 478 644 324 342 378 410 483 655 569 603 666 704 812 1035
579 615 669 707 822 1057
1288
1323
1396
1459
1605
1948
12" 624 640 672 716 799 980 629 647 674 718 807 991 741 757 788 833 915 1096 745 763 790 834 923 1107 370 386 418 462 545 726 375 393 420 464 553 737 660 695 748 806 933 1174 669 707 751 809 949 1196 1491 1526 1580 1668 1846 2215 14" 687 703 732 779 865 ‐ 692 709 733 784 874 ‐ 816 832 861 908 994 ‐ 821 838 862 913 1003 ‐ 408 424 453 500 586 ‐ 413 430 454 505 595 ‐ 726 760 811 875 1008 ‐ 735 773 814 884 1027 ‐ 1642 1676 1724 1826 2007 ‐ Blu Zac srl reserves the right to carry-out any necessary modification without prior notice
16" 739 758 796 834 930 ‐ 744 764 798 839 941 ‐ 868 887 925 963 1059 ‐ 873 893 927 968 1070 ‐ 434 453 491 529 625 ‐ 439 459 493 534 636 ‐ 779 819 882 933 1086 ‐ 789 831 885 943 1108 ‐ 1746 1787 1853 1936 2139 ‐ 18" 828 847 879 923 1022
‐ 832 853 880 929 1033
‐ 969 989 1020
1065
1163
‐ 974 995 1022
1071
1174
‐ 485 504 536 580 679 ‐ 489 510 537 586 690 ‐ 871 911 971 1035
1194
‐ 880 923 974 1047
1216
‐ 1948
1990
2044
2142
2349
‐ 20" 909 926 961 1018
1126
‐ 913 934 964 1024
1137
‐ 1055
1072
1107
1165
1273
‐ 1060
1080
1111
1171
1284
‐ 528 545 580 637 745 ‐ 532 553 583 643 756 ‐ 955 993 1060
1136
1314
‐ 964 1009
1066
1149
1336
‐ 2120
2161
2221
2342
2567
‐ 24" 1018
1034
1076
1165
1279
‐ 1023
1044
1080
1174
1293
‐ 1173
1189
1230
1319
1433
‐ 1178
1198
1235
1328
1447
‐ 586 602 644 733 847 ‐ 591 612 648 742 861 ‐ 1070
1108
1187
1314
1492
‐ 1079
1127
1197
1333
1520
‐ 2355
2396
2469
2657
2895
‐ [Digitare il testo]
Doc. n°: 11C141050 Rev.00 Date: 14/03/2011
ANGLE TEE ‐ TYPE STRAINERS FATE POS DESCRIPTION 1 2 3 4 Body Flange Blind flange Basket 5 Gasket 6 7 8 9 10 11 12 Studs Nuts Drain Handle Davit Hinge Support M.Ghisoni Pag.3/3
MATERIALS MATERIALS MATERIALS MATERIALS SPARES ASTM A234 WPB ASTM A105 ASTM A105 AISI 304 or 316 SPW: F‐Graphite W‐316 IR‐316 OR‐CS ASTM A193 B7 ASTM A194 Gr.2H ASTM A105 Carbon Steel Carbon Steel Carbon Steel Carbon Steel ASTM A420 WPL6 ASTM A350 LF2 ASTM A350 LF2 AISI 304 or 316 SPW: F‐Graphite W‐316 IR‐316 OR‐CS ASTM A320 L7 ASTM A194 Gr.4 ASTM A350 LF2 Carbon Steel Carbon Steel Carbon Steel Carbon Steel ASTM A403 WP304 ASTM A182 F304 ASTM A182 F304 AISI 304 or 316 SPW: F‐Graphite W‐316 IR‐316 OR‐CS ASTM A193 B8 ASTM A194 Gr.8 ASTM A182 F304 Carbon Steel Carbon Steel Carbon Steel Carbon Steel ASTM A403 WP316 ASTM A182 F316 ASTM A182 F316 AISI 304 or 316 SPW: F‐GraphiteW‐316 IR‐316 OR‐CS ASTM A193 B8 ASTM A194 Gr.8 ASTM A182 F316 Carbon Steel Carbon Steel Carbon Steel Carbon Steel X X Note 1: Other Materials and Dimensions on Request Note 2: Detail 10,11 and 12 are optional if required to client. Note 3: When the Tee material is Stainless Steel, standard accessories Hinge, Davit and Support will be in Carbon Steel material; HOW TO MAKE FACILITIES SERVICES Usually, the maintenance of the filters should be done once a year or when the pressure drop exceeds the normally expected pressure drop. Important: check system at least once a month and, if possible, undertake a quick cleaning. HOW TO MAINTAIN: 1. Before starting, wear the required safety equipment and follow all plant safety procedures. 2. Stop the main line to make sure that no residues of dangerous waste fluid could be emitted. 3. Unscrew cover studs(8) and nuts(9), then remove the blind flange(3) and gasket(7). 4. Remove the basket(4), clean the block with compressed air or any other appropriate tools. Inspect thoroughly to check for any damage; if the basket is damaged or deformed, it must be replaced with a new one. 5. Thoroughly clean the inside of the vessel before inserting the filter basket. 6. Install the basket in the body(1). 7. Replace the gasket(7). 8.Reposition the blind flange (3), then screw the studs(8) and nuts(9) of the cover. 9. Slowly start the plant and check if there are any line losses. 10. Apply a label to the filter with the maintenance date. ORDER CODE i.e. FATE 10” 150RF BW‐XS WPB/F304 M3‐O6 +DRAIN ¾” NPT Blu Zac srl ‐ Piazzetta Armando Raggio 1 ‐ 29010 Pontenure (PC) ‐ T +39 0523 516241 ‐ F +39 0523 510804 [email protected] – www.bluzac.com ‐ Cap. Soc. Euro 100.000 ‐ CF/PI 07104620963 Blu Zac srl reserves the right to carry-out any necessary modification without prior notice