CRL INSULATING GLASS SUPPLIES
For Pricing Visit crlaurence.com or Call Us Toll Free
at the Phone Numbers Shown on the Back Cover
CRL SS96 Hot Melt Butyl Gunning System
Handgun Assembly
(Included with SS96)
• An Efficient Machine for Insulating Glass Fabrication
• Dispenses CRL30703 Hot Melt Butyl Cakes
• Includes 8' Flexible Hose and Handgun
• Our Most Popular Model
The CRL Hot Melt Butyl Gunning System is compact and
versatile. Its unique pumping action eliminates entrapped air
in the sealant. The pump has a 10 pound (4.53 kg) tank
capacity with a temperature range from 100°F to 425°F
(37°C to 217°C). CRL Hot Melt Butyl can be added while
gunning, and an adjustable flow control valve knob
regulates the sealant output.
An 8' (2.4 m) Flexible Hose with variable 350°F to 450°F
(177°C to 232°C) temperature control is coupled with a
lightweight, heated handgun that features a swivel and
trigger lock action. Two adjustable temperature controllers
located inside the electrical enclosure regulate the
temperature of the melting tank and the handgun/hose
assembly. The SS96 does not use compressed air, and
operates quietly. The mechanical and electrical systems
contain few moving parts, resulting in less down time and
low maintenance operation. Total shipping weight, including
wood crate, is 120 pounds (54 kg).
CAT. NO.
DESCRIPTION
Hot Melt Butyl Gunning System
8' (2.4 m) Replacement Heated Hose
Replacement Handgun Assembly
SS96
SS26263N
SS75085000
8' (2.4 m) Heated Hose
(Included with SS96)
SS96 SPECIFICATIONS
ELECTRICAL
Voltage - 115 VAC, 60 Hz with ground
240V Models Available on Special Order
Wattage - 1265 Watts
Motor Rating - 1/6 hp, gearbox
38 rpm output
Warm-Up Time - 45-60 minutes
FUNCTIONAL
Melt Rate - 8 lbs. (3.6 kg)/hour
Pump Output Rate (Maximum) - 40 lbs.
(18.1 kg)/hour
Tank Temperature Range - 100-425°F
(37-217°C)
Tank Capacity – 10 Lb. (4.5 kg)
Gun/Hose Temperature Range 350-450°F (177-232°C)
Minimum order: 1 each. SS96 must ship common carrier only.
CRL Insulating Glass Hot Trim Knife CRL Brass Tip Nozzles
• Speeds Up I.G. Unit Production
• Works on Standard 110V AC Power
• Speeds the Application of
Insulating Glass Sealant
• Made From Solid Brass
The CRL Insulating Glass Hot Trim Knife trims excess
hot melt butyl from single or stacked units. It's the fast and
efficient way to finish off single or dual sealed hot melt butyl
units. This light, easy to handle Knife also can be
used to cut up large slugs of hot melt butyl sealant for
faster melting in a thermal extruder system.
Replacement Tips are available when the current Tip on
your Hot Trim Knife becomes worn and caked with excess
butyl. Made from solid brass, these Tips can be used for
quite a long time before they need to be replaced.
CAT. NO.
DESCRIPTION
1BK990
RT90
Hot Trim Knife With Tip
Replacement Tip
Minimum order: 1 each.
CRL Brass Tip Nozzles may be
used with almost all automated
sealant dispensing systems. These
Nozzles have a ridge that fits
between the lites of glass to make
the application of hot melt butyl
much smoother. Nozzles may be
used with our HEG522 or SS96,
and all other hot melt extruders.
Brass Tip Nozzle
BRASS TIP NOZZLES
CAT. NO.
BN3
BN4
BN5
BN6
BN7
BN8
BN10
BN12
SIZE
3/16" (4.8 mm)
1/4" (6.3 mm)
5/16" (7.9 mm)
3/8" (9.5 mm)
7/16" (11.1 mm)
1/2" (12.7 mm)
5/8" (15.9 mm)
3/4" (19 mm)
Brass Pipe Nipple
CAT. NO. E9133
The CRL Brass Pipe Nipple works
with the Cat. No. HEG522 Hot Extruder
Gun and allows for the attachment of
CRL Brass Tip Nozzles. Minimum order
is one each.
Minimum order: 1 each.
C.R. LAURENCE COMPANY
602K |
crlaurence.ca
crlaurence.com.au
crlaurence.com
crlaurence.co.uk
|
usalum.com
crlaurence.de
crlaurence.eu