Catalog
Number
Notes
FEATURES & SPECIFICATIONS
INTENDED USE — For square aluminum poles.
Type
CONSTRUCTION — Aluminum: Body is square aluminum tube constructed from 6063-T6 alloy. Welding
follows AWS standards. Bullhorns are treated to T6 temper after welding.
Must specify finish. Optional polyester powder and red primer paint finishes available.
Square Bullhorn
INSTALLATION — Mounting hardware included.
WARRANTY — 1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
SBA
NOTE: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
ALUMINUM (SBA) SQUARE BULLHORN
ORDERING INFORMATION
Recommended to be ordered with pole to ensure proper fit.
Lead times will vary depending on options selected. Consult with your sales representative.
Example: SBA28-4C DDB
–
Series
SBA28
SBA38
SBA48
SBA49
SSA pole shaft side dimension1
Two in line
Three in line
Four in line
Four at 90°
4C
4G
5G
6G
6J
4" wide, 0.125" wall thickness
4" wide, 0.188" wall thickness
5" wide, 0.188" wall thickness
6" wide, 0.188" wall thickness
6" wide, 0.250" wall thickness
Finish2
Standard colors
DDB
Dark bronze
DWH
White
DBL
Black
DMB
Medium bronze
DNA
Natural aluminum
BA
Brushed aluminum
Classic colors
DSS
Sandstone
DGC
Charcoal gray
DTG
Tennis green
DBR
Bright red
DSB
Steel blue
Class 1 architectural anodized
ABL
Black
ADB
Dark bronze
ANA
Natural aluminum
Architectural colors
(powder finish)
Notes:
1. SBA slip fitter tubing used must have same side dimension and wall thickness as the SSA pole it is to mount
onto. If ordering for retrofit application to mount onto existing SSA pole the shaft size and wall thickness
dimensions must be specified in the nomenclature.
2. Finish must be specified. Additional colors available; see www.lithonia.com/archcolors or the Architectural
Colors brochure (Form No. 794.3).
OUTDOOR POLE-SBA
SBA Square Bullhorn, Square Aluminum Poles
C
C
2-3/8”
3’ - 0”
2-3/8”
5’ - 0”
A
A
1-1/4” dia. wire hole
with 1” inner dia. rubber
grommet (typ.)
2” pipe tenon assembly
5/32” drill (2 @ 180°)
5/16” drill (4) holes
for 1/4” - 20NC x 1” long
S.S. hex. hd. screws with
2-1/2”
1-1/8”
2-5/8”
A
A
6”
3/8”
2” sch. 40 pipe x B
alloy 6063-T6
2” sch. 40 pipe x B alloy 6063-T6 (typ.)
5”
3/8”
1/4
6”
3/8”
1/4
Alum. cap with S.S. screws
10”
1/4
1-1/4” dia. wire hole
with 1” inner dia.
rubber grommet (2 @ 180°)
5”
1-1/2”
5”
5/32” drill (2 @ 180°) (typ. each end)
3” sq. alum. tube x .125” wall x
2’ - 5-7/8” long alloy 6063-T6
3” sq. alum. tube x .125” wall x 1’ - 6-3/8” long alloy 6063-T6
3-1/2”
5” sq. alum. tube (1/2” radius) x .188” wall x 10” long alloy 6063-T6
Sq. alum. tube (with 1/2” corner radius) x 10” long alloy 6063-T6
3/8” drill (2 per angle) for
1/4” - 20NC x 1” long S.S.
allen head screws, hex. nuts,
1/4” corner brace x 10” long alloy 6063-T6 (2 required)
1-7/8” (typ.)
2-3/8”
1/4
View A-A
C
A
A
A
1’ - 3”
C
4’ - 0”
2-3/8”
2-3/8”
A
2” sch. 40 pipe x B
alloy 6063-T6 (typ.)
2” sch. 40 pipe x B
alloy 6063-T6 (typ.)
3” sq. alum. tube x .125” wall
x 3’ - 8-3/8” long alloy 6063-T6
Sq. alum. tube x
10” long alloy 6063-T6
Sq. alum. tube x 10” long alloy 6063-T6
Sq. alum. tube x
1’ - 11-7/8” long
alloy 6063-T6 (4 @ 90°)
POLE DATA
Lithonia Lighting
Catalog Number
Nominal Arm
Length (feet)
SBA28
Dimensions (inches)
Bracket
weight
(lbs.)
Max. EPA ft2 per
arm @ 100 mph
w/1.3 gusts
Max. fixture
weight per
arm (lbs)
Anchor bolt
description
A
B
C
Bracket
EPA (ft2)
1-1/2
18
6
40
0.80
12
5.3
100
AB18-0
SBA38
2-1/2
30
6
64
1.50
17
6.0
100
AB30-0
SBA48
4
45
6
94
2.25
22
4.0
75
AB30-0
SBA49
2
24
6
53
1.70
22
6.0
100
AB36-0
IMPORTANT:
These specifications are intended for general purposes only. Lithonia Lighting reserves the right to change material or design, without prior notice, in a continuing effort to upgrade its products.
CAUTION:
The arms described herein are designed for applications in areas of normal winds. Consult the factory prior to the design of systems to be mounted on structures such as bridges or buildings, or areas known to have
abnormal winds such as airports or coastal areas. Failure to consider these factors in the system design could result in the failure of the pole or mast arm, and consequently personal injury or property damage.
OUTDOOR:
One Lithonia Way Conyers, GA 30012
Phone: 770-922-9000
www.lithonia.com
POLE-SBA
©2010-2017 Acuity Brands Lighting, Inc. All rights reserved.Rev. 03/03/17