™
PRODUCT MANUAL
Magic Rainbow 4 Zone Light Bulb System
Toll Free. 866-592-3873
www.SolidApollo.com
[email protected]
RGB-W 4 Zone Lightbulbs
Magic Rainbow 4 Zone Light Bulb System
Solid Apollo’s Magic Rainbow 4 Zone Light Bulbs are a beautiful way to light up a room, with the ability to control a
unlimited number of lights with one easy-to-use remote. Each light bulb can display bright, color changing RGB Light
and a classic “Light Bulb” Warm White Glow. This allows users to create a beautiful spectrum of colors in each room, and
brightly light up an area with white light at the touch of a button.
The purpose of this manual is to explain the full functions of your Rainbow System, and to show you how to get the
most of out of your RGB-W Lights in any lighting environment.
Main Functions
•Color Changing Light with Instant Warm White Functionality
•Color Changing Mode with Speed Control
•4 Zone Control with On/Off Functionality
•Full Dimming Control
•Master Control for controlling all four zones at once
This Manual will review
•Installation Process
•Product Features and Primary Uses
•Detailed Functionality and Zone Synchronization
•Technical Parameters
Rainbow Remote
SKU: SA-Rainbow-Bulb-9W- Remote
RGB-W Rainbow Light Bulb
SKU: SA-Rainbow-Bulb-9W
page 1
™
PRODUCT MANUAL
Magic Rainbow 4 Zone Light Bulb System
Toll Free. 866-592-3873
www.SolidApollo.com
[email protected]
RGB-W 4 Zone Lightbulbs
Installation
Solid Apollo’s Magic Rainbow 4 Zone Light Bulb System is very simple to install. These 9W LED light bulbs can be installed
like a regular light bulb in any open-air light sockets. That means they cannot be enclosed tightly within a glass or
plastic cover, and have to have open air ventilation at all times. This section will show how to install one Rainbow
RGB-W Light Bulb, with additional bulbs being installed in the same way.
1. Installing your first Rainbow RGB-W Light bulb
Your Rainbow RGB-W Light bulb Installs like a regular light bulb, and can be
placed in a lamp or light fixture, that operates from 100V-220V, and is not
encapsulated or covered. This is to prevent any heat buildup and extend the
life of your Rainbow Bulb.
2. Place your bulb in the fixture.
Your Magic Rainbow RGB-W Light bulb comes plug-and-play ready. Simply screw into a
compatible fixture, and it will light up! You can now then assign your first bulb to a zone
on your included RF remote control.
3. Synchronizing your remote to “Zone 1”
Once your Rainbow RGB-W Light bulb is lit up, you can
synchronize your first light bulb to “Zone 1” on your remote! To
do, first ensure your remote has been powered with two new
AAA batteries (not included), and the red light in the middle of
the color wheel lights up whenever you push a button.
AAA Batteries
(Not Included)
Zone 1
Power Button
Turn your lamp/lighting fixture switch off, and then back on.
Within the first two seconds of turning it back on, press the
“Zone 1” Power button shown to the right. Your light bulb will
indicate your have synced that button to that bulb by flashing a
warm white.
page 2
Figure 1. Synchronizing
™
PRODUCT MANUAL
Magic Rainbow 4 Zone Light Bulb System
Toll Free. 866-592-3873
www.SolidApollo.com
[email protected]
RGB-W 4 Zone Lightbulbs
Installation Guide
Now that you have successfully paired one remote, you can create up to four zones, or begin learning how to control your
Rainbow RGB-W Light Bulb. This section will show you a brief introduction to the buttons on your Rainbow Remote, and
then show you detailed functionality.
Figure 2. Basic Button Functionality Rainbow Remote
page 3
™
PRODUCT MANUAL
Magic Rainbow 4 Zone Light Bulb System
Toll Free. 866-592-3873
www.SolidApollo.com
[email protected]
RGB-W 4 Zone Lightbulbs
Detailed Functionality
Power Buttons: The two power button located at the top of your remote turn on and off your lights, with the dash
being the “On” Button and the Circle being the “Off” Button. These two buttons are the Main power buttons and will
turn on and off all of your Magic Rainbow Light bulbs in unison. Hold down the “On” Button to create an instant warm
white in all of your Rainbow bulbs.
On
Off
Color Wheel: The colored circle in the middle of your controller allows you to accurately control what color is being
displayed on your RGB-W Rainbow Light Bulb. You can choose an RGB color either by touching a specific color, or by
swirling your finger around the color wheel, cycling through a variety of colors. The indication light in the middle of your
color wheel will respond whenever you press a button on your Rainbow RGB-W Controller
Color Wheel
Indication Light
Zone Control: Now that you have successfully paired one remote, you can create up to four distinct zones (you can
have multiple lightbulbs per zone). By repeating the steps on page two, but with Zones 2, 3 and 4, you can create four
distinct zones, with individual control capabilities. To control a zone, simples press that Zone’s power button, and adjust
your light however you desire.
Pre-Installed Program Control: Your Magic Rainbow RGB-W Light Bulb System has 9 Pre-Loaded Programs
which are listed in detail on page seven. You can cycle through these programs one at a time by pressing the M button,
and control the speed at any time by pressing “S-” or “S+”.
Program
Start
Decrease Program Speed
Increase Program Speed
Dimmer/Brightness Control: The dimmer in the middle of your remote has a slide dimmer that allows you
to either tap on a desire brightness (during program operation or solid color display) or slide your finger to accurately
find the right brightness for your LED lights. Simply slide a finger along the ergonomic dimmer bar, to accurately dim or
brighten your Rainbow RGB-W Light Bulb.
Dim
Brighter
page 4
™
PRODUCT MANUAL
Magic Rainbow 4 Zone Light Bulb System
Toll Free. 866-592-3873
www.SolidApollo.com
[email protected]
RGB-W 4 Zone Lightbulbs
Detailed Synchronizing
Solid Apollo’s Rainbow RGB-W 4 Zone Light Bulb System can create up to four zones with any number of light bulbs
within one of those zones. You can control individual zones, or all of your lights at once.
1. Adding RGB-W Light Bulbs to your current Zone.
1. Once you have created your first zone “Zone 1” as described on the Page 2, you can add light bulbs to that same zone.
2. Light up your second light bulb in any fixture you like, and it will turn on automatically when that fixture is turn on.
3. Get your remote ready, and turn your light fixture off, then on again. Within two seconds, tap the top of the “Zone 1”
Button.
4. Your new RGB-W light bulb will indicate that it has been synchronized to “Zone 1” by flashing a Warm White color. Now
when you are using your lights, and press zone one, you will control two bulbs.
5. Add as many Rainbow RGB-W light bulbs as you want to the first zone in this manner.
...1..2
2. Adding RGB-W Light Bulbs to a new Zone.
1. Once you are familiar with adding lights to a single zone, you can follow a very similar process to add more RGB-W
Light Bulbs to a different zone.
2. Install your RGB-W Light bulb into a new lighting fixture. Get your remote ready, and turn your light fixture off, then on
again. Within two seconds, tap the top of the “Zone 2” (if you want to assign it to zone 2) Button.
3. Your new RGB-W light bulb will indicate that it has been synchronized to “Zone 2” (or whichever zone you chose) by
flashing a Warm White color. Now when you are using your lights, and press zone two, you will control your new bulb.
4. Add as many Rainbow RGB-W light bulbs as you want to the second zone in this manner.
...1..2
page 5
™
PRODUCT MANUAL
Magic Rainbow 4 Zone Light Bulb System
Toll Free. 866-592-3873
www.SolidApollo.com
[email protected]
RGB-W 4 Zone Lightbulbs
Detailed Synchronizing Continued
3. Controlling all of your lights at once.
1. It is very simple to control all of your Rainbow RGB-W Light Bulbs at once regardless of which zone they have been
assigned to.
2. When all your light fixtures with RGB-W Light Bulbs are powered on, you can press the top power button (On) to select
all of your lights.
3. Now when you move your finger around the color wheel, start a program, or dim your lights, all of your RGB-W light
bulbs that are in the remote’s range will respond in unison. For instance, if you have two Rainbow bulbs synced, One
displaying bright purple light and one displaying green light, and you press the power button, dimming your lights will
dim both bulbs, while they retain each color. If you now press the yellow color on the color wheel, both will turn yellow,
remaining dimmed down.
4. To create an instant white on all of your light bulbs, hold down the main “Power On” Button for five seconds.
4. Resynchronizing
Your Rainbow RGB-W LED Light Bulb(s) have to be synched to a zone to respond to your remote. To change to a Remote Zone,
you can simply resynch by first unsynching it from its current zones, then following the steps on pages 2 and 3 to resynchronize
to any zone you desire.
1. Unsynchronizing: It is very simple to unsynchronize, or disassociate a RGB-W light bulb from its current zone.
2. To begin, simply turn off your light fixture where you wish to resynchronize the lightbulb. When turned back on, tap the
current zone it is associated within two seconds of turning on your light fixture. Your light bulb will now flash a warm
white color, indicating it has become unsynched.
3. Now you may resynchronize it with any zone by following the steps on pages 2 and 5. After resynchronizing you will
see a response from your bulb in a new zone once you select that specific zone, and move your finger around the color
wheel. All Magic Rainbow Light Bulbs in that zone will respond in unison.
...1..2
page 6
™
PRODUCT MANUAL
Magic Rainbow 4 Zone Light Bulb System
Toll Free. 866-592-3873
www.SolidApollo.com
[email protected]
RGB-W 4 Zone Lightbulbs
Using the Pre-Installed Programs.
Your Magic Rainbow remote comes pre-installed with 9 programs, which you can cycle
through with the “M” button in the middle of your controller. While a pre-installed program is
playing, you can press S- or S+ to change the program speed while it is playing.
Chart 1. Program List
1. RGBW Fade in Fade Out
•Fades in and out of the colors red, green blue, and white.
2. Color Flashing
•Red, green, blue, white, yellow, purple flash in succession.
3. Disco Flashing
•A variety of colors strobe and flash change.
4. Red Color Fade and Flash
•In this program, red fades in to 100% brightness then flashes
5. Green Color Fade and Flash
•In this program, Green fades in to 100% brightness then flashes
6. Blue Color Fade and Flash
•In this program, Blue fades in to 100% brightness then flashes
7. Color change and Flash
•Fades in and out of a variety of colors.
8. Fade in Fade out
•A Pulse effect with a variety of RGB colors.
9. Strobe White
•A Warm White Pulse Effect.
Remote
•RF Operation
•Takes two AAA batteries to operate (not included)
Lightbulb(s)
• 9W RGB-W Light Bulb
• 100-220V Input
• Indoor Use Only
• CE, Rohs
page 7