TUBULAR SENSORS
S15
Plastic and stainless steel tubular M18 photoelectric sensors
every environment
• Short case models for cost and space savings
• Plastic and stainless steel case with IP69K protection
• All optic functions at optimal operating distances
• Models with fixed settings or adjustment trimmer
• Cable, M12 connector and pig-tail models
APPLICATIONS
-Processing and Packaging machinery
-Assembling and Conveyor lines
(*)
IP69K
(*) Stainless steel models.
ATEX II 3DG
S15
Through beam
0…20 m
Retroreflective (on R2 reflector)
0,1…5 m
0,1…4 m
Polarized retroreflective
0,1…0,8 m
Retroreflective for transparent (on R2 reflector)
short distance 0…100 mm
medium distance 0…350 mm
Diffuse proximity
long distance 1 m
0…50 mm
Fixed focus
40…120 mm
Background suppression
Vdc
Power supply
10…30 V
Vac
Vac/dc
Output
PNP
•
NPN
•
NPN/PNP
relay
other
Connection
cable
•
connector
•
pig-tail
Approximate dimensions (mm)
•
M18x44/48
Housing material
ABS, INOX AISI 316L
Mechanical protection
IP65 - IP67 - IP69K
20
Ripp
Curre
(outp
Outp
S15 SERIES
INSTRUCTION MaNUaL
TECHNICAL DATA
Outp
Outp
Resp
Switc
Setti
TEChNICaL
TEChNICaL
DaTa
D
CONTROLS
Indic
12 ... 30 Vdc (limit values)
Power
Power
supply:
supply:
12…30
12…
V
OUTPUT
LED (S15…a0x/B0x/Cxx/T01/F0x/D50/M01)
Ripple:
Ripple:
The yellow LED permanently
ON or OFF indicates the output status.
Ripple
2 Vpp max.
Current
Current
consumption
consumption
The
yellow
LED blinking indicates the short circuit protection is turned on the
Oper
(output
(output
current
current
excluded):
excluded):
Consumption
25 mA max.
output.
Stora
Outputs:
Outputs:
PNPPNP
or NPN
or NPN
open
LED(S15…a0x/B0x/Cxx/F0x)
660 nm (mod. S15…B/D/T/M)
Insul
STaBILITYred
LED
indicate
indicate
with
Light emission
The
green
LED permanently ON indicates that the signal received has an
Insul
Output
Output
current:
current:
IR LED 880 nm (mod. S15…A/C/G)
acceptable
safety
margin
respect the output switching value and the sensor is
Output
Output
saturation
saturation
voltage:
voltage:
Oper
ready
to(mod.
function
in a stable operating condition.
Setting
mono-turn
trimmer
S15…A01/B01/Cx1/T01/F01)
and 4 turns (mod. S15…M01)
Response
Response
time:
time:
500 us
500(S15…D50)
us (S15…D50)
/ 1 ms
/
Switching
Switching
frequency:
frequency:
1 KHz
1 KHz
(D mod.)
(D mod.)
/ 500/ Hz
500(S
POWER
ON wire
LEDor(S15…G0x/M01)
white
pin 2 not connected: LIGHT mode
Settings:
Settings:
Mono-turn
Mono-turn
distance
distance
adjustment
adjustme
tr
(mod.
mode
S15…A/B/T/F)
The
greenS15…C/D/M)/DARK
LED ON indicates
that(mod.
the sensor
is operating.
Operating mode
CONTROLS
CONTROLS
Emission
Emis
SENSITIVITY
white
wire or pin 2TRIMMER-aDJ.
connected to: 0 V DARK mode, +Vcc LIGHT mode
Indicators:
Indicators:
OUTPUT
OUTPUT
LED LE
(ye
OUTPUT
OUTPUT
LEDLED
(S15…a0x/B0x/Cxx/T01/F0x/D50/M01)
(S15…a0x/B0x/Cxx/T01/F0x/D50/M01)
Mono-turn trimmer to adjust the operating distance of the sensorSTABILITY
STABI
yellow
OUTPUT
LED
The yellow
The yellow
LED LED
permanently
permanently
ON or
ON
OFF
or OFF
indicates
indicates
the output
the output
status.
status.
(S15…A01/B01/Cx1/T01/F01).
Emis
POWER
PO
Indicators
The The
yellow
yellow
LED LED
blinking
blinking
indicates
indicates
the short
the short
circuit
circuit
protection
protection
is turned
is turned
on the
on the Operating
Multi-turn
trimmer
toLED,
adjust
theLED
background
Operating
temperature:
temperature:
green
STABILITY
POWER
(mod. S15...G)suppression distance of the
output.
output.
sensor
(S15…M01)
Amb
Storage
Storage
temperature:
temperature:
Output
PNP or NPN
See
the strength:
“SETTING”
paragraph
for the functioning mode.
Vibra
Insulating
Insulating
strength:
500 Vac
500
1
V
STaBILITY
STaBILITY
LEDLED
(S15…a0x/B0x/Cxx/F0x)
(S15…a0x/B0x/Cxx/F0x)
Shoc
The The
green
green
LEDcurrent
LED
permanently
permanently
ON indicates
ON indicates
that that
the signal
the signal
received
received
has has
an an Insulating
EMISSION
POWER
REGULaTION
Insulating
resistance:
resistance:
Output
100 mA max. TRIMMER (S15…G01)
>20 M
>20
50
M
DAR
acceptable
acceptable
safety
safety
margin
margin
respect
respect
the output
the output
switching
switching
valuevalue
and the
andsensor
the sensor
is is Operating
Mono-turn
trimmer
to (typical
adjust
the power of the LED emitter and change the
Operating
distance
distance
(typical
values):
values):
A0x
V max.
readyready
to Saturation
function
to function
involtage
a stable
in a stable
operating
operating
condition.
condition.
operating distance and 2the
beam between emitter (S15…G01) and receiver
B0x
HousT
(S15…F01) 1 ms (mod. S15…A/B/C/T/M)
T01:
POWER
POWER
ON LED
ON LED
(S15…G0x/M01)
(S15…G0x/M01)
Lens
The green
The Response
green
LED LED
ON
indicates
ON indicates
that the
thatsensor
the sensor
is operating.
is operating.
time
2 ms (mod. S15…F)
WARNING: in S15…A01/B01/Cx1/T01/F01/G01
models, the trimmer
C10:rotation
C10:
0…350
0…350
mm Mech
/mm
C11
Conn
is limited to 270° by a mechanical stop. Do not apply excessive torque when
SENSITIVITY
SENSITIVITY
TRIMMER-aDJ.
TRIMMER-aDJ.
500 µs (mod. S15…D)
Mono-turn
Mono-turn
trimmer
trimmer
to adjust
to adjust
the the
operating
operating
distance
distance
of the
of the
sensor
sensor adjusting (max 40 Nmm).
500 Hz (mod. S15…A/B/C/T/M)
Weig
(S15…A01/B01/Cx1/T01/F01).
(S15…A01/B01/Cx1/T01/F01).
Emission
Emission
type:type:
RED
R(
Multi-turn
Multi-turn
trimmer
trimmer
to adjust
to adjust
the background
the background
suppression
suppression
distance
distance
of the
of the
INSTaLLaTION
INFRA
IN
Switching frequency
250 Hz (mod. S15…F)
sensor
sensor
(S15…M01)
(S15…M01)
Ambient
Ambient
light light
rejection:
rejection:
The sensor can be fixed by means of the M18x1 threaded body using CH.24
See See
the “SETTING”
the “SETTING”
paragraph
paragraph
for the
forfunctioning
the functioning
mode.
mode.
1 kHz (mod. S15…D)
Vibrations:
Vibrations:
mm
0.5 amplitude,
mm amplitud
10
nuts
(1.5Nm maximum tightening torque) or low-profile flared nut0.5provided
S15
Shock
Shock
resistance:
resistance:
11
ms
11
(30
ms
G(
EMISSION
EMISSION
POWER
POWER
REGULaTION
REGULaTION
TRIMMER
TRIMMER
(S15…G01)
(S15…G01)
specifically
supplied
M12 4-pole connector,
2 m cable
Ø 4 mm,(plastic
150 mmversion).
length Ø 4 mm cable with M12 4-pole connector
Connection
DARK/LIGHT
selection:
selection:
whitesensor
white
wire or
wire
pin
or2 pin
not 2connected:
not connected:
LIGH
Mono-turn
Mono-turn
trimmer
trimmer
to adjust
to adjust
the power
the power
of the
of LED
the LED
emitter
emitter
and and
change
change
the the DARK/LIGHT
Various
orientable
fixing
brackets
positioning
(pig-tail
vers.) are available to ease
whitewhite
wire or
wire
pinor2
operating
operating
distance
distance
and and
the beam
the beam
between
between
emitter
emitter
(S15…G01)
(S15…G01)
and and
receiver
receiver (please refer to the accessories listed in the general catalogue).
Dielectric strength
500
Vac
1distance
min., between
electronics
and the
housing
Housing
Housing
material:
material:
ABSABS
TERLUR
TER
(S15…F01)
(S15…F01)
The
operating
is measured
from
front surface of the sensor lens.
LensLens
material:
material:
Insulation resistence
>20 MΩ 500 Vdc, between electronics and housing
Mechanical
protection:
protection:
WARNING:
WARNING:
in S15…A01/B01/Cx1/T01/F01/G01
in S15…A01/B01/Cx1/T01/F01/G01
models,
models,
the trimmer
the trimmer
rotation
rotation Mechanical
Proximity
models
(S15…Cxx/D50/M01):
Mechanical
protection
IP65,
IP67, IP69K
is limited
is limited
to 270°
to 270°
by
a by
mechanical
a mechanical
stop.stop.
Do not
Do apply
not apply
excessive
excessive
torque
torque
whenwhen Connections:
M12-4
M12-4
pole pole
connecto
conn
theConnections:
object has to be
moved
closer or further
adjusting
adjusting
(max
(max
40
Nmm).
40
Nmm).
away
from
the
front
surface
the sensor lens
150 mm
150 cable
mm cable
4m

Ambient light rejection
according to ENof
60947-5-2
to improve
Weight:
Weight: detection.
40 g 40
max
g max
M12 M12
version
ver
Vibrations
0.5 In
mmcase
amplitude,
10 … 55
Hz frequency,
forobject
each axis
(EN60068-2-6)
of lateral
translation,
the
must
INSTaLLaTION
INSTaLLaTION
move
as indicated
the316L
figure.
Housing material
ABS TERLURAN,
INOXinAISI
(mod. S15-PA) - (mod. S15-NA)
DIMENSIONS
DIMENSION
The The
sensor
sensor
can be
canfixed
be fixed
by means
by means
of the
of M18x1
the M18x1
threaded
threaded
bodybody
usingusing
CH.24
CH.24
Lens
material
plastic PMMA
nuts nuts
(1.5Nm
(1.5Nm
maximum
maximum
tightening
tightening
torque)
torque)
or low-profile
or low-profile
flaredflared
nut provided
nut provided
S15-Pa/Na-5
S15-Pa/Na-5
S15-Pa-2
S15specifically
specifically
supplied
supplied
(plastic
(plastic
version).
version).
Power supply
S15
S15
SERIES
SERIES
INSTRUCTION
INSTRUCTION
MaNUaL
MaNUaL
CONNECTIONS
-25 ... 55°C
Operating temperature
Various
Various
orientable
orientable
fixingfixing
brackets
brackets
are available
are available
to ease
to ease
sensor
sensor
positioning
positioning
(please
(please
refer
refer
to the
toaccessories
the accessories
listedlisted
in theingeneral
the general
catalogue).
catalogue).
Storage
temperature
The operating
The operating
distance
distance
is measured
is measured
fromfrom
the front
the front
surface
surface
of theofsensor
the sensor
lens.lens.
Weight
Cable and Pig Tail
-25 ... 70°C
40 g S15…A00/B00/C00/C10/F00/D50
max. conn. vers., 55 g max. cable vers., 35 g max. pig-tail vers.
S15…G00
Proximity
Proximity
models
models
(S15…Cxx/D50/M01):
(S15…Cxx/D50/M01):
the object
the object
has has
to beto moved
be moved
closer
closer
or further
or further
awayaway
fromfrom
the front
the front
surface
surface
of the
of sensor
the sensor
lens lens
to improve
to improve
detection.
detection.
In case
In case
of lateral
of lateral
translation,
translation,
the object
the object
mustmust
movemove
as indicated
as indicated
in theinfigure.
the figure.
S15
CONNECTIONS
Cable
Cable
and and
Pig Tail
Pig Tail
CONNECTIONS
CONNECTIONS
Cable and Pig-tail
S15…A00/B00/C00/C10/F00/D50
S15…A00/B00/C00/C10/F00/D50
ThroughS15…G00
beam
emitter
S15…G00
M12 Connector
M12 connector
S15…a01/B01/C11/C31/T01/F01/M01
Through
beam emitter
S15…G01
S15-Pa-2/3-D50
S15-Pa-2/3-D50
S15-Pa-3
S15-
* in case of white wire or pin 2 not connected the sensor operates in LIGHT mode for the
proximity models (S15…Cxx/D50/M01) and in DARK mode for the retroreflex
(S15…A0x/B0x/T01) and receiver models (S15…F0x).
M12 M12
Connector
Connector
S15…a01/B01/C11/C31/T01/F01/M01
S15…a01/B01/C11/C31/T01/F01/M01
S15…G01
S15…G01
* in case
* in case
of white
of white
wire or
wire
pinor2 pin
not 2connected
not connected
the sensor
the sensor
operates
operates
in LIGHT
in LIGHT
modemode
for the
for the
proximity
proximity
models
models
(S15…Cxx/D50/M01)
(S15…Cxx/D50/M01)
and and
in DARK
in DARK
modemode
for the
for retroreflex
the retroreflex
(S15…A0x/B0x/T01)
(S15…A0x/B0x/T01)
and receiver
and receiver
models
models
(S15…F0x).
(S15…F0x).
21
TUBULAR SENSORS
DIMENSIONS
PLASTIC
M12 connector version
Through beam emitter - M12 connector version
Through beam emitter - cable version
22
Cable version
Background suppression - M12 connector version
Diffuse proximity - cable version
ance of the sensor
ssion distance of the
e.
G01)
mitter and change the
15…G01) and receiver
Emission type:
Ambient light rejection:
Vibrations:
Shock resistance:
DARK/LIGHT selection:
white wire or pin 2 not connected: LIGHT mode (S15…Cxx/D50/M01) / DARK mode (S15…A0x/B0x/T01/F0x);
white wire or pin 2 connected to: 0V DARK mode, +Vcc LIGHT mode
Housing material:
STAINLESSLens
STEEL
material:
Mechanical protection:
ls, the trimmer rotation
Connections:
excessive torque when
ABS TERLURAN (S15-PA) / INOX AISI 316L (S15-NA)
PMMA
IP65, IP67, IP69K
M12-4 pole connector (S15-PA/NA-5) / 2 m  4 mm cable (S15-PA-2)
150 mm cable  4 mm with M12-4 pole connector - pig-tail (S15-PA-3)
Through beam emitter - M12 connector
40 g max M12 version / 55 g max cable version / 35 g max pig-tail version
M12 connector version
Weight:
ded body using CH.24
ile flared nut provided
off and switch-on of
Mount the sensor in
Turn the trimmer in
then in clockwise u
detect the transpare
F0x/G0x: 0…20 m
C10: 0…350 mm / C11: 0…350 mm / C00: 0…100 mm / C31: 0…1000 mm
D50: 0…50 mm
M01: 40…120 mm
RED (660 nm) (S15…B0x/T01/D50/M01)
INFRARED (880 nm) (S15…A0x/Cxx/G0x)
according to EN 60947-5-2
0.5 mm amplitude, 10 … 55 Hz frequency for every axis (EN60068-2-6)
11 ms (30 G) 6 shock for every axis (EN60068-2-27)
ng.
version
DIMENSIONS
S15-Pa/Na-5
S15…F0x/G0x
Place the sensors o
In the models with
adjustment (S15…G
Moving the emitter
points of switch-off
(S15…F0x).
Mount the sensor in
LED (STABILITY) o
S15…D50
Place the sensor in
the operating distan
S15…M01
Place the object to
distance than desi
trimmer to the maxi
(OUT) is ON, then
switch OFF. Verify
sensor; tune the adj
S15-Pa-2/3
ase sensor positioning
alogue).
ace of the sensor lens.
The TEST+ and TE
verify that the syste
when the test is
activating voltage ra
The emission is swit
S15…G00
S15-Pa-2/3-D50
S15-Pa-3 (pig-tail)
Background suppression - M12 connector version
The sensors are NOT
Pig-tail version
DECLaRaTION OF CONF
We Datalogic Automation
2004/108/CE and success
WaRRaNTY
Datalogic Automation warr
Datalogic Automation will r
warranty period of 36 mon
This warranty does not co
Automation products.
S15…G01
DaTaLOGIC aUTOMaTIO
Via Lavino 265 - 40050 Mo
Tel: +39 051 6765611 - Fa
www.automation.datalogic.co
DATALOGIC AUTOMAT
DATALOGIC AUTOMAT
© 2009 –2013 Datalogic Aut
international laws. • Copyin
Datalogic Automation. Datalo
countries, including the U.S.A
tes in LIGHT mode for the
mode for the retroreflex
dimensions in mm
INDICATORS AND SETTINGS
Plastic/metal case with trimmer, M12 connector
Stability LED
Output LED
Power ON LED
G01
A01, B01, C11, C31, T01, F01, M01
Plastic, no trimmer, Cable, Pig Tail
Power ON LED
Stability LED
Output LED
Output LED
A00, B00, C10, C00, T01, D50
G00
F00
23
TUBULAR SENSORS
DETECTION DIAGRAMS
cm
R5
R2
cm
R5
R2
m
B00 - polarized retrorefleCTIVE
cm
Grey 18%
White 90%
cm
m
A00 - RETROREFLECTIVE
mm
Grey 18%
Grey 18%
C00 - short diffuse proximity
mm
White 90%
White 90%
cm
cm
D50 - fixed focus proximity
C31 - LONG diffuse proximity
C10/C11 - Medium DIFFUSE PROXIMITY
mm
R5
cm
cm
R2
m
Diff. B/W
m
Diff. W/G
F00/G01 - through beam
24
T01 - retroREFLECTIVE by trasparent
M01 - background suppression
Difference White/Grey and Black/White
MODEL selection and order information
OPTIC FUNCTION
HOUSING
CONNECTION
2 m cable
Plastic
M12 connector
Retroreflective
pig-tail
Stainless Steel
M12 connector
2 m cable
Plastic
M12 connector
Polarized Retroreflective
pig-tail
Stainless Steel
Diffuse proximity
(short distance)
M12 connector
2 m cable
Plastic
pig-tail
2 m cable
Diffuse proximity
(medium distance)
Plastic
pig-tail
Stainless Steel
Diffuse proximity
(long distance)
M12 connector
M12 connector
Plastic
M12 connector
Stainless Steel
2 m cable
Fixed focus
S15-PA-5-A01-PK
952301220
NPN
S15-PA-3-A00-NK
952301161
PNP
S15-PA-3-A00-PK
952301111
NPN
S15-NA-5-A01-NK
952301450
PNP
S15-NA-5-A01-PK
952301370
NPN
S15-PA-2-B00-NK
952301061
PNP
S15-PA-2-B00-PK
952301011
NPN
S15-PA-5-B01-NK
952301310
PNP
S15-PA-5-B01-PK
952301230
NPN
S15-PA-3-B00-NK
952301171
PNP
S15-PA-3-B00-PK
952301121
NPN
S15-NA-5-B01-NK
952301460
PNP
S15-NA-5-B01-PK
952301380
NPN
S15-PA-2-C00-NK
952301071
PNP
S15-PA-2-C00-PK
952301021
NPN
S15-PA-3-C00-NK
952301181
PNP
S15-PA-3-C00-PK
952301131
NPN
S15-PA-2-C10-NK
952301081
PNP
S15-PA-2-C10-PK
952301031
NPN
S15-PA-5-C11-NK
952301330
PNP
S15-PA-5-C11-PK
952301250
NPN
S15-PA-3-C10-NK
952301191
PNP
S15-PA-3-C10-PK
952301141
NPN
S15-NA-5-C11-NK
952301480
PNP
S15-NA-5-C11-PK
952301400
NPN
S15-PA-5-C31-NK
952301340
PNP
S15-PA-5-C31-PK
952301260
NPN
S15-NA-5-C31-NK
952301490
PNP
S15-NA-5-C31-PK
952301410
NPN
S15-PA-2-D50-NK
952301530
952301550
952301540
NPN
S15-PA-2-F00-NK
952301091
PNP
S15-PA-2-F00-PK
952301041
NPN
S15-PA-5-F01-NK
952301360
PNP
S15-PA-5-F01-PK
952301280
NPN
S15-PA-3-F00-NK
952301201
PNP
S15-PA-3-F00-PK
952301151
NPN
S15-NA-5-F01-NK
952301510
PNP
S15-NA-5-F01-PK
952301430
2 m cable
-
S15-PA-2-G00-XG
952301101
M12 connector
-
S15-PA-5-G01-XG
952301290
pig-tail
-
S15-PA-3-G00-XG
952301211
M12 connector
-
S15-NA-5-G01-XG
952301440
NPN
S15-PA-5-M01-NK
952301350
PNP
S15-PA-5-M01-PK
952301270
NPN
S15-NA-5-M01-NK
952301500
PNP
S15-NA-5-M01-PK
952301420
NPN
S15-PA-5-T01-NK
952301320
PNP
S15-PA-5-T01-PK
952301240
NPN
S15-NA-5-T01-NK
952301470
PNP
S15-NA-5-T01-PK
952301390
M12 connector
M12 connector
M12 connector
Plastic
M12 connector
Stainless Steel
952301300
PNP
S15-PA-3-D50-PK
Stainless Steel
Transparent
S15-PA-5-A01-NK
PNP
Plastic
Background suppression
952301001
NPN
952301520
pig-tail
Stainless Steel
S15-PA-2-A00-PK
S15-PA-2-D50-PK
Through beam receiver
Plastic
952301051
PNP
S15-PA-3-D50-NK
2 m cable
Through beam emitter
ORDER No.
S15-PA-2-A00-NK
PNP
pig-tail
Stainless Steel
MODEL
NPN
NPN
Plastic
Plastic
OUTPUT
25
TUBULAR SENSORS
ACCESSORIES
ST-5010
ST-5017
ST-5011
ST-5012
SWING-18
PLASTIC NUT
4
40°
M18x1
�27.5
SP-40
mm
26
MODEL
DESCRIPTION
ORDER No.
ST-5010
M18/14 mounting bracket
95ACC5230
ST-5011
M18 mounting bracket short
95ACC5240
ST-5012
M18 mounting bracket long
95ACC5250
ST-5017
M18 mounting bracket
95ACC5270
ST1218
M12/M18 mounting brackets
95ACC3340
ST1830
M18/M30 mounting brackets
95ACC3350
SP-40
mounting bracket tubular
95ACC1370
SWING-18
Adjustable support for M18 tubular sensors
895000006
PLASTIC NUT
flared mounting nut
95ACC2630
cables
TYPE
DESCRIPTION
4-pole, grey, P.V.C.
Axial M12 Connector
4-pole, P.U.R.
4-pole, grey, P.V.C.
Radial M12 Connector
4-pole, P.U.R.
Axial M12 Connector
4-pole, shielded, black, P.V.C.
Radial M12 Connector
Axial M12 Connector
Radial M12 Connector
4-pole, U.L., black, P.V.C.
4-pole, black
LENGTH
MODEL
ORDER No.
3m
CS-A1-02-G-03
95A251380
5m
CS-A1-02-G-05
95A251270
7m
CS-A1-02-G-07
95A251280
10 m
CS-A1-02-G-10
95A251390
2m
CS-A1-02-R-02
95A251540
5m
CS-A1-02-R-05
95A251560
3m
CS-A2-02-G-03
95A251360
5m
CS-A2-02-G-05
95A251240
7m
CS-A2-02-G-07
95A251245
10 m
CS-A2-02-G-10
95A251260
2m
CS-A2-02-R-02
95A251550
5m
CS-A2-02-R-05
95A251570
3m
CV-A1-22-B-03
95ACC1480
5m
CV-A1-22-B-05
95ACC1490
10 m
CV-A1-22-B-10
95ACC1500
15 m
CV-A1-22-B-15
95ACC2070
25 m
CV-A1-22-B-25
95ACC2090
3m
CV-A2-22-B-03
95ACC1540
5m
CV-A2-22-B-05
95ACC1550
10 m
CV-A2-22-B-10
95ACC1560
3m
CS-A1-02-U-03
95ASE1120
5m
CS-A1-02-U-05
95ASE1130
10 m
CS-A1-02-U-10
95ASE1140
15 m
CS-A1-02-U-15
95ASE1150
25 m
CS-A1-02-U-25
95ASE1160
Connector- not cabled
CS-A1-02-B-NC
G5085002
Connector- not cabled
CS-A2-02-B-NC
G5085003
27