USER GUIDE
TOUCHBERRY PI FAMILY
Ardbox User Guide:
1 Contents
1
TOUCHBERRY PI FAMILY GUIDE .................................................................................. 3
2
Technical Specifications .............................................................................................. 4
Page
2
2.1
General Specifications: ........................................................................................ 4
3
Power Supply............................................................................................................... 4
4
Screen configuration ................................................................................................... 5
5
I/Os Pinout .................................................................................................................. 5
6
Touchberry Pi 10.1” Dimensions: ................................................................................ 7
7
Mechanical mounting: ................................................................................................ 7
1 TOUCHBERRY PI FAMILY GUIDE
anel PC based on Raspberry PI, incorporating a 10.1” capacitive Touch Screen for
industrial
environment
Panel PC TouchBerry Pi
using Linux
10.1” Capacitive LVDS, 315n, 170ºviewing angle
TFT
Operating
Format
16:9, 1366x768
BroadCom BCM 2835
System.
SoC
(CPU+GPU+DSP+SDRAM+USBport)
CPU
ARM 1176JZF-S a 700MHz (ARM11 Family)
GPU
Memory (SDRAM)
USB Ports
Storage
Network connection
Low level devices
energy consumption
Power supply
Operative system
CPU Board
Broadcom VideoCore IV, OpenGL ES 2.0, MPEG-2 y VC-1 (with
license), 1080p30 H, 264/JMPEG-4 AVC
512MiB (shared with the GPU)
4x2.0 USB (1 is used for Touch)
SD/ MMC/ SDIO slot (1x 4Gb included)
10/100 Ethernet (RJ-45)
26x GPIO, SPI, I2C, UART
1,25A – 30W
12-24Vdc
GNU/Linux (Raspbian)
Raspberry PI B+ (included)
This Panel PC is based on GNU/Linux OS installed on his SD card. It has many interfaces built in:
Ethernet, USB, Wifi…
Page
3
Using the Ethernet port you can control
from your desk all the parameters and data
from the inputs and outputs of your system.
Additionally this panel PC has as enough
I/Os to avoid having to incorporate any PLC
on simple automation and control designs.
With TOUCHBERRY PI ou can connect all the
Industrial Shields dvices in order to obtain a
complete industrial control of all your equipment, machinery and installations.
For complex processes you can interconnect several TOUCHBERRY PI. Allowing you to
automate all the production plant and having on your hand all the real time data.
2 Technical Specifications
2.1 General Specifications:
Touchberry PI 10.1”
Item
Power supply
voltage
DC power supply
24Vdc
Power
consumption
DC power supply
30VAC max.
External
power supply
Power supply voltage
24Vdc
Power supply output
capacity
1.2mA
Shock resistance
Ambient temperature (operating)
Ambient humidity (operating)
Ambient environment (operating)
Ambient temperature (storage)
Power supply holding time
Weight
80m/s2 in the X, Y and Z direction 2 times each.
0º to 45ºC
10% to 90% (no condensation)
With no corrosive gas
-20º to 60ºC
2ms min.
1.250 gr.
3 Power Supply
Page
4
You need to connect 7 to 24 Vdc power supply.
4 Screen configuration
Light: Operation indication led
On/Off: Select the screen operation mode: (You need to choose HDMI operation mode)
Menu: choose and select the configuration mode
Down: move down on the configuration menu
Up: move up on the configuration menu
Exit: Exit the configuration menu
Page
5
5 I/Os Pinout
External D-Sub 36 female connector Pinout:
Page
6
GPIO
01
02
03
04
05
06
07
08
D-Sub 37
1
20
2
21
3
22
4
23
GPIO
09
10
11
12
13
14
15
16
D-Sub 37
5
24
6
25
7
26
8
27
GPIO
17
18
19
20
21
22
23
24
D-Sub 37
9
28
10
29
11
30
12
31
GPIO
25
26
27
28
29
30
31
32
D-Sub 37
13
32
14
33
15
34
16
GPIO
33
34
35
36
37
38
39
40
D-Sub 37
35
17
36
18
37
19
6 Touchberry Pi 10.1” Dimensions:
Page
7
7 Mechanical mounting:
About Industrial Shields:
SPAIN
Avda. Castell de Barberà 26, nave 9
08210 Barberà del Vallès (Barcelona)
Tel.+34 635693611
Mail: [email protected]