Side Cutter Kit
(Left and Right - fits all 68", 72", 80" Buckets)
These Bolt On Side Cutters (BOSC) greatly extend bucket service life and
improve penetration power into hard packed soil or stock piled materials.
BOSC's are a standard feature on Kubota's buckets and their major purpose is
to extend service life of the bucket corners and reduce downtime for costly
rebuilds.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
48" Pallet Fork
Enhance the versatility of your Kubota Compact Track Loader with a set of Pallet
Forks; giving your SVL the capabilities of a rough terrain fork lift. Pallet Forks
with standard 48" forks are rated at 5500 LB : A special feature of Kubota Pallet
Forks is the "D-ring", which is a tie down ring to secure or pull a load. Consult
your Operator Manual for load limitations and Fork ROC.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Construction 4-in-1 Bucket W/Bolt-on Cutting Edge
Loading operations are improved dramatically with this 4-N-1 Bucket simply
through the ability to "bottom dump" the bucket. Track loaders are designed to
keep loads as close to the center of gravity of the loader as possible for safety
and stability and as a side effect are often unable to dump a standard general
purpose bucket into a truck or trailer with high sides. With a 4-N-1 Bucket, if you
can reach over the side you can load it by simply using the bottom dump. There
are many other tasks you can accomplish with this versatile 4-N-1 Bucket from
dozing gravel or dirt for precise grading operations, loading, back dragging,
back filling, clamping, lifting and scraping.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
High Volume Heavy Duty Snow Bucket
This 108" High Volume Snow Bucket is specially designed for maximum
efficiency and increased capacity when loading light, loosely-packed materials
such as snow. Very popular with Landscapers for handling bark or wood chips or
light weight high volume materials. Only available with a straight bolt on edge.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Side Discharge Bucket
72" Side Discharge Bucket is available for the SVL75 and SVL90. Used for
trench bottom bedding for pipes or cable protection, foundation footing
backfill, highway drainage systems, feed lots, and many more applications.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Concrete Claw
This quality product is designed to pry, cut, tear and rip through concrete
slabs. It is made to get under concrete slabs and tear them out while
leaving them largely in tact so the claw can carry the slab away.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
72" Utility Brush Grapple
The Brush Grapple is designed to handle brush and debris and is ideal for
clearing fields and landscaping. Brush grapples have an open floor where
sand and dirt can fall through. Utility Brush Grapples are mostly used for job
site clean up.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
72" Utility Scrap Grapple
Scrap grapples have a closed floor and do have closed grapples vs. the
brushgrapples which have an open structure.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
78" Construction Brush Grapple
The Brush Grapple is designed to handle brush and debris and is ideal for
clearing fields and landscaping. Brush grapples have an open floor where
sand and dirt can fall through.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
78" Construction Scrap Grapple
Scrap grapples have a closed floor and do have closed grapples vs. the
brush grapples which have an open structure.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Auger Drive With 2" Hex Connector
Three models available from 15 to 30 GPM.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Auger Bits
Auger Bits come in a variety of sizes and models according to their
application: boring in hard packed clay or boring into ice or rock requires
different cutterbit styles and flight angle. Flight thickness will vary
significantly too. The center tube is made of thick wall high tensile steel. A
special tapered auger bit is available to dig receiving holes for planting trees
and is very popular with Landscapers. All auger bits have replaceable cutter
bits.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Rotary Cutter - "Land Shark"
Rotary Cutters are used for clearing grass and wild growth from highway
medians and utility easements as well as land clearing for housing, parks and
recreation areas.
72" rotary Cutter » standard Flow is equipped with 2-blades and available
for the SVL75 and SVL90.
78" rotary Cutter » high Flow is equipped with 3 blades and available for the
SVL90.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
84" SBB Hopper Sweeper
The container behind the brush collects all debris and can be emptied when
full. Optional water tank available for dust control for both SVL's. Quick
Change (QC) of Brush set is a standard feature. Curb brush is optional.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
84" VRS PIck-up Sweepster
Excellent for street, curb, and gutter clean-up, parks, recreation areas and
utility work site clean-up. The container behind the brush collects all debris
and can be emptied when full. Optional water tank available for dust control
for both SVL's. A Quick Change (QC) of Brush set is a standard feature.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
84" QCSS Angle Broom STD Flow, Manual Angle
Angle Brooms are ideal for haul road sweeping & clearing and moving, small
loose materials, perfect for streets, drives, and job site clean-up. Often used
for fresh snow removal. Optional water tank available for dust control for both
SVL's. A Quick Change (QC) of Brush set is a standard feature and a Hydraulic
Angle Kit is optional too.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Power Rake
Ideal for clearing and preparing soil in general construction, trench backfill
restoration, golf course construction and athletic field maintenance and for
soil preparation before laying sod. They offer the versatility to remove old
lawns and weeds, grade, level, rake, remove debris and prepare seedbeds
with one work tool. Its angling ability allows the operator to windrow
collected debris for easy pickup and removal.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Soil Preparator
76" Soil Preparator is ideal for tilling and fluffing soil while removing rocks
and debris at the same time and collecting those in the bucket behind the
rake and all debris can be dumped when full.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Auto Rake
A versatile landscaping tool, this 84" Auto Rake is ideal for pushing debris
2" and larger. No landscaper should be without one.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Tree Forks
Land Developers, Landscapers and Tree Farmers that need to move young
trees with their root ball wrapped in burlap will find the quality and versatility
of this Tree Fork to be an outstanding value.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Tree Scoop
This quality Tree Scoop is capable of transplanting trees and bushes,
removing rocks or stumps, and can even assist in setting stones in retaining
walls.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Tree Spade
Dig and transplant trees with speed and efficiency with this Tree Spade
attachment for your Kubota. This is the ideal attachment for many
applications such as nurseries, landscapers, golf courses, construction,
farming, rental yards, Christmas tree farmers, parks and recreation. Note
there are different sizes and blade styles available for different soil
conditions consult your dealer for correct application.
Available for: SVL90 + SVL90-2
Root Rake
Designed to rip up surface roots, and young wild growth, then push
everything into one big pile for disposal. Very popular with land clearing
contractors.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Post Hole Driver
A Post Driver makes setting posts quick, easy and with solid results. The
use of a Tilt Attach is recommended when used on hill sides and slopes.
Available for: SVL90 + SVL90-2
66" Tiller (STD Flow)
Tillers are designed for breaking up and pulverizing soil, mixing compost or
other materials into existing soil, and stabilizing and leveling existing terrain
in landscape finish applications. They are ideal for residential, commercial,
agricultural, building construction, lawn care and golf course maintenance
applications.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Hammer
Hydraulic Breaker. The KBX560Q hammer is available for the SVL75 and
SVL90. Note: it is required to use a door with Polycarbonate glass when
using a hammer/breaker.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Hammer Mounting Bracket
Hydraulic Breaker Bracket. A Heavy Duty mounting bracket is available for
the KBX560Q hammer/breaker for both SVL's.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Water Tank and mounting frame, with 12V pump
This 30 gallon Water Tank Kit is ideal for dust control on Brooms and
Sweepers or cooling for your Cold Planer cutter tips. The Kit includes a 12V
pump and a HD frame which mounts to existing mounting points in the roof.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Dozer Blade
Dozer Blades are designed for rough and finish grading in dirt and gravel,
and light dozing. With their angle & tilt capabilities, dozer blades are better
suited for finish grade work in golf course construction and landscaping
applications. The 84" Dozer Blade is available for the SVL75 and SVL90.
The 96" Dozer Blade is available for the SVL90.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Vibratory Roller (Padded & Smooth Drum)
The VRP84 Vibratory Roller is the ideal attachment for driveway and parking
lot preparation, soil compaction where landscapers and paving contractors
are its main users.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Tilt Attach
This Tilt Attach allows you to make a nice swale or mound with your bucket
and is ideal for golf course work. Tilt Attach's are also recommended when
trenching on slopes and hill sides, in order to maintain a vertical trench
reducing the chance of cave-ins. Post Drivers will work better with Tilt
Attach's to secure a vertical post on hill sides and slopes
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Skid Swing Hoe
Skid Swing Hoe will make a small excavator from your SVL - with all the
comfort and safety of working from inside the cab
.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Trencher
Trenchers are designed for cutting narrow straight trenches in the soil prior
to laying electrical, telephone and cable lines, or sewer, water and gas pipe.
Trenchers are used in residential, commercial, agricultural, building
construction, and golf course maintenance.
Trencher >> Standard Flow with 36" or 48" Boom and 6" Chain are
available for the SVL75 and SVL90.
Trencher >> High Flow with 36" or 48" Boom and 6" Chain are available
for the SVL90.
Since there are a wide variety of digging chain configurations available for
different soil conditions, we advise you to consult your dealer for details.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
Rock Saw
Rock Saws are designed for high performance trench cutting on a variety of
hard or compacted surfaces such as asphalt, reinforced concrete, and
rocky or frozen ground.
Available for: SVL90 + SVL90-2
Cold Planer
A Cold Planer is ideal for grinding concrete and asphalt in preparation for a
new overlay. Optional water tank with pump is recommended for cutter bit
cooling and dust control.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
84" Snow Blower
84" Snow Blower (STD Flow)
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
84" Snow Blower (High Flow)
Available for: SVL90 + SVL90-2
High Volume Heavy Duty Snow Bucket
This 108" High Volume Snow Bucket is specially designed for maximum
efficiency and increased capacity when loading light, loosely-packed
materials such as snow. Very popular with Landscapers for handling bark or
woodchips or light weight high volume materials. Only available with a
straight bolt on edge.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2
96" Snow Blade
This 96" Snow Blade is ideal for cleaning parking lots and drive-ways and is
equipped with a trip system to avoid blade damage when hitting a curb or
manhole cover. Available for the SVL75 and SVL90.
Available for: SVL75 + SVL75-2/SVL90 + SVL90-2