Buy Octagon Mat
With Frame Dimensions
Need help?
1-800-586-7456
Regardless of hardware type,
measure to & from where
spring touches frame.
Frame Length
Select corner configuration:
Normal (as shown)
1
2
Frame Width
Normal with diagonal
Diagonal
3
Count spring attachments along one side.
If present, do NOT count the diagonal corner springs.
1. Length
_____________
2. Width
_____________
3. Spring count along one side _____________
4. Find correct order form at http://www.trampoline-1.com/octagonal-mat-order.php
We prefer to receive mat orders by mat measurement whenever the old mat meets these guidelines:
1. When collecting # 1 and # 2 measurements (shown above) be sure to follow the ‘grain’ of your fabric. To find the grain, look closely and notice the
yarn runs in two directions from 12 to 6-o’clock and also from 9 to 3-o’clock. Measure in both directions following the path of the yarn.
2. If your old trampoline mat has a hole bigger than 1-inch directly in line with the fabric’s grain, please order using frame & spring measurements on
order form found at http://www.trampoline-1.com/octagonal-mat-order.php Order using this form if mat diameter measurement cab be collected along
the fabric’s grain without spanning a hole greater than 1-inch.
3. Measure with the grain even if the metal hardware along the edge of your mat is missing. If metal hardware is missing, add the appropriate distance
to your measurement to account for the missing hardware
4. Mat can be measured while installed or while laying flat. If measured off the trampoline, gently pull the mat flat while measuring.