The problem solver.
APPROVED PRODUCT
UTC - UNIVERSAL TRANSITION COUPLING
The UTC® is a unique range of mechanical compression fittings that provides the ultimate in pipe connection flexibility.
Designed especially for connecting pipes that are made from a variety of different materials, such as polyethylene,
galvanised iron, PVC, copper, ABS, lead and stainless steel. The Philmac UTC® is constructed with a wide outside diameter
tolerance, and is designed to accommodate a range of different diameters on most pipe materials within one fitting.
In addition to winning international design awards the UTC® has been embraced by water utilities right around the world.
Installation Instructions
1. Ensure fitting is correct type and size for pipe.
2. Cut pipes to required length, using the STOP
markings located on the outside of the centre
body as a guide.
3. Ensure end of connecting pipe is undamaged
and clean. No lubrication of the pipe is
necessary.
4. The UTC does not require removal of the nut
prior to installation.
6. Insert the pipe into the body to the depth
indicated by the STOP markings on the outside
of the fitting.
7. Tighten nut firmly using a wrench, or better
still, use our Universal Y Spanner.
NB Where pipes are used for electrical earthing
ensure continuity is maintained. If in doubt
please consult your electrician or electrical
engineer.
5. Ensure the nut is at least 3 threads back from
the flange of the body for smaller pipe,
allowing 4 - 5 threads for the larger pipe.
www.southcoastsales.com
No.1 Doughcloyne Industrial Estate, Wilton, Cork
021 434 6143
[email protected]
South Coast Sales
JUST ADD ANY PIPE!
The UTC allows pipe of ANY material (plastic ,metal, steel etc.) to connect to NG, HG or Metric Pipes
1032 15-21 mm x 1/2” / 20 mm
1054 27-34 mm x 1” / 32 mm
1042 21-27 mm x 1/2” / 20 mm
1064 39-43 mm x 1” / 32 mm
1033 15-21 mm x 3/4” / 25 mm
1043 21-27 mm x 3/4” / 25 mm
1052 27-34 mm x 1/2” / 20 mm
1053 27-34 mm x 3/4” / 25 mm
UNIVERSAL TRANSITION
ELBOW UTC x POL
1097 59-61 mm x 2” / 63 mm
1232 15-21 mm x 3/4” BSP
1243 21-27 mm x 1“ BSP
1252 27-34 mm x 3/4” BSP
1253 27-34 mm x 1” BSP
1653 27-34 mm x 1” / 32 mm
1244 21-27 mm x 1 1/4” BSP
1231 15-21 mm x 1/2” BSP
1254 27-34 mm x 1 1/4” BSP
1233 15-21 mm x 1” BSP
1255 27-34 mm x 1 1/2” BSP
1133 15-21 mm x 15-21 mm
1166 39-43 mm x 39-43 mm
1155 27-34 mm x 27-34 mm
1199 59-61 mm x 59-61 mm
1144 21-27 mm x 21-27 mm
1188 47-49 mm x 47-49 mm
1177 34-39 mm x 34-39 mm
UNIVERSAL TRANSITION
REDUCED REPAIR JOINT
1087 47-49 mm x 2” / 63 mm
1544 21-27 mm x 1” / 32 mm
1242 21-27 mm x 3/4” BSP
UNIVERSAL TRANSITION
DOUBLE ENDED REPAIR JOINT
1086 47-49 mm x 1 1/2” / 50mm
1533 15-21 mm x 3/4” / 25 mm
1543 21-27 mm x 3/4” / 25 mm
UNIVERSAL TRANSITION M.I.
END CONNECTOR
UTC x M.I. BSP
1074 34-39 mm x 1” / 32 mm
1143 21-27 mm x 15-21 mm
1153 27-34 mm x 15-21 mm
1154 27-34 mm x 21-27 mm
1165 39-43 mm x 27-34 mm
SCS-LIB041
UNIVERSAL TRANSITION
COUPLING UTC x POL
GUIDE ONLY: ACTUAL SIZE DEPENDANT ON PIPE CONDITION
UTC RANGE
Normal Gauge
15 - 21
21 - 27
27 - 34
34 - 39
1/2”
3/4”
1”
1 1/4”
1/2”
3/4”
1”
Heavy Gauge IRS
39 - 43
47 - 49
59 - 61
Copper
15 mm
22 mm
28 mm
35 mm
42 mm
Galvanised Iron
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
Stainless Steel
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
Metric ABS / PVC
16 mm & 20 mm
25 mm
32 mm
3/8”
1/2”
3/4”
1”
1 1/4”
1 1/2”
2”
3/8”
1/2”
3/4”
1 1/4”
1”
1 1/2”
5lb / 20mm
6lb / 21.6mm
9lb / 30.6mm
7lb / 37.6mm
16lb / 41mm
12lb / 48mm
Imperial ABS / PVC
7lb / 23.2mm
Lead
9lb / 23.2mm
1/2”
3/4”
2lb / 16mm
4lb / 25.2mm
6lb / 31mm
5lb / 26.4mm
7lb / 31.6mm
4lb / 19.2mm
1”
40 mm