Plug and play
Book corners for M290 - M520 / 4GS-35
Book corners are the ideal component to use for
variable angular adjustment between 0° to 180°
degrees. The corners are designed to use
either female receivers or half connectors
bolted through the rigid aluminium hinge frame.
qbb 1
Bookcorner for M290 series
Note: Book corners are not structural components and must be supported on both sides of
the frame to ensure safe operation.
If needed to lock the bookcorners angle in one
position contact Milos Design Center to set
exact dimensions.
qbk 1
Bookcorner for M390 series
Can be configured for use with M290 Quatro and Trio (apex up/down) formats.
Can be configured for use with M390 Quatro and Trio (apex up/down) formats.
qbo 1
FBP 1
Bookcorner for M400 series
Can be configured for use with M400 Quatro and Rect series.
58
Bookcorner for M520 Fold series
4GS-35-BC-V
4GS-35-BC-h
Bookcorner for 4GS-35 vertical direction
ø 35 mm
0'-1 3/8"
60 mm
0'-2 3/8"
ø 45 mm
0'-1 3/4"
20 mm
0'-1 13/16"
Bookcorner for 4GS-35 horizontal direction
73 mm
0'-2 7/8"
ø 45 mm
0'-1 3/4"
20,5 mm
0'-13/16"
73mm
0'-2 7/8"
20,5 mm
0'-13/16"
con 70
For bookcorner QBB 1, QBK1
con 71
For bookcorner QBO1
con 72
For bookcorner FBP1
Series
Supplied with washer and
M12x75 bolt
Series
Supplied with washer and
M12x75 bolt
Series
Supplied with washer and
M16x90 bolt
M290
M390
M400
M520
M520 Fold
*specify the connectibility version (B, U, F) when ordering
ø 48 mm
0'-1 7/8"
100 mm
0'-3 15/16"
100 mm
0'-3 15/16"
ø 48 mm
0'-1 7/8"
75 mm
0'-2 15/16"
75 mm
0'-2 15/16"
con 164
For bookcorner
4GS-35-BC-V
Series
Supplied with washer and
M12x80 bolt
4GS-35
con 165
For bookcorner
4GS-35-BC-H
Series
Supplied with washer and
M12x80 bolt
4GS-35
CONNECTION MATERIAL - FOR CONNECTOR USE
Cube type
CON
code
CON 70B
B/M12 (al)
M12x75 HEX
d13/37 large
20mm/0.79"
M290
CON 70F
F/M12 (al)
M12x75 HEX
d13/37 large
20mm/0.79"
M390
Male half connector
Bolt
Washer
Shoulder length
CON 70U
U/M12 (al)
M12x75 HEX
d13/37 large
20mm/0.79"
CON 70B
B/M12 (al)
M12x75 HEX
d13/37 large
20mm/0.79"
CON 70F
F/M12 (al)
M12x75 HEX
d13/37 large
20mm/0.79"
CON 70U
U/M12 (al)
M12x75 HEX
d13/37 large
20mm/0.79"
M400
CON 71
O/M12 (al)
M12x75 HEX
d13/37 large
20mm/0.79"
M520
CON 72
O/M16 (al)
M16x90 HEX
d17/50 large
20mm/0.79"
M520 Fold
4GS-35
CON 72
O/M16 (al)
M16x90 HEX
d17/50 large
20mm/0.79"
CON 164
EYE GS-75, M12
M12x80 HEX
d13/37 large
75mm/2.95"
CON 165
FORK GS-75, M12
M12x80 HEX
d13/37 large
75mm/2.95"
59