MM1000 Mount - Accent Alarms

PRODUCT SPECIFICATION
monitor solutions
MM1000 Mount
WALL, MONITOR
Product Features
• Low Cost
• Supports up to 40 lb (18 kg)
• Designed for 9-Inch (22.86 cm) and 12-Inch (30.48 cm) CCTV
Monitors
MM1000
• Universal Monitor or Wall Mounting
• Attractive, Unobtrusive Design
• Lightweight for Fast, Easy Installation
10.50
(26.67)
The MM1000 is a universal monitor mount constructed from
aluminum and capable of supporting a 9-inch (22.86 cm) or 12-inch
(30.48 cm) monitor weighing up to 40 pounds (18 kg). The MM1000
mounts to a wall or vertical surface.
The universal mounting head allows the MM1000 to adapt to most
9-inch (22.86 cm) or 12-inch (30.48 cm) CCTV monitors. Support pan
extension brackets are provided to accommodate monitors with
slightly different hole patterns or rubber feet. Horizontal and vertical
adjustments allow you to position the monitor.
In addition, the MM1000 can be adapted for mounting on a pole
when used with the PA101 pole mount. A 3-inch (7.62 cm) to 8-inch
(20.32 cm) diameter pole is required.
C242 / REVISED 6-09-08
0.28 (0.71) X 1.00 (2.54)
SLOT THRU TYP
11.00
(27.94)
2.75
(6.98)
Ø0.343 (0.87)
1X
Ø0.28 (0.71)
3X
15.22
38.55
1.50 (3.81)
2.86
(7.26)
3.48
(8.83)
3.00
(7.62)
4.73
(12.01)
9.72
(24.68)
0.63 (1.60)
1.25 (3.17)
MM1000
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.
International Standards
Organization Registered Firm;
ISO 9001 Quality System
TECHNICAL SPECIFICATIONS
MODEL
MM1000
Wall mount for 9-inch (22.86 cm) and 12-inch
(30.48 cm) CCTV monitors
MECHANICAL
Pan Adjustment
Tilt Adjustment
Monitor Mounting
Unlimited 360°
+10°, -90°
Multiple slotted holes in monitor support pan
(4 mounting screws required, not supplied)
3/8-16 Allen bolts
Secure to wall or horizontal surface as noted:
3, 1/4-20 fasteners or one 1/4-inch diameter
and one 5/16-inch diameter fastener for
center mount holes in applications where wall
studs are encountered
Locking Method
Mounting Method
MM1000
GENERAL
Construction
Finish
Maximum Load
Unit Weight
MM1000
PA101
Shipping Weight
MM1000
PA101
Aluminum
Gray polyester powder coat
40 lb (18 kg)
2.76 lb (1.25 kg)
0.88 lb (0.40 kg)
4 lb (1.81 kg)
2 lb (0.90 kg)
CERTIFICATIONS
• UL Listed
OPTIONAL MOUNT ADAPTERS
PA101
Pole mount adapter for MM1000.
Fits poles with 3-inch (7.62 cm) to 8-inch
(20.32 cm) diameters. Stainless steel
mounting straps supplied
PA101
Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX: (800) 289-9150
International Tel: +1 (559) 292-1981 • FAX: +1 (559) 348-1120
www.pelco.com
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2008, Pelco, Inc. All rights reserved.