GUNNAR – Quick Reference Guide
HOW TO EXPAND THE OUTLINE OF
AN OBJECT IN COREL DRAW,
-
TO GO AROUND AN OPENING IN GUNNAR SPT32.
1. Starting with the basic shape which you have already created and “cleaned up”.
2. On the vertical toolbar on the left hand side, select the outline tool
menu, and select the “hairline outline” option:
How to expand the outline of an object in Corel Draw – by Jared Davis CPF, GCF
and expand the
GUNNAR – Quick Reference Guide
3. On the vertical toolbar on the left hand side, find the fill tool
and select “no fill” option to remove the fill:
and expand the menu,
4. On the vertical toolbar on the left hand side, find the interactive menu
the menu, and select “interactive contour tool”:
and expand
5. On the toolbar at the top of the screen, Adjust the contour to outside option and the
contour offset value, and apply it to the shape.
How to expand the outline of an object in Corel Draw – by Jared Davis CPF, GCF
GUNNAR – Quick Reference Guide
6. On the vertical toolbar on the left hand side, select the object with the pick tool
and
then go to the Arrange on the Menu Bar at the top of the screen, and select “Break
Contour Group Apart” (CTRL K).
7. Then you can select and delete the smaller opening, keeping the larger one.
8. Enlarge the figure as big as possible (min 4 times more than original size).
9. Select all and copy to clipboard (Ctrl C) which you can now & paste into SPT32.
How to expand the outline of an object in Corel Draw – by Jared Davis CPF, GCF