INTERNAL
DOORSETS
www.jeld-wen.co.uk
TAKING OUR
RESPONSIBILITIES
SERIOUSLY
JELD-WEN aspires to be the industry leader in environmentally
responsible practices and products. We have committed
ourselves to more sustainable business practices and have
adopted the ISO 14001 Environmental Management Standard
to maintain and ensure continual improvement of our
environmental performance.
It is our policy to operate our business in the following manner:
To comply with all UK Environmental legislation and prevent pollution.
All emissions from our operations will be maintained within the
standards required by local and national regulations.
To source all our materials from legal sources. In addition, we are
committed to achieving the position where all timber purchases
are from certificated legal and sustainable sources. We operate
independently certificated and audited Chain of Custody
procedures in each of our factories providing
Chain of Custody product certification where required by our
customers. We will use materials from CPET recognised certification
schemes where suitable materials are available outside Chain of
Custody certification.
We operate a transport policy with the objective of reducing carbon
emissions through the use of the following standardising on use
of diesel powered vehicles; standardising on vehicles equipped
with satellite navigation systems, to improve vehicle use efficiency
and encourage the use of shared vehicles and rail travel where
opportunities permit within the needs of the business.
We work with suppliers to promote responsible ethical conduct of
their businesses. Additionally, we support local charitable and
community cause particularly where common shared interests exist.
We have a programme of employee awareness, training and
education across our business to ensure this policy is communicated
and understood by our employees. We also publish this policy through
our website to ensure it is publicly available and constantly up to date.
Forest Stewardship
Council® (FSC)
certification ensures
responsible sourcing of
timber. This is available
on request and must be
agreed prior to order.
Programme for the
Endorsement of Forest
Certification (PEFC)
certification ensures
responsible sourcing of
timber. This is available
on request and must be
agreed prior to order.
Linea
Panel
Newark
Glazed
CONTENTS
Readyfit™ Residential Doorsets4
Standard Specification
6
Fire Doorset Specification
7
Ordering Readyfit™8
Door Styles 10
Installation Guide
14
Additional Doorset Applications
16
Securefit Flat & Apartment Entrance Doorsets18
™
Doorset Specification
20
Ordering Securefit™21
Door Styles
22
Important Information
23
3
Real Wood
Veneer, Walnut
4
www.jeld-wen.co.uk
READYFIT™
RESIDENTIAL DOORSETS
The Readyfit™ doorset is designed specifically for internal residential applications, and is a cost
effective solution for fitting a door and frame as quickly and easily as possible. Readyfit™ doorsets
are available as single doorsets or as doorset pairs, with a wide variety of door styles to choose from.
Supplied as a pre-hung set with architraves, hinges,
latch or lock, door linings and door stops, the Readyfit™
doorset is a smart solution to save time, reduce cost
and ensure quality.
Readyfit™ internal fire doorsets are also available
with FD30 or FD60 fire rating.
• Supplied with MDF foil wrapped linings. Readyfit™
single doorsets are supplied assembled and handed
as per your order
•A
rchitraves and door stops are fully machined and
packed with the doorset. Fixing brackets are pre-fitted
to the side of the frames for ease of installation
• T he door stop groove in the lining facilitates the
concealed screw-fixing of the lining to the wall
MDF lining
• S olid reliable fixing system through the lining into
the core of the wall
•A
rchitrave tongue is self-adjusting to accommodate
minor inaccuracies in partition widths
• Interlocking mechanical joints for a tight accurate
fit of the architrave
•M
DF moisture resistant foil wrapped linings, stops
and architraves
Fire doorsets: MDF lining or hardwood door frames
• F ire doorsets are available as FD30, 30 minute fire rating
using MDF linings. FD60, 60 minute fire rating doorsets
are available in hardwood door frames only
•A
vailable with standard intumescent strips only, or
both intumescent and smoke seals fitted to the head
and jambs of the lining or door frame. Supplied in
either white or brown
Doorset pairs
Readyfit™ doorsets are also available to order as pairs.
We supply these in knock down form and handed
as per your order.
Cambridge,
Doorset Pairs
READYFIT ™ • RESIDENTIAL DOORSETS
5
STANDARD SPECIFICATION
MDF LINING
8
2
5
3
1
6
4
7
Back of doorset as supplied
9
1) Hinges
Doorsets are supplied with three 100mm hinges in
bright nickel effect or satin finishes.
2) Architrave
Available in the following styles:
Ogee / Ovolo / Torus / Twice Rounded.
3) Latch or Bath Lock
65mm tubular latch or 65mm bath lock both available in bright polished steel.
4) Lining
Linings are 25mm thick plus 12mm for the stop, giving a
total thickness of 37mm. Linings are available to suit all
door thicknesses.
Size options are: 77mm / 90mm / 95mm / 100mm
115mm / 120mm / 125mm / 130mm / 140mm / 150mm
5) Door stops
Supplied loose for ease of installation, stops are machined
to complement our range of 35, 40 and 44mm doors.
Door stops are supplied in two sizes 27mm or 71mm
according to the lining depth.
6) Fixing brackets
These brackets are supplied reversed for transport and
can be easily adjusted when fitting the doorset.
7) Strap banded & braced
For ease of distribution and handling during fitting.
8) Floor covering clearance
Supplied with a 15mm clearance beneath the door.
9) Transporting bracket
Supplied fitted to keep the door closed during transport
and the fitting process.
Note: Doorset pairs are supplied unassembled.
6
www.jeld-wen.co.uk
FIRE DOORSET SPECIFICATION
MDF LINING
1
1) Lining and intumescent strip
Readyfit™ fire doorsets are supplied with an FD30 fire
rating as standard.
These doorsets are supplied with the same options as
the standard MDF specification, with the addition of
10mm x 4mm intumescent strips fitted to the jambs
and head to achieve 30 minute fire protection when
fitted with an appropriate JELD-WEN fire door.
FD60 fire doorsets are also available on request, they are
supplied with a hardwood unfinished frame with two
15mm x 4mm intumescent strips fitted to the jambs
and head.
Installation – ReadyfitTM FD30
To add extra support due to the weight of the FD30 fire
door, we recommend that one of the frame side hinge
screws on the top two hinges is replaced with a 50mm
screw (not supplied). This should be driven through the
frame into the supporting studwork should it be felt
necessary on site.
When fitting a fire doorset it is essential that additional
fixing takes place through the door stop groove in
the jambs. If there are any spaces (must be no more
than 3mm) between the frame and the wall then an
appropriate fire-resisting material must be used to fill
those gaps.
READYFIT ™ • STANDARD / FIRE DOORSET SPECIFICATION
7
ORDERING READYFIT™
When ordering your Readyfit™ doorsets there are several key factors you
will need to take into consideration:
Door Size
Imperial / Metric
App Doc M
STRUCTURAL & CLEAR OPENING SIZES
Structural Opening Size*
MDF
Non FD &FD30
Hardwood
FD60
Clear Opening Width
35/40mm
Thick
FD30
44mm Thick
FD60
54mm Thick
Single Doorsets
1981x457mm (6'6" x 1'6")
2036x522mm
412mm
403mm
1981x533mm (6'6" x 1'9")
2036x598mm
488mm
479mm
1981x610mm (6'6" x 2'0")
2036x675mm
565mm
556mm
1981x686mm (6'6" x 2'3")
2036x751mm
641mm
632mm
1981x762mm (6'6" x 2'6")
2036x827mm
717mm
708mm
1981x838mm (6'6" x 2'9")
4
2036x903mm
2051x938mm
793mm
784mm
774mm
1981x864mm (6'6" x 2'10")
4
2036x929mm
2051x964mm
819mm
810mm
800mm
1981x914mm (6'6" x 3'0")
4
2036x979mm
2051x1014mm
869mm
860mm
850mm
Metric 2040x526mm
2095x591mm
476mm
472mm
Metric 2040x626mm
2095x691mm
576mm
572mm
Metric 2040x726mm
2095x791mm
676mm
672mm
Metric 2040x826mm
2095x891mm
776mm
772mm
876mm
872mm
Metric 2040x926mm
2095x991mm
2110x1026mm
1981x1066mm (6’6” x 3’6”)
2036x1131mm
2051x1166mm
1981x1168mm (6’6” x 3’10”)
2036x1233mm
2051x1268mm
1981x1220mm (6’6” x 4’0”)
2036x1285mm
2051x1320mm
1981x1372mm (6’6” x 4’6”)
2036x1437mm
2051x1472mm
1981x1512mm (6’6” x 5’0”)
2036x1577mm
2051x1612mm
4
862mm
Doorset Pairs
*Note: Structural opening sizes include a 10mm width and 5mm height fitting tolerance.
App Doc M = BUILDING REGULATIONS
APPROVED DOCUMENT M
MOBILITY PART M
HOW TO CALCULATE THE CLEAR OPENING SIZE
Clear opening dimensions
are determined by a number
of components including
13mm stop + 3mm edge
gap either side.
Clear
opening
width
Single doorsets
DOOR WIDTH + 6mm (edge gap either side) Minus 51mm (for 35mm thick doors) = CLEAR OPENING SIZE
56mm (for 40mm thick door)
60mm (for 44mm thick doors)
70mm (for 54mm thick doors)
8
www.jeld-wen.co.uk
POINTS TO CONSIDER BEFORE ORDERING YOUR DOORSETS
Choosing Your Style of Door
White Oak
pg 10
Moulded11
Real Wood Veneer
12
Paint Grade
12
Glazed Fire Doors
13
Door Handing
Lining Width
Supplied assembled and handed as per your order.
Handing is determined when facing the door,
with the hinge knuckle visible to the left or right
side as the door opens towards you. Please state
whether you require right or left hand when ordering.
Size options available:
77mm / 90mm / 95mm /
100mm / 115mm / 120mm /
125mm / 130mm / 140mm /
150mm
Hinge Options
Doorsets are supplied with three 100mm hinges
and are available in a choice of two finishes.
Left hand hung
Right hand hung
Bright nickel
Satin
Architrave Options
MDF architrave is supplied foilwrapped in white and is available
in a choice of four styles. Architrave
is pre-cut to length with a Hoffmann
joint pre-machined when ordered
with MDF linings, not available
with timber linings.
Ogee
(69 & 50mm)
Torus
(69 & 59mm)
Twice Rounded
(69 & 45mm)
Latch
Bath Lock
A 65mm tubular bolt
through latch is supplied
as standard, available in
polished steel.
A 65mm bath lock option with
thumbturn is available. This is
supplied with a fully adjustable
keep to prevent the door from
rattling once fitted on-site
Ovolo
(69mm)
Note: Handles are not supplied with Readyfit™ doorsets
ORDERING READYFIT ™ • READYFIT ™
9
DOOR STYLES
The Readyfit™ doorset range is available in traditional and contemporary door designs in a wide
variety of styles, materials and types of construction. Choose from our most popular moulded,
white oak and real wood veneer interior doors in both panel and glazed designs.
WHITE OAK
OREGON
6 Panel
Flush Bead
OREGON
4 Panel
Flush Bead
OREGON
4 Panel
Raised Bead
COTTAGE
Horizontal
Clear
SHAKER
1 Panel
SHAKER
SHAKER
Recessed
4 Panel
Cottage Panel
CUBE
CUBE
3 Light
Etch
WORCESTER
Icon Guide
Available as an FD30 Fire Doorset
Smooth finish
Woodgrain finish
10
www.jeld-wen.co.uk
OREGON
2 Light Clear
Flush Bead
WORCESTER
3 Light Clear
OREGON
2 Light Clear
Raised Bead
OREGON
OREGON
OREGON
10 Light Clear 15 Light Clear Cottage
Flush Bead
Flush Bead
OREGON
Cottage Etch
COTTAGE
Horizontal
SHAKER
2 Panel
SHAKER
1 Light Clear/
Obscure
ASTON
3 Panel
ASTON
3 Light Clear/
Obscure
SHAKER
4 Light
Clear
SHAKER
2 Light
Clear
MOULDED PANEL
NEW
BOSTONIAN OAKFIELD
ARLINGTON ATHERTON
CAMDEN
CAMBRIDGE ROCKPORT® LINEA
CUBE
NEWARK
NEWBRIDGE
MOULDED GLAZED
NEW
Clear
Etch
10 Light Etch
6 Light Etch
NEW
NEW
CAMDEN
6 Light Etch
NEW
CAMDEN
10 Light Etch
CAMBRIDGE
6 Light Etch
Improved glazing
specification
All our moulded
glazed doors are now
supplied with a new
contemporary slim
glazing bead profile.
LINEA
1 Light
Clear/Etch
LINEA
5 Light
Clear/Etch
ROCKPORT®
Leaded
NEWARK
Vertical Etch
NEWBRIDGE
Vertical Etch
NEW
SLIM-LINE
BEAD
PROFILE
CUBE
5 Light
Clear
CORE TYPES:
Standard: Our standard core is hollow which has one lock
block to one side of the door for the lock or latch fitting.
Approximate doorset weight of 18kg.
Fire Doors: FD30/FD60 fire doors achieving a 30 and 60
minute fire protection when fitted in a JELD-WEN Readyfit
fire doorset. Approximate doorset weight of 39kg.
Middleweight: A semi solid core gives a
sturdier, heavier feel, and provides a far
greater fixing area for ironmongery.
Approximate doorset weight of 21kg.
Heavyweight: Made using solid core
that gives a door a substantial feel and
help reduce sound transmission from
one room to another. You can also
fix ironmongery anywhere across
the surface of the door.
Approximate doorset
weight of 34kg.
Standard
Middleweight
Heavyweight
FD30 44mm
FD60 54mm
READYFIT ™ • DOOR STYLES
11
REAL WOOD VENEER
SELECTION RANGE
NEW
NEW
NEW
NEW
TEXTURED
White Oak
TEXTURED
White Oak
3 Light Clear
TEXTURED
Grey Oak
TEXTURED
Grey Oak
3 Light Clear
FUSION
White Oak
NEW
NEW
NEW
NEW
NEW
FUSION
Olive Ash
FUSION
Olive Ash
3 Light Clear
FUSION
Grey
FUSION
Grey
3 Light Clear
FUSION
Grey
1 Light Clear
NEW
NEW
NEW
NEW
NEW
INLAY
Silver Ash
4 Light Clear
INLAY
Brown Ash
INLAY
Brown Ash
4 Light Clear
INLAY
White Oak
Twin
INLAY
White Oak
Twin 4 Light
Clear
FUSION
White Oak
3 Light Clear
INLAY
White Oak
SAPELE
WHITE OAK
Icon Guide
MOBILITY PART M
Doors 838mm wide and above
comply with Approved
Document M
Available as an FD30 Fire Doorset
12
INLAY
White Oak
4 Light Clear
FUSION
Walnut
FUSION
Walnut
3 Light Clear
FUSION
Walnut
1 Light Clear
NEW
NEW
NEW
INLAY
Walnut
4 Panel
INLAY
Walnut
4 Light Clear
INLAY
Silver Ash
PAINT GRADE
STANDARD RANGE
KOTO
FUSION
White Oak
1 Light Clear
www.jeld-wen.co.uk
ASH
BEECH
WALNUT
PAINT
GRADE
PAINT GRADE
PREMIUM
REAL WOOD VENEER, GLAZED FD30 FIRE DOORS
MOBILITY PART M
GC01
GC05
MOBILITY PART M
MOBILITY PART M
GC08
GC09
NEW
GC13
GC14
MOBILITY PART M
MOBILITY PART M
GC07
GC06
NEW
GC10
GC11
GC12
All available in Ash, White Oak, Beech, Sapele, Koto & Walnut.
PAINT GRADE, GLAZED FD30 FIRE DOORS
MOBILITY PART M
GW01
MOBILITY PART M
MOBILITY PART M
GW05
GW10
GW06
App Doc M
Aperture
GC
GC01 / GW01
GW
MOBILITY PART M
MOBILITY PART M
GW11
MOBILITY PART M
GW12
Actual visible glass
area (mm) WxH
Top margin (mm)
Side margin (mm)
Distance between
beads (mm)
4
425x425
141.5
GC05 / GW05
4
4
118x728, 118x428
141.5
141.5
196
GC06 / GW06
4
4
118x1378
141.5
141.5
-
GC07
4
58x1668
141.5
Central
83
193x193
141.5
Central
104
425x1668
141.5
Central
-
4
478x883
141.5
Central
-
4
118x1118
401.5
141.5
-
4
118x883
141.5
141.5
-
GC13
376x238
196.5
Central
113
GC14
238x376
141.5
Central
113
GC08
GC09
4
GC10 / GW10
GC11 / GW11
GC12 / GW12
4
-
GC = Clear Glazed
GW = Clear Georgian Wired Glazed
READYFIT ™ • DOOR STYLES / ADDITIONAL DOORSET APPLICATIONS
13
INSTALLATION GUIDE
14
Doorsets are supplied plastic banded with
a timber packing bar for distribution and
ease of handling during fitting.
STEP 1: Unscrew all fixing brackets,
reverse them and re-fit ready to offer the
doorset to the opening.
STEP 3: Screw the fixing brackets to the
wall. Only screw them hand tight at this
stage until step 4 is complete.
STEP 4: Using a spirit level, check the doorset is positioned square in the opening at all
edges, pack where necessary.
STEP 5: Fully tighten the screws in the
fixing brackets.
STEP 6: Now the doorset is in place,
remove the plastic banding and the timber
packing bar.
STEP 8: Using a spirit level, make
sure the door and the frame is plumb
and square.
STEP 9: Using the timber packing bar removed in step 6, position onto the frame and
slide down from top to bottom checking for tightness or excessive gaps.
www.jeld-wen.co.uk
STEP 2: Offer up the doorset into the
opening, use packers on the edges of
the doorset if required. To increase floor
covering clearance, packers may be
positioned under each jamb.
STEP 7: Unscrew and remove the metal
transport bracket at the top of the doorset.
STEP 10: If you have
STEP 11: Test the door closes into the
STEP 12: Using the fixing guide
excessive gaps you
must add packers between the frame and
the opening equally at either side.
frame correctly, ensuring that the door
does not bind or catch in the frame.
illustration, measure from the top and
bottom, screw through the lining into the
wall where machined for the door stops.
STEP 13: Removing
STEP 14: Fix the two vertical door stops
STEP 15: Take two pieces of the
the top stop and pins, use
packers to adjust between the frame and
the opening and fix in the centre. Using
grab adhesive or pins refit the top stop.
in position, using an appropriate grab
adhesive and pins.
architrave, (one edge and the top piece)
and offer them together.
600mm
100
mm
FIXING GUIDE
STEP 17: Apply an appropriate grab
provided assemble both pieces of the
architrave together.
adhesive to the groove in the lining that
the architrave will be positioned in.
STEP 18: Press the two pieces of
STEP 19: Add the final vertical piece of
architrave in place, making sure that all
areas are clicked into position and the
corner joint is a tight fit.
architrave, using a soft mallet if required.
Making sure the architrave is level. Final fix
using pins.
Repeat steps 15 to 18 on the reverse side
of the door.
100
mm
600mm
STEP 16: Using the Hoffmann Key
= Fixing points through the door stop
groove in the lining.
Note: Fire doorsets require additional fixings, please refer to the BWF certifire label.
READYFIT ™ • INSTALLATION GUIDE
15
ADDITIONAL DOORSET APPLICATIONS
JELD-WEN can also manufacture additional specifications for projects that require doorsets
for applications such as communal areas and service cupboards.
RISER DOORSETS
COMMUNAL DOORSETS
JELD-WEN supplies Riser doorsets to conceal and hide
service cupboards and to provide protection in the event
of a fire.
Designed and fire tested specifically for use in riser shafts
running through larger buildings, these doorsets can be
supplied with either a FD30 or FD60 fire rating.
Available in all door styles to suit with other JELD-WEN
doorsets throughout a property, or alternatively they can
be supplied as an entry level paint grade door for painting.
JELD-WEN can machine Riser doorsets for different type of
locks including FB Fire Brigade locks.
Riser doorsets are supplied handed as per your order.
The handing is determined when facing the door, with
the hinge knuckle visible to the left or right side as the
door opens towards you.
JELD-WEN interior doorsets can also be specified
for communal areas. Supplied with either a FD30 or
FD60 fire rating, communal doorsets are designed to
compartmentalise buildings in order to reduce the
spread of fire.
Supplied with appropriate fire door hardware and
intumescent strips fitted as standard, they are also
available with an option for additional smoke seals.
We offer a wide range of Disability Discrimination Act
(DDA) compliant glazed doors in a choice of designs
and styles.
For further information and to discuss you specific project requirements call 0845 122 2891
or alternatively email [email protected]
16
www.jeld-wen.co.uk
Paint Grade, glazed
FD30 fire door
Georgian wired,
painted
17
Real Wood Veneer
White Oak
18
SECUREFIT™
FLAT AND APARTMENT FD30 & FD60 ENTRANCE DOORSETS
JELD-WEN Securefit™ Doorsets are designed specifically for flat and apartment entrance
situations where the highest standards in product performance are required. Available in popular
moulded and veneer designs, these doors can be suited to other doors within the property to offer a
co-ordinated and high quality look throughout.
Available with BWF-certifire approved FD30 and FD60
fire door ratings and Secured by Design certification, the
Securefit™ doorset offers ultimate style and substance.
These doorsets comply with Approved Document M, B, E,
L and Q of the Building Regulations:
Approved Document M: Available in a range of sizes for
wider access.
Approved Document B: Securefit™ doorsets are tested to
BS476 Part 22 and perform to FD30 and FD60 requirement
providing 30-minute and 60-minute fire protection. FD60
only available on Real Wood Veneer and Paint Grade door
options.
Approved Document E: The core construction, acoustic
seals and drop down seals assist this product in compliance
with acoustic regulations where flat entrance doors are
required to have a sound reduction index of 29dBRw.
Approved Document L: JELD-WEN internal flat entrance
doorsets provide improved conservation of fuel and power.
Approved Document Q: JELD-WEN internal flat entrance
doorsets are tested in accordance with PAS 24, the standard
required for compliance with Approved Document Q.
U values
• F D30 Moulded 2.0 W/m2K
• FD30 Flush 2.0 W/m2K
• FD60 Flush 1.8 W/m2K
BS 6375 Part 2: General performance
Requirements for door assemblies:
• Latching test
• Hardware operating test
• Initiate movement test
• Resistance to vertical loads
• Resistance to static torsion
• Slamming resistance
• Resistance to humidity
• Resistance to thermal variation
PAS 24: Enhanced security performance
Requirements for door assemblies:
• Hard and soft impact test
• Mechanical loading test
• Cutting and manipulation test
• Security hardware test
Paint Grade
Entrance
Doorsets
JELD-WEN is a
member of the
BWF-certifire
Fire Door &
Doorset Scheme
Meets the
requirements of
PAS 24 and
Secured By Design
SECUREFIT ™ • FLAT & APARTMENT ENTRANCE DOORSETS
19
STANDARD SPECIFICATION
1
8
4
3
5
2
6
7
1
2
3
4
Viewer
Silver door viewer fitted
as standard.
Adjustable keep
Door keeps are fully
adjustable when adjusting
on site.
Multi-point lock
3-Point multi-point
espagnolette lock.
Handle
Lever handle supplied and
available in satin silver or
chrome (optional).
5
6
7
8
CE certified hinges
Supplied with three Grade
13 hinges in a choice of
satin silver or chrome
(optional).
Drop down seal
A Lorient drop down seal
is supplied for improved
acoustic performance.
Intumescent & acoustic
seals­
Fitted into the head and
jambs of the frames, are
intumescent strips including
smoke and acoustic seals.
Letter plate
Silver letter plate available
as an option.
Additional items available – FD30 letter plate and cowl and aluminium threshold strip.
20
www.jeld-wen.co.uk
ORDERING SECUREFIT™
When ordering your Securefit™ doorsets there are several key factors
you will need to take into consideration:
STRUCTURAL & CLEAR OPENING SIZES
Door Size
Imperial / Metric
App
Doc M
Clear Opening Width
Structural Opening Size
FD30
FD60
1981x838mm (6’6” x 2’9”)
4
2051x938mm
784mm
774mm
1981x864mm (6'6" x 2'10")
4
2051x964mm
810mm
800mm
1981x914mm (6'6" x 3'0")
4
2051x1014mm
860mm
850mm
Metric 2040x926mm
4
2110x1026mm
872mm
862mm
Clear
opening
width
App
BUILDING REGULATIONS
Doc M = APPROVED DOCUMENT M
Handle & Cylinder
Options
Choosing Your
Style of Door
Moulded
pg 22
Real Wood Veneer
22
Paint Grade
22
Satin silver handle and
thumbturn (standard)
Door Handing
MOBILITY PART M
Hinge Options
Doorsets are supplied
with three 100mm
hinges and are
available in a choice
of two finishes.
Satin silver Grade 13
(standard)
Supplied assembled and handed as per your order.
Handing is viewed from the outside of the door
with the door opening away from you. Please state
whether you require right or left hand when ordering.
Chrome Grade 13
(optional)
Optional chrome handle and
thumbturn - if required please
specify on order
Left hand hung
Optional satin silver or
chrome key / key
cylinder
- if required
please specify
on order.
Right hand hung
Frame Choice
66mm
66mm
Softwood primed frame
15mm
13mm
15mm
15mm
Polished silver
FD30 letter plate
967mm from bottom edge of door to
centre of spindle (1981mm high door)
Silver FD60 letter plate
1025mm from bottom edge of door
to centre of spindle (2040mm high
door)
Silver chain
*If measuring from
the bottom of the
jamb add 20mm.
42mm
42mm
15mm
13mm
13mm
13mm
43mm
43mm
FD60
20mm
Silver FD30 letter plate
‘Handle height’
FD30
20mm
Optional Extras
87mm
87mm
Hardwood unfinished frame
Floor Covering Clearance - 20mm
(10mm infill, 10mm drop seal action)
Clearance can be adjusted by cutting or
packing each jamb at the time of installation.
SECUREFIT ™ • STANDARD SPECIFICATION / ORDERING SECUREFIT ™
21
DOOR STYLES
MOULDED PANEL DOORS
NEW
NEWBRIDGE BOSTONIAN OAKFIELD
CAMDEN
ARLINGTON
ATHERTON
CAMBRIDGE ROCKPORT® LINEA
CUBE
SAPELE
KOTO
WHITE OAK
WHITE OAK
INLAY
WALNUT
FUSION
NEWARK
FLUSH DOORS
PAINT
GRADE
PAINT
GRADE
PREMIUM
ASH
WHITE OAK
FUSION
WALNUT
Icon Guide
Smooth finish
Woodgrain finish
22
www.jeld-wen.co.uk
Premium
Paint Grade
IMPORTANT INFORMATION
Delivery
JELD-WEN doorsets should arrive on site shortly before
planned installation; this will avoid unnecessary damage
through handling and general site conditions.
Products should be thoroughly checked when delivered to
ensure no damage has occurred during transport.
Maintenance
All ironmongery should be lubricated on a regular basis
to ensure smooth and correct functioning. JELD-WEN
doorsets can be cleaned using a damp cloth, no abrasive
materials should be used as this can damage the face of
the door.
Doorsets can be delivered in house plots, with standard
ironmongery fitted. Architraves and door stops are fully
machined and packed with the door.
Guarantees
Storage
Doorsets should be stored in a cool, dry place and stacked
level in a horizontal position with a sufficient gap below
the stack to allow air circulation. Please note: do not store
doorsets in buildings that are being plastered or have
recently been completed.
Decoration
If doors are supplied unfinished they should be decorated
in accordance with British Standard Code of Practice
BS6150: 2006 and BS8000 Part 5:1990. The stain or paint
manufacturer’s instructions must be followed.
All surfaces must be treated (sealed) at the same time to
prevent distortion from moisture imbalance. A base coat
stain
or paint primer are in themselves not a seal. MDF foil
wrapped linings, architraves and side panels can be
left unfinished, however, if you wish to decorate we
recommend one coat
of water based gloss paint.
10
Year Guarantee
MANUFACTURING
5
Year Guarantee
FACTORY FINISHED
1
Year Guarantee
IRONMONGERY
JELD-WEN Readyfit™ and Securefit™
doorsets have a 10 year guarantee
against manufacturing defects.
Factory finishing has a 5 year guarantee
providing regular maintenance has been
given to the door.
Ironmongery carries a 1 year guarantee.
For full terms and conditions along with further
information on guarantees please refer to our current
doors catalogue or visit our Resource Centre at
www.jeld-wen.co.uk
JELD-WEN internal joinery is NOT suitable for
waxes, polishes, dyes and oils etc. Please refer to
manufacturers instructions.
IMPORTANT INFORMATION
23
JELD-WEN MANUFACTURES AN EXTENSIVE RANGE
OF JOINERY PRODUCTS.
INTERIOR &
EXTERIOR DOORS
Sales & Enquiries
0845 122 2891
E: [email protected]
WINDOWS,
PATIO DOORSETS,
EXTERIOR TIMBER,
COMPOSITE DOORSETS
& DOOR FRAMES
STAIRS
Sales & Enquiries
0845 122 2894
E: [email protected]
Sales & Enquiries
0845 122 2892
E: [email protected]
For more information visit the website www.jeld-wen.co.uk
SS/MF/JWD2423/2k/JAN2017
JELD-WEN UK LTD
Retford Road
Woodhouse Mill
Sheffield
South Yorkshire UK
S13 9WH
T: 0845 122 2891
E: [email protected]