IR EXTENDER
1. SB-100 IR 300M Receiver
Switcher IR EXT. In
Cable (3C)
Distance: Max.300M
IR Receiver (SB-100)
IR PN#: SB-XXXX
R oHS /95/E C
IR E XT. in
RS - 232
IR EXT .
DC 12V
3
4
4
R S -232
INP UT
-1
4
UT
3
4
3
IR
UT
-4
S WIT
UT
2
R IX
IN P
I MAT
1
SW
1
HDM
2
C HE
-3
R
3
OFF
-2
UT
IN P
ER
2
P OW
IN P
2
ON
1
1
IN P
IR Rx
ANI-100
SB-100 IR Receiver Set
Control Switch SB-XXXX
SB-100 Maximum Distance ~ 984 feet (300M)
The SB-100 IR Receiver is required when using the port “ALL in” Jack.
2. SB-100C IR 2M Receiver
Switcher IR EXT. In
Cable (2C)
Distance: Max.(2M)
IR Receiver cable 6ft (2M)
IR Receiver (SB-100C)
IR PN#: SB-XXXX
R oHS /95/E C
IR E XT. in
RS - 232
IR EXT .
INP UT
DC 12V
4
3
UT
4
-2
3
R
-3
C HE
3
IR
UT
-4
IN P
S WIT
UT
R IX
IN P
2
1
SB-100C Maximum Distance ~ 6 feet (2M)
I MAT
2
1
1
SB-100C IR Receiver Cable
SW
ANI-100
HDM
ER
2
IN P
P OW
UT
2
ON
1
IR Rx
IN P
OFF
-1
3
4
4
R S -232
Control Switch SB-XXXX
The SB-100C IR Receiver will not function on the port “ALL in” Jack.
*** When you plug the External IR extender into the switcher, the front panel IR receiver remains active. ***
Pin configuration for IR 984 feet (300M) Extender Receiver such as SB-100 compatible
Tip: Signal
Tip
Ring :VCC
Sleeve: GND
SB-100 IR Receiver Set
Ring
Sleeve
Ring
VCC (Ring)
GND (Sleeve)
Sleeve
Tip (center)
Signal (center)
SB-100 Receiver and SB-101 Transmitter The DISTANCE maximum ~ 984 feet (300M)
Pin configuration for IR Receiver 6 feet (2M) cable such as SB-100C compatible
IR Receiver cable 6ft (2M)
Tip: Signal
Tip
Ring: NC
Sleeve: GND
SB-100C IR Receiver Cable
Ring
Ring
Sleeve
GND (Sleeve)
Sleeve
Tip (center)
Signal (center)
SB-100 Receiver and SB-101C Transmitter The DISTANCE maximum ~ 984 feet (300M)
Note: The External IR jack has voltage on the “Ring” portion of a 3-conductor plug. You must use a 3-conductor plug (aka: stereo plug).
Using a 2-conductor plug will short out the power supply. Always make connections with the switcher power off.
The frequency range of the IR emitter and receivers is 38khz.