Order-No. EPM304
EPM308
EPM312
EPM316
EPM604
EPM608
EPM612
EPM616
D
D
D
D
D
D
D
D
150.01
151.01
152.01
153.01
159.01
160.01
161.01
162.01
EPM 3xx IP EDGE PAL/NTSC
EPM 6xx IP EDGE PAL/NTSC
 2 RF Inputs
with RF frontend option
(EPM 6xx only)
The IP Edge PAL/NTSC EPM xxx can receive DVB transport streams with MPEG-2
compressed TV services over IP networks and is able to transmodulate these
services directly to analogue RF video channels. 4 ASI input interfaces and in case
of EPM 6xx 2 RF frontends and 2 ASI inputs allows the user to use other transport
stream sources.
The modulator has a separate control interface and can be configured and
operated via a web browser with a standard PC. The implemented SNMP agent
allows the integration in a network management (NMS). An automatic redundancy
switching is implemented. In case of a channel failure the EPM 3xx can automatically switch over to a redundant channel already configured.
The EPM 3xx is ideally suited for IP based remote headends, master headends
and other kinds of cable networks like hotels, hospitals or small communities.
 2/4 ASI Inputs
 IP Input
 Video standards
PAL B/G, PAL D/K
and NTSC
 RF-channels
(max. 16)
47 to 862 MHz
NEW: PAL and NTSC support!
Features
Block Diagram
WEB-Control
Mains
Mains
WEB/
SNMP
Power
Supply
Power
Supply
 2x IP GbE SFP interface for input redundancy
RF
 4 Transport Streams selectable from ASI/IP - Input
RF
DVB-Twin
Frontend
(Option)
 IP-Input Streaming (up to 4 MPTS)
 2/4 ASI Inputs
GbE
Redundant IP
 EPM 6xx 2 RF inputs (DVB-S/S2, DVB-T/C or
DVB-T2)
 Up to 16 modulated TV RF-channels
ASI
ASI
B-EDGE
ASI
 Video standards PAL B/G, PAL D/K, M and NTSC
selectable by software
 Direct Digital Modulation and Up-Conversion (DDS)
 RF-Outputs 47 to 862 MHz
 Control Port 10/100 Mbit RJ45
 Web/SNMP server
 Redundant power supply
ASI
ASI
Inputs
EPM3xx: 4
EPM6xx: 2
Processing Unit
EPM xxx Edge PAL-Modulator
IP
2x2 PAL+UpC
RF
2x2 PAL+UpC (*)
RF
2x2 PAL+UpC (*)
RF
2x2 PAL+UpC (*)
*) EPM 304/604=4 channels
RF
.. EPM 316/616=16 channels
Order-No. EPM304
EPM308
EPM312
EPM316
EPM604
EPM608
EPM612
EPM616
D
D
D
D
D
D
D
D
150.01
151.01
152.01
153.01
159.01
160.01
161.01
162.01
Customer Service Hotline:
+49(0)5063 2711-29
[email protected]
Associated HilKOM Digital
Products
-
EPM 3xx IP EDGE PAL/NTSC
EPM 6xx IP EDGE PAL/NTSC
B-EDGE Family
B-IRD Family
DIP 120/121
B-Trans2
with RF frontend option
Technical Details
GbE IP Input
Input
Data rate
Format
ASI Input
Connector
Reflection/ return loss
Data rate
4 x BNC, 75 Ohm
(According to EN 50083-9)
> 18 dB
max. 200 Mbit/s in total
Decoding
MPEG-2
Video
Audio
MP@HL and lower level
16:9 to letterbox conversion
MPEG-1 Layer 2, down mix to stereo
VBI Processing
Teletext
VPS
WSS
VITS
Video parameter
Video-frequency signal/noise
ratio
Amplitude-frequency
response
Differential gain
Differential phase
Pulse tilt / droop
2-T pulse
Audio Parameter
Signal to noise ratio
Total harmonic distortion
Frequency response
Modulation
Format
Block Diagram
WST Teletext insertion
Line 16 VPS insertion
WSS insertion according to aspect ratio
Line 17, 18, 330, 331
(CCIR or ramp) VITS insertion
 68 dB (line 19, weighted in
conformance with CCIR Rec.567)
  0.5 dB (10 Hz - 5 MHz, CCIR 18)
1.5 %
1.5 °
1.5 %
K=1.5
>
>
>
±
RF-Output
Connector
Frequency range
RF level
F, 75  (according to IEC 61169-24)
47 MHz to 862 MHz (2 channel bundle)
Max.+9 dBm (118 dBµV) @ 47- 470 MHz
Max.+5 dBm (114 dBµV) @ 470-862 MHz
-25 dB adjustable
Level range selection for alarm and
redundancy switching
F, 75 
4, 8, 12, 16
< -64 dBm
Level detection
Output impedance
Number of channels
Spurious
Monitoring/Configuration
Control Port
General
Power consumption
Power supply
EMC
Safety
Environmental
RJ45, LAN, 10/100 Mbit/s, TCP/IP,
SNMP-agent, Web server
max. 100 Watt, depending on channels
100 VAC to 240 VAC 50/60 Hz,
2 separate PSUs for redundancy
horizontal cooling design
EN 50083-2
EN 60950-1
ETSI EN 300019-1-3 Class 3.1
Rear View
EPM 3xx
64 dB unweighted,
60 db weighted
55 dB @ ± 30 kHz deviation
0.8 dB (40 Hz to 15 kHz)
PAL B/G-, D/K-Standard compliant
PAL M/N (optional)
NTSC
EPM 6xx
For frontend specification see DRD 700 frontends.
BLANKOM Antennentechnik GmbH
Hermann-Petersilge-Str. 1
07422 Bad Blankenburg/Germany
Tel.: +49(0) 3 67 41/60 0 · Fax: +49(0) 3 67 41/60 100
[email protected]
HilKOM Digital GmbH
Order Codes
Type:
EPM 304
TecCenter
Ordering code:
D150.01
31162 Bad Salzdetfurth/Germany
Type:
EPM
604
Phone: +49(0) 50 63/27 11 0
Ordering code:
D159.01
Fax: +49(0) 50 63/27 11 60
PAL/NTSC modulated RF channels
4
www.hilkom-digital.de
RF Output connectors:
1
Option IP-GbE-redundancy:
APA150-60,
www.hilkom.com
www.blankom.de
EPM 308
EPM 312
EPM 316
D151.01
D152.01
D153.01
EPM 608
EPM 612
EPM 616
D160.01
D161.01
D162.01
8
12
16
2
3
4
Ordering code: OPD150016000
© 01/2013 HilKOM Digital GmbH - Rev. E V1
Subject to modifications without notice
www.hilkom-digital.de
2 x SFP IP-GbE
(1+1 Redundancy, optional)
max. 200 Mbit/s, 4 Transport Streams
MPTS/SPTS
188 Byte MPEG TS packets in IP,
Uni-, Multicast, RTP,
FEC ProMPEG CoP#3
IGMPv2, IGMPv3